Identifies the end of the range of SVPs supported on this link.
Parsed from file gdc-apex.mib
Company: None
Module: DV2-MIB
Identifies the end of the range of SVPs supported on this link.
Parsed from file DV2-MIB.mib
Module: DV2-MIB
Vendor: Netcomm, Ltd.
Module: DV2-MIB
[Automatically extracted from oidview.com]
svcVpEnd OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the end of the range of SVPs supported on this link." ::= { svcResourceEntry 8 }
svcVpEnd OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the end of the range of SVPs supported on this link." ::= { svcResourceEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.251.1.1.18.6.1.1 | svcSAP | 0 | 0 | Identifies the SAP. |
1.3.6.1.4.1.251.1.1.18.6.1.2 | svcHiLo | 0 | 0 | Select VPI/VCI values from low to high or high to low |
1.3.6.1.4.1.251.1.1.18.6.1.3 | svcVciStart | 0 | 0 | Identifies the start of the range of SVC VCI values supported on this link. |
1.3.6.1.4.1.251.1.1.18.6.1.4 | svcVciEnd | 0 | 0 | Identifies the end of the range of SVC VCI values supported on this link. |
1.3.6.1.4.1.251.1.1.18.6.1.5 | svcVpiStart | 0 | 0 | Identifies the start of the range of SVC VPI values supported on this link. |
1.3.6.1.4.1.251.1.1.18.6.1.6 | svcVpiEnd | 0 | 0 | Identifies the end of the range of SVC VPI values supported on this link. |
1.3.6.1.4.1.251.1.1.18.6.1.7 | svcVpStart | 0 | 0 | Identifies the start of the range of SVPs supported on this link. |
1.3.6.1.4.1.251.1.1.18.6.1.11 | svcBackwardCellRateTotal | 0 | 0 | The backward total cell rate configured for SVCs on this link. Note that this object is in cells per second (CPS). |
1.3.6.1.4.1.251.1.1.18.6.1.12 | svcBackwardCellRateAvailable | 0 | 0 | The backward cell rate available for SVCs on this link. Note that this object is in cells per second (CPS). |
1.3.6.1.4.1.251.1.1.18.6.1.13 | svcSigVci | 0 | 0 | The VCI used for signalling. |
1.3.6.1.4.1.251.1.1.18.6.1.14 | svcSigVpi | 0 | 0 | The VPI used for signalling. |
1.3.6.1.4.1.251.1.1.18.6.1.15 | svcSAPStatus | 0 | 0 | Select on(4) to activate the SAP, off(1) to deactivate, reconfigure(2) to hot reconfigure the vci/vpi ranges and reset(3) to cl… |
1.3.6.1.4.1.251.1.1.18.6.1.16 | svcCDVTSize | 0 | 0 | Cell Delay Variation Tolerance size. |
1.3.6.1.4.1.251.1.1.18.6.1.17 | svcIntType | 0 | 0 | Interface type - NETWORK or USER. |
1.3.6.1.4.1.251.1.1.18.6.1.18 | svcPolicing | 0 | 0 | Policing - ON or OFF |
1.3.6.1.4.1.251.1.1.18.6.1.19 | svcLowPriOverbookFactor | 0 | 0 | This is the percentage of low priority traffic overbook factor. |
1.3.6.1.4.1.251.1.1.18.6.1.20 | svcMaxSapConn | 0 | 0 | Maximum SVCs this SAP |
1.3.6.1.4.1.251.1.1.18.6.1.21 | svcCurSapConn | 0 | 0 | Current SVC count this SAP |
1.3.6.1.4.1.251.1.1.18.6.1.22 | svcLinkNo | 0 | 0 | This is the physical link number associated with this SAP |
1.3.6.1.4.1.251.1.1.18.6.1.23 | svcVpiMapping | 0 | 0 | VPI and VPCI mapping status |
1.3.6.1.4.1.251.1.1.18.6.1.24 | svcQosRoute | 0 | 0 | QoS based route |
1.3.6.1.4.1.251.1.1.18.6.1.25 | svcSwtch | 0 | 0 | UNI Interface Type |
1.3.6.1.4.1.251.1.1.18.6.1.26 | svcRestart | 0 | 0 | Send Restart when link is up |
1.3.6.1.4.1.251.1.1.18.6.1.27 | svcE164Addr | 0 | 0 | The E.164 address for this SAP |
1.3.6.1.4.1.251.1.1.18.6.1.28 | svcAutoSapOff | 0 | 0 | This option allows a Sap Status to be automatically turned OFF after T309 expiry. Select Yes(1) if a sap (which was ON before) … |