Vendor: Codan
Module: CODAN-MIB (8800-DMR)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
wvLinkSettings OBJECT IDENTIFIER ::= { wvConfiguration 1 }
wvLinkSettings OBJECT IDENTIFIER ::= { wvConfiguration 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.23304.1.1.1.1.1 | wvLinkId | 1 | 1 | Radio Link ID. The 2 terminals of the link must have the same linkId in order to communicate. This value should be encrypted when… |
1.3.6.1.4.1.23304.1.1.1.1.2 | wvLinkName | 1 | 1 | Radio Link Name. Limited to above size and [a-z, 0-9,-,*] because of the LCD. |
1.3.6.1.4.1.23304.1.1.1.1.3 | wvLinkRouteDescription | 1 | 1 | Radio Link Route. Limited to above size and [a-z, 0-9,-,*] because of the LCD. |
1.3.6.1.4.1.23304.1.1.1.1.4 | wvTxPowerSetting | 1 | 1 | The transmit power value set for this terminal, in 1dBm steps. |
1.3.6.1.4.1.23304.1.1.1.1.5 | wvChannelNo | 1 | 1 | wvChannelNo OBJECT-TYPE SYNTAX INTEGER ( 0..2400 ) MAX-ACCESS read-write DESCRIPTION "The frequency channel to work on. Each ch… |
1.3.6.1.4.1.23304.1.1.1.1.6 | wvLinkCapacity | 1 | 1 | Terminal Link chosen bit rate. Enables reduced capacity work for a given installed plug-in (according to wvInstalledPlugInPartNo… |
1.3.6.1.4.1.23304.1.1.1.1.7 | wvTransmitterMute | 1 | 1 | When 'on', disables this terminal's transmission to the link. Note that disabling transmission sets off an alarm. |
1.3.6.1.4.1.23304.1.1.1.1.8 | wvReceiverMute | 1 | 1 | When 'on', disables this terminal's reception from the link. Since disabling reception is regarded as a kind of alarm, setting of… |
1.3.6.1.4.1.23304.1.1.1.1.9 | wvModulation | 1 | 1 | Sets the terminal radio modulation. Not all values apply to all models. |
1.3.6.1.4.1.23304.1.1.1.1.10 | wvForceAis | 1 | 1 | Defines whether to force Alarm Indication Signal (all 1's) on the link upon either occurence of a link BER Warning or BER Error … |
1.3.6.1.4.1.23304.1.1.1.1.11 | wvFecEnabled | 1 | 1 | Enables/disables the Forward Error Correction option. |
1.3.6.1.4.1.23304.1.1.1.1.12 | wvFecReceiveCorrection | 1 | 1 | Enables/disables Automatic Error Correction on receive. |
1.3.6.1.4.1.23304.1.1.1.1.13 | wvFecNoOfCorrectableBytes | 1 | 1 | Specifies the Forward Error Correction level on transmit. - for LAN plug-in the values are 10 or 20. - for PDH plug-in the values… |
1.3.6.1.4.1.23304.1.1.1.1.14 | wvEth10-100ChannelSpacing | 1 | 1 | Specifies the allowed frequency spacing between adjacent channels for the ETH 10/100 plug-in, as a function of the ODU standard … |
1.3.6.1.4.1.23304.1.1.1.1.30 | wvAtpcControl | 1 | 1 | Enables/disables the ATPC feature. |
1.3.6.1.4.1.23304.1.1.1.1.31 | wvAtpcRslOptimalValue | 1 | 1 | Defines the targeted working RSL value, for ATPC. |
1.3.6.1.4.1.23304.1.1.1.1.32 | wvAtpcRslUpperThreshold | 1 | 1 | Defines the upper threshold for which, if the RSL value is greater than it for more than 10 seconds, the ATPC mechanism (if enab… |
1.3.6.1.4.1.23304.1.1.1.1.33 | wvAtpcRslLowerThreshold | 1 | 1 | Defines the lower threshold for which, if the RSL value is less than it for more than 10 seconds, the ATPC mechanism (if enabled… |
1.3.6.1.4.1.23304.1.1.1.1.34 | wvPauseTransmitterControl | 1 | 1 | Enables/disables the Pause Transmitter feature. |
1.3.6.1.4.1.23304.1.1.1.1.35 | wvPauseTransmitterTime | 1 | 1 | Defines the time in seconds to hold the pause for the transmitter in mute state. |
1.3.6.1.4.1.23304.1.1.1.1.36 | wvE1BNC75ohm | 1 | 1 | set E1 port to 75ohm. |
1.3.6.1.4.1.23304.1.1.1.1.37 | wvAtpcTimeOutControl | 1 | 1 | Enables/disables the ATPC TimeOut feature. |
1.3.6.1.4.1.23304.1.1.1.1.38 | wvAtpcTimeOutTimer | 1 | 1 | Atpc TimeOut timer feature. |
1.3.6.1.4.1.23304.1.1.1.1.39 | wvAtpcTimeOutAlarm | 1 | 1 | Enables/disables the ATPC TimeOut alarm. |
1.3.6.1.4.1.23304.1.1.1.1.40 | wvAtpcTimeOutAlarmLevel | 1 | 1 | declare the ATPC TimeOut alarm level. |
1.3.6.1.4.1.23304.1.1.1.1.41 | wvDisableAtpcInTimeOutAlarm | 1 | 1 | Disable the ATPC if TimeOut alarm in active. |
1.3.6.1.4.1.23304.1.1.1.1.42 | wvEnableSpaceDiversity | 1 | 1 | Enable the Space Diversity feature in 1+1 mode. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.23304.1.1.1.2 | wvInterfaces | 12 | 40 | None |
1.3.6.1.4.1.23304.1.1.1.3 | wvManagement | 51 | 122 | None |
1.3.6.1.4.1.23304.1.1.1.4 | wvRelays | 1 | 9 | None |
1.3.6.1.4.1.23304.1.1.1.5 | wvExternalInputs | 1 | 7 | None |
1.3.6.1.4.1.23304.1.1.1.6 | wvAlarmControl | 40 | 80 | None |
1.3.6.1.4.1.23304.1.1.1.7 | wvComponentsRevisions | 17 | 34 | None |