Connection type can be one of the followings:
pvc (1)
Virtual link of a PVC. Should not be
used in an PVC/SVC (i.e., SPVC) crossconnect.
svcIncoming (2)
Virtual link established after a received
signaling request to setup an SVC.
svcOutgoing (3)
Virtual link established after a transmitted
or forwarded signaling request to setup an SVC.
spvcInitiator (4)
Virtual link at the PVC side of an SVC/PVC
crossconnect, where the switch is the initiator
of the SPVC setup.
spvcTarget (5)
Virtual link at the PVC side of an SVC/PVC
crossconnect, where the switch is the target
of the SPVC setup.
This Object is an Obsolete Object.
Parsed from file mariposa.mib.txt
Company: marconi
Module: MARIPOSA-MIB
Vendor: Marconi
Module: MARIPOSA-MIB (mariposa.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmConnectionConnKind OBJECT-TYPE SYNTAX INTEGER { pvc (1), svcIncoming (2), svcOutgoing (3), spvcInitiator (4), spvcTarget (5) } ACCESS read-only STATUS obsolete DESCRIPTION "Connection type can be one of the followings: pvc (1) Virtual link of a PVC. Should not be used in an PVC/SVC (i.e., SPVC) crossconnect. svcIncoming (2) Virtual link established after a received signaling request to setup an SVC. svcOutgoing (3) Virtual link established after a transmitted or forwarded signaling request to setup an SVC. spvcInitiator (4) Virtual link at the PVC side of an SVC/PVC crossconnect, where the switch is the initiator of the SPVC setup. spvcTarget (5) Virtual link at the PVC side of an SVC/PVC crossconnect, where the switch is the target of the SPVC setup. This Object is an Obsolete Object." ::= { atmConnectionEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.1 | atmConnectionVpi | 0 | 0 | VPI number for the connection. The range varies upon the aal2Aal5ParVpiVciRange in the aal2Aal5ParTable. The valid range may be 1.0… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.2 | atmConnectionVci | 0 | 0 | VCI number for the connection. The range varies upon the aal2Aal5ParVpiVciRange in the aal2Aal5ParTable. The valid range may be 1.0… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.3 | atmConnectionDestName | 0 | 0 | Destination name which is index to destination table. This name identifies destination that this connection belongs to. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.5 | atmConnectionDataType | 0 | 0 | Data type that is transmitted over this connection. It can be: 1) VBR Voice, 2) CBR Voice, 3) CES 4) Ethernet Data 5) IWF. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.6 | atmConnectionVcciNo | 0 | 0 | This object has the VCCI number which identifies a PVC voice connection. The value zero is used for data connections and means no… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.7 | atmConnectionPeakCellRate | 0 | 0 | Peak Cell Rate used in VBR traffic. (in unit of ATM cells). 0 means used line rate (Default). Maximum value: 3622 cells/second for … |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.8 | atmConnectionSustainedCellRate | 0 | 0 | Sustained Cell Rate used in VBR traffic. (in unit of ATM cells). 0 means used line rate (Default). Maximum value: 3622 cells/second… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.9 | atmConnectionBurstSize | 0 | 0 | Burst size used in VBR traffic. (in unit of ATM cells). 0 means no burst control (Default). The minimum value of burst size must b… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.10 | atmConnectionBundleNo | 0 | 0 | This object specifies bundle number that is used for the CBR connection.The valid renge is 0 through 35. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.11 | atmConnectionStatus | 0 | 0 | This object enables or disables a connection. This Object is an Obsolete Object. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.12 | atmConnectionVcAisState | 0 | 0 | This object indicates the status of connection regarding received AIS. This object has value of '1' when connection goes into AIS… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.13 | atmConnectionQos | 0 | 0 | Quality of Service.This is for DATA and IWF ONLY. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.14 | atmConnectionRowStatus | 0 | 0 | This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'create… |