Vendor: Codan
Module: CODAN-MIB (8800-DMR)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
wvAlarmControl OBJECT IDENTIFIER ::= { wvConfiguration 6 }
wvAlarmControl OBJECT IDENTIFIER ::= { wvConfiguration 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23304.1.1.1.6.1 | wvAlarmsReportToNMSCtrl | 1 | 1 | Defines the severity level of the alarms to be asynchronoulsy reported by the agent to the managers specified in the wvTrapRecepi… |
| 1.3.6.1.4.1.23304.1.1.1.6.2 | wvAlarmsReportToLCDCtrl | 1 | 1 | Defines the severity level of the alarms to be displayed at the front panel LCD. |
| 1.3.6.1.4.1.23304.1.1.1.6.3 | wvNoOfAlertsOnLCD | 1 | 1 | Limits the number of alarms to be displayed at the front panel LCD. |
| 1.3.6.1.4.1.23304.1.1.1.6.4 | wvLinkBERWarningThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link BER warning alarm state. If wvLinkxxxBER in a given wvLinkTh… |
| 1.3.6.1.4.1.23304.1.1.1.6.5 | wvLinkBERWarningThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link BER warning alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.6 | wvLinkBERErrorThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link BER error alarm state. If wvxxxlinkBER in a given wvLinkThre… |
| 1.3.6.1.4.1.23304.1.1.1.6.7 | wvLinkBERErrorThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link BER error alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.8 | wvLinkBLERAlarmThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link Blocks Error Rate alarm state. If wvLinkxxxBLER in a given w… |
| 1.3.6.1.4.1.23304.1.1.1.6.9 | wvLinkBLERAlarmThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link Blocks Error Rate alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.10 | wvLinkBBERAlarmThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link Blocks Background Error Rate alarm state. If wvLinkxxxBBER i… |
| 1.3.6.1.4.1.23304.1.1.1.6.11 | wvLinkBBERAlarmThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link Blocks Error Rate alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.12 | wvLinkNCBLERAlarmThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link Not Corrected Blocks Error Rate alarm state. If wvLinkxxxNCB… |
| 1.3.6.1.4.1.23304.1.1.1.6.13 | wvLinkNCBLERAlarmThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link Not Corrected Blocks Error Rate alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.14 | wvLinkESAlarmThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link Errored Seconds alarm state. If wvLinkxxxESs in a given wvLi… |
| 1.3.6.1.4.1.23304.1.1.1.6.15 | wvLinkESAlarmThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link Errored Seconds alarm state. The value is expressed as a perce… |
| 1.3.6.1.4.1.23304.1.1.1.6.16 | wvLinkSESAlarmThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link Severely Errored Seconds alarm state. If wvLinkxxxSESs in a … |
| 1.3.6.1.4.1.23304.1.1.1.6.17 | wvLinkSESAlarmThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link Severely Errored Seconds alarm state. The value is expressed a… |
| 1.3.6.1.4.1.23304.1.1.1.6.18 | wvLinkDMAlarmThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link Degraded Minutes alarm state. If wvLinkxxxDMs in a given wvL… |
| 1.3.6.1.4.1.23304.1.1.1.6.19 | wvLinkDMAlarmThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link Degraded Minutes alarm state. The value is expressed as a perc… |
| 1.3.6.1.4.1.23304.1.1.1.6.20 | wvLinkUASAlarmThresholdHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link Unavailable Seconds alarm state. If wvLinkxxxUASs in a given… |
| 1.3.6.1.4.1.23304.1.1.1.6.21 | wvLinkUASAlarmThresholdLow | 1 | 1 | Defines the low water mark below which the terminal exits the link Unavailable Seconds alarm state. The value is expressed as a p… |
| 1.3.6.1.4.1.23304.1.1.1.6.22 | wvlinkRSLLowAlarmThresholdhHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link rslLow alarm state. If wvLinkxxxRSL in a given wvLinkThresho… |
| 1.3.6.1.4.1.23304.1.1.1.6.23 | wvlinkRSLLowAlarmThresholdhLow | 1 | 1 | Defines the low water mark below which the terminal exits the link rslLow alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.24 | wvlinkAverageRSLLowAlarmThresholdhHigh | 1 | 1 | Defines the high water mark above which the terminal enters the link averageRSLLow alarm state. If wvLinkxxxAverageRSL in a given… |
| 1.3.6.1.4.1.23304.1.1.1.6.25 | wvlinkAverageRSLLowAlarmThresholdhLow | 1 | 1 | Defines the low water mark below which the terminal exits the link averageRSLLow alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.26 | wvLinkThresholdMeasurementInterval | 1 | 1 | Defines the periodical interval against which the link performance alarm thresholds are to be checked. A value of zero means no l… |
| 1.3.6.1.4.1.23304.1.1.1.6.50 | wvEth10-100CSLAlarmThresholdhHigh | 1 | 1 | Defines the high water mark above which the terminal enters the ETH 10/100 Carrier Sense Lost alarm state. If dot3StatsCarrierSen… |
| 1.3.6.1.4.1.23304.1.1.1.6.51 | wvEth10-100CSLAlarmThresholdhLow | 1 | 1 | Defines the low water mark below which the terminal exits the ETH 10/100 Carrier Sense Lost alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.52 | wvEth10-100ECAlarmThresholdhHigh | 1 | 1 | Defines the high water mark above which the terminal enters the ETH 10/100 Excessive Collisions alarm state. If dot3StatsExcessiv… |
| 1.3.6.1.4.1.23304.1.1.1.6.53 | wvEth10-100ECAlarmThresholdhLow | 1 | 1 | Defines the low water mark below which the terminal exits the ETH 10/100 Excessive Collisions alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.54 | wvEth10-100IMTEAlarmThresholdhHigh | 1 | 1 | Defines the high water mark above which the terminal enters the ETH 10/100 Internal MAC Transmit Errors alarm state. If dot3Stats… |
| 1.3.6.1.4.1.23304.1.1.1.6.55 | wvEth10-100IMTEAlarmThresholdhLow | 1 | 1 | Defines the low water mark below which the terminal exits the ETH 10/100 Internal MAC Transmit Errors alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.56 | wvEth10-100IMREAlarmThresholdhHigh | 1 | 1 | Defines the high water mark above which the terminal enters the ETH 10/100 Internal MAC Receive Errors alarm state. If dot3StatsI… |
| 1.3.6.1.4.1.23304.1.1.1.6.57 | wvEth10-100IMREAlarmThresholdhLow | 1 | 1 | Defines the low water mark below which the terminal exits the ETH 10/100 Internal MAC Receive Errors alarm state. |
| 1.3.6.1.4.1.23304.1.1.1.6.58 | wvEth10-100TxLinkUsageAlarmThresholdLow | 1 | 1 | Low threshold of the actual no. of bits being transmitted by the ETH 10/100 ports to the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.59 | wvEth10-100TxLinkUsageAlarmThresholdHigh | 1 | 1 | High threshold of the actual no. of bits being transmitted by the ETH 10/100 ports to the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.60 | wvEth10-100RxLinkUsageAlarmThresholdLow | 1 | 1 | Low threshold of the actual no. of bits being received by the ETH 10/100 ports from the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.61 | wvEth10-100RxLinkUsageAlarmThresholdHigh | 1 | 1 | High threshold of the actual no. of bits being received by the ETH 10/100 ports from the Link interface. |
| 1.3.6.1.4.1.23304.1.1.1.6.70 | wvEth10-100ThresholdMeasurementInterval | 1 | 1 | Defines the periodical interval against which the ETH 10/100 alarm thresholds are to be checked. A value of zero means no link pe… |
| 1.3.6.1.4.1.23304.1.1.1.6.71 | wvClearAlarmLog | 1 | 1 | use SET wvClearAlarmLog to Clear the alarm log and insert alarm that 'Alarm log was cleared by user' and GET wvClearAlarmLog to … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23304.1.1.1.1 | wvLinkSettings | 27 | 54 | None |
| 1.3.6.1.4.1.23304.1.1.1.2 | wvInterfaces | 12 | 40 | None |
| 1.3.6.1.4.1.23304.1.1.1.3 | wvManagement | 51 | 122 | None |
| 1.3.6.1.4.1.23304.1.1.1.4 | wvRelays | 1 | 9 | None |
| 1.3.6.1.4.1.23304.1.1.1.5 | wvExternalInputs | 1 | 7 | None |
| 1.3.6.1.4.1.23304.1.1.1.7 | wvComponentsRevisions | 17 | 34 | None |