Array Accelerator Board Battery Status.
This monitors the status of each battery pack on the board. The
batteries can only recharge when the system has power applied.
The following values are valid:
Other (1)
Indicates that the instrument agent does not recognize
battery status. You may need to update your software.
Ok (2)
Indicates that a particular battery pack is fully charged.
Charging (3)
The battery power is less than 75%. The Drive Array
Controller is attempting to recharge the battery. A
battery can take as long as 36 hours to fully recharge.
After 36 hours, if the battery has not recharged, it is
considered failed.
Failed (4)
The battery pack is below the sufficient voltage level and
has not recharged in 36 hours. Your Array Accelerator board
needs to be serviced.
Degraded (5)
The battery is still operating, however, one of the batteries
in the pack has failed to recharge properly. Your Array
Accelerator board should be serviced as soon as possible.
NotPresent (6)
There are no batteries associated with this controller.
Parsed from file CPQIDA2.MIB.txt
Company: None
Module: CPQIDA-MIB
Array Accelerator Board Battery Status.
This monitors the status of each battery pack on the board. The
batteries can only recharge when the system has power applied.
The following values are valid:
Other (1)
Indicates that the instrument agent does not recognize
battery status. You may need to update your software.
Ok (2)
Indicates that a particular battery pack is fully charged.
Charging (3)
The battery power is less than 75%. The Drive Array
Controller is attempting to recharge the battery. A
battery can take as long as 36 hours to fully recharge.
After 36 hours, if the battery has not recharged, it is
considered failed.
Failed (4)
The battery pack is below the sufficient voltage level and
has not recharged in 36 hours. Your Array Accelerator board
needs to be serviced.
Degraded (5)
The battery is still operating, however, one of the batteries
in the pack has failed to recharge properly. Your Array
Accelerator board should be serviced as soon as possible.
NotPresent (6)
There are no batteries associated with this controller.
Parsed from file CPQIDA-MIB.mib
Module: CPQIDA-MIB
cpqDaAccelBattery OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), recharging(3), failed(4), degraded(5), notPresent(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Array Accelerator Board Battery Status. This monitors the status of each battery pack on the board. The batteries can only recharge when the system has power applied. The following values are valid: Other (1) Indicates that the instrument agent does not recognize battery status. You may need to update your software. Ok (2) Indicates that a particular battery pack is fully charged. Charging (3) The battery power is less than 75%. The Drive Array Controller is attempting to recharge the battery. A battery can take as long as 36 hours to fully recharge. After 36 hours, if the battery has not recharged, it is considered failed. Failed (4) The battery pack is below the sufficient voltage level and has not recharged in 36 hours. Your Array Accelerator board needs to be serviced. Degraded (5) The battery is still operating, however, one of the batteries in the pack has failed to recharge properly. Your Array Accelerator board should be serviced as soon as possible. NotPresent (6) There are no batteries associated with this controller." ::= { cpqDaAccelEntry 6 }
Vendor: Compaq
Module: CPQIDA-MIB
[Automatically extracted from oidview.com]
cpqDaAccelBattery OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), recharging(3), failed(4), degraded(5), notPresent(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Array Accelerator Board Battery Status. This monitors the status of each battery pack on the board. The batteries can only recharge when the system has power applied. The following values are valid: Other (1) Indicates that the instrument agent does not recognize battery status. You may need to update your software. Ok (2) Indicates that a particular battery pack is fully charged. Charging (3) The battery power is less than 75%. The Drive Array Controller is attempting to recharge the battery. A battery can take as long as 36 hours to fully recharge. After 36 hours, if the battery has not recharged, it is considered failed. Failed (4) The battery pack is below the sufficient voltage level and has not recharged in 36 hours. Your Array Accelerator board needs to be serviced. Degraded (5) The battery is still operating, however, one of the batteries in the pack has failed to recharge properly. Your Array Accelerator board should be serviced as soon as possible. NotPresent (6) There are no batteries associated with this controller." ::= { cpqDaAccelEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.3.2.2.2.1.1 | cpqDaAccelCntlrIndex | 0 | 0 | Array Accelerator Board Controller Index. This value is a logical number whose meaning is OS dependent. The value has a direct ma… |
| 1.3.6.1.4.1.232.3.2.2.2.1.2 | cpqDaAccelStatus | 0 | 0 | Array Accelerator Board Status. This describes the status of the accelerator write cache. The status can be: Other (1) Indicates th… |
| 1.3.6.1.4.1.232.3.2.2.2.1.3 | cpqDaAccelMemory | 0 | 0 | Write Cache Memory. This shows the amount of memory allocated for the write cache in kilobytes. Because data is kept in duplicat… |
| 1.3.6.1.4.1.232.3.2.2.2.1.4 | cpqDaAccelBadData | 0 | 0 | Array Accelerator Board Bad Data. The following values are valid: None (2) Indicates that no data loss occurred. The battery pack… |
| 1.3.6.1.4.1.232.3.2.2.2.1.5 | cpqDaAccelErrCode | 0 | 0 | Array Accelerator Board Error Code. Use this to determine the status of the write cache operations. The status can be: Other (1) In… |
| 1.3.6.1.4.1.232.3.2.2.2.1.7 | cpqDaAccelReadErrs | 0 | 0 | Array Accelerator Board Read Errors. This shows the total number of read memory parity errors that were detected while reading fr… |
| 1.3.6.1.4.1.232.3.2.2.2.1.8 | cpqDaAccelWriteErrs | 0 | 0 | Array Accelerator Board Write Errors. This shows the total number of write memory parity errors that were detected while writing … |
| 1.3.6.1.4.1.232.3.2.2.2.1.9 | cpqDaAccelCondition | 0 | 0 | The condition of the device. This value represents the overall condition of this array accelerator. |
| 1.3.6.1.4.1.232.3.2.2.2.1.10 | cpqDaAccelReadMemory | 0 | 0 | Read Cache Memory. This shows the amount of memory allocated for the read cache in kilobytes. Because data is kept in duplicate … |
| 1.3.6.1.4.1.232.3.2.2.2.1.11 | cpqDaAccelSerialNumber | 0 | 0 | Array Accelerator Serial Number. The serial number of the Array Accelerator. This field will be a null (size 0) string if the ac… |
| 1.3.6.1.4.1.232.3.2.2.2.1.12 | cpqDaAccelTotalMemory | 0 | 0 | Total Cache Memory. This value is the total amount of accelerator memory in kilobytes, including both battery-backed and non-batt… |
| 1.3.6.1.4.1.232.3.2.2.2.1.13 | cpqDaAccelReadCachePercent | 0 | 0 | Read Cache Percent. This shows the percent of cache memory allocated for read ahead caching. If the data cannot be determined or… |
| 1.3.6.1.4.1.232.3.2.2.2.1.14 | cpqDaAccelWriteCachePercent | 0 | 0 | Write Cache Percent. This shows the percent of cache memory allocated for posted write caching. If the data cannot be determined… |
| 1.3.6.1.4.1.232.3.2.2.2.1.15 | cpqDaAccelFailedBatteries | 0 | 0 | Array Accelerator Failed Batteries. This lists the location of accelerator failed batteries. Each octet present contains the posi… |
| 1.3.6.1.4.1.232.3.2.2.2.1.16 | cpqDaAccelBackupPowerSource | 0 | 0 | Array Accelerator Board Backup Power Source. This describes the backup power source being used by the Array Accelerator board. The… |