Sustained Cell Rate used in VBR traffic. (in unit
of ATM cells).
0 means used line rate (Default).
Maximum value:
3622 cells/second for 1.544 Mbit(T1) speed.
4528 cells/second for 2.048 Mbit(E1) speed.
And, at this moment, this value can not be
dynamically changed once it is created. It
is needed to delete the PVC and recreate it
again.
The valid range is 0 through 353208.
Parsed from file mariposa.mib.txt
Company: marconi
Module: MARIPOSA-MIB
Vendor: Marconi
Module: MARIPOSA-MIB (mariposa.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
0..353208 )
Automatically extracted from www.mibdepot.com
atmConnectionSustainedCellRate OBJECT-TYPE SYNTAX INTEGER (0..353208) ACCESS read-write STATUS mandatory DESCRIPTION "Sustained Cell Rate used in VBR traffic. (in unit of ATM cells). 0 means used line rate (Default). Maximum value: 3622 cells/second for 1.544 Mbit(T1) speed. 4528 cells/second for 2.048 Mbit(E1) speed. And, at this moment, this value can not be dynamically changed once it is created. It is needed to delete the PVC and recreate it again. The valid range is 0 through 353208." ::= { atmConnectionEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.1 | atmConnectionVpi | 0 | 0 | VPI number for the connection. The range varies upon the aal2Aal5ParVpiVciRange in the aal2Aal5ParTable. The valid range may be 1.0… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.2 | atmConnectionVci | 0 | 0 | VCI number for the connection. The range varies upon the aal2Aal5ParVpiVciRange in the aal2Aal5ParTable. The valid range may be 1.0… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.3 | atmConnectionDestName | 0 | 0 | Destination name which is index to destination table. This name identifies destination that this connection belongs to. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.4 | atmConnectionConnKind | 0 | 0 | Connection type can be one of the followings: pvc (1) Virtual link of a PVC. Should not be used in an PVC/SVC (i.e., SPVC) crossco… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.5 | atmConnectionDataType | 0 | 0 | Data type that is transmitted over this connection. It can be: 1) VBR Voice, 2) CBR Voice, 3) CES 4) Ethernet Data 5) IWF. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.6 | atmConnectionVcciNo | 0 | 0 | This object has the VCCI number which identifies a PVC voice connection. The value zero is used for data connections and means no… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.7 | atmConnectionPeakCellRate | 0 | 0 | Peak Cell Rate used in VBR traffic. (in unit of ATM cells). 0 means used line rate (Default). Maximum value: 3622 cells/second for … |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.9 | atmConnectionBurstSize | 0 | 0 | Burst size used in VBR traffic. (in unit of ATM cells). 0 means no burst control (Default). The minimum value of burst size must b… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.10 | atmConnectionBundleNo | 0 | 0 | This object specifies bundle number that is used for the CBR connection.The valid renge is 0 through 35. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.11 | atmConnectionStatus | 0 | 0 | This object enables or disables a connection. This Object is an Obsolete Object. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.12 | atmConnectionVcAisState | 0 | 0 | This object indicates the status of connection regarding received AIS. This object has value of '1' when connection goes into AIS… |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.13 | atmConnectionQos | 0 | 0 | Quality of Service.This is for DATA and IWF ONLY. |
| 1.3.6.1.4.1.2426.1.2.5.1.3.1.14 | atmConnectionRowStatus | 0 | 0 | This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'create… |