The number of packets sent out on the VC.
Parsed from file mib-jnx-atm_2.txt
Company: None
Module: JUNIPER-ATM-MIB
The number of packets sent out on the VC.
Parsed from file JUNIPER-ATM-MIB.mib
Module: JUNIPER-ATM-MIB
Vendor: Juniper Networks, Inc.
Module: JUNIPER-ATM-MIB
[Automatically extracted from oidview.com]
jnxAtmVCOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent out on the VC." ::= { jnxAtmVCEntry 10 }
jnxAtmVCOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent out on the VC." ::= { jnxAtmVCEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.10.2.1.1 | jnxAtmVCConnType | 0 | 0 | The type of connection. The type 'other' means vc type is unknown or is not one of the other types. |
| 1.3.6.1.4.1.2636.3.10.2.1.2 | jnxAtmVCEncapsulation | 0 | 0 | The atm encapsulation type associated with the VC. atmCccCellRelay : ATM Cell Relay for CCC atmCccVcMux : ATM VC for CCC atmCi… |
| 1.3.6.1.4.1.2636.3.10.2.1.3 | jnxAtmVCMpDestIPv4Addr | 0 | 0 | This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint dest… |
| 1.3.6.1.4.1.2636.3.10.2.1.4 | jnxAtmVCMpDestIPv6Addr | 0 | 0 | This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint dest… |
| 1.3.6.1.4.1.2636.3.10.2.1.5 | jnxAtmVCFlags | 0 | 0 | Flags related to the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.6 | jnxAtmVCTotalDownTime | 0 | 0 | The total VC down time in seconds ever since the system rebooted. |
| 1.3.6.1.4.1.2636.3.10.2.1.7 | jnxAtmVCInBytes | 0 | 0 | The number of bytes received on the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.8 | jnxAtmVCOutBytes | 0 | 0 | The number of bytes sent out on the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.9 | jnxAtmVCInPkts | 0 | 0 | The number of packets received on the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.11 | jnxAtmVCTailQueuePktDrops | 0 | 0 | The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than … |
| 1.3.6.1.4.1.2636.3.10.2.1.12 | jnxAtmVCOAMPeriod | 0 | 0 | This time interval indicates how often the F5 cells are sent to know the status of the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.13 | jnxAtmVCOAMUpCellCount | 0 | 0 | The minimum number of loopback cells to be received to declare that the VC is up. |
| 1.3.6.1.4.1.2636.3.10.2.1.14 | jnxAtmVCOAMDownCellCount | 0 | 0 | The minimum number of loopback cells to be received to declare that the VC is down. This object would have zero value if OAM is n… |
| 1.3.6.1.4.1.2636.3.10.2.1.15 | jnxAtmVCInOAMF5LoopCells | 0 | 0 | The number of OAM F5 loopback cells received. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not ena… |
| 1.3.6.1.4.1.2636.3.10.2.1.16 | jnxAtmVCOutOAMF5LoopCells | 0 | 0 | The number of OAM F5 loopback cells sent. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. |
| 1.3.6.1.4.1.2636.3.10.2.1.17 | jnxAtmVCInOAMF5RDICells | 0 | 0 | The number of OAM F5 cells received, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as ind… |
| 1.3.6.1.4.1.2636.3.10.2.1.18 | jnxAtmVCOutOAMF5RDICells | 0 | 0 | The number of OAM F5 cells transmitted, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as … |
| 1.3.6.1.4.1.2636.3.10.2.1.19 | jnxAtmVCInOAMF5AISCells | 0 | 0 | The number of OAM F5 cells received, with AIS(Alarm Indication Signal) bit set. This object would have zero value if OAM (as indi… |
| 1.3.6.1.4.1.2636.3.10.2.1.20 | jnxAtmVCOutOAMF5AISCells | 0 | 0 | The number of OAM F5 cells transmitted, with AIS (Alarm Indication Signal) bit set. This object would have zero value if OAM (as … |