The minimum number of loopback cells to be received to declare
that the VC is down. This object would have zero value if OAM is
not enabled. (indicated in jnxAtmVCFlags)
Parsed from file mib-jnx-atm_2.txt
Company: None
Module: JUNIPER-ATM-MIB
The minimum number of loopback cells to be received to declare
that the VC is down. This object would have zero value if OAM is
not enabled. (indicated in jnxAtmVCFlags)
Parsed from file JUNIPER-ATM-MIB.mib
Module: JUNIPER-ATM-MIB
Vendor: Juniper Networks, Inc.
Module: JUNIPER-ATM-MIB
[Automatically extracted from oidview.com]
jnxAtmVCOAMDownCellCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of loopback cells to be received to declare that the VC is down. This object would have zero value if OAM is not enabled. (indicated in jnxAtmVCFlags)" ::= { jnxAtmVCEntry 14 }
jnxAtmVCOAMDownCellCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of loopback cells to be received to declare that the VC is down. This object would have zero value if OAM is not enabled. (indicated in jnxAtmVCFlags)" ::= { jnxAtmVCEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.10.2.1.1 | jnxAtmVCConnType | 0 | 0 | The type of connection. The type 'other' means vc type is unknown or is not one of the other types. |
| 1.3.6.1.4.1.2636.3.10.2.1.2 | jnxAtmVCEncapsulation | 0 | 0 | The atm encapsulation type associated with the VC. atmCccCellRelay : ATM Cell Relay for CCC atmCccVcMux : ATM VC for CCC atmCi… |
| 1.3.6.1.4.1.2636.3.10.2.1.3 | jnxAtmVCMpDestIPv4Addr | 0 | 0 | This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint dest… |
| 1.3.6.1.4.1.2636.3.10.2.1.4 | jnxAtmVCMpDestIPv6Addr | 0 | 0 | This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint dest… |
| 1.3.6.1.4.1.2636.3.10.2.1.5 | jnxAtmVCFlags | 0 | 0 | Flags related to the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.6 | jnxAtmVCTotalDownTime | 0 | 0 | The total VC down time in seconds ever since the system rebooted. |
| 1.3.6.1.4.1.2636.3.10.2.1.7 | jnxAtmVCInBytes | 0 | 0 | The number of bytes received on the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.8 | jnxAtmVCOutBytes | 0 | 0 | The number of bytes sent out on the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.9 | jnxAtmVCInPkts | 0 | 0 | The number of packets received on the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.10 | jnxAtmVCOutPkts | 0 | 0 | The number of packets sent out on the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.11 | jnxAtmVCTailQueuePktDrops | 0 | 0 | The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than … |
| 1.3.6.1.4.1.2636.3.10.2.1.12 | jnxAtmVCOAMPeriod | 0 | 0 | This time interval indicates how often the F5 cells are sent to know the status of the VC. |
| 1.3.6.1.4.1.2636.3.10.2.1.13 | jnxAtmVCOAMUpCellCount | 0 | 0 | The minimum number of loopback cells to be received to declare that the VC is up. |
| 1.3.6.1.4.1.2636.3.10.2.1.15 | jnxAtmVCInOAMF5LoopCells | 0 | 0 | The number of OAM F5 loopback cells received. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not ena… |
| 1.3.6.1.4.1.2636.3.10.2.1.16 | jnxAtmVCOutOAMF5LoopCells | 0 | 0 | The number of OAM F5 loopback cells sent. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. |
| 1.3.6.1.4.1.2636.3.10.2.1.17 | jnxAtmVCInOAMF5RDICells | 0 | 0 | The number of OAM F5 cells received, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as ind… |
| 1.3.6.1.4.1.2636.3.10.2.1.18 | jnxAtmVCOutOAMF5RDICells | 0 | 0 | The number of OAM F5 cells transmitted, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as … |
| 1.3.6.1.4.1.2636.3.10.2.1.19 | jnxAtmVCInOAMF5AISCells | 0 | 0 | The number of OAM F5 cells received, with AIS(Alarm Indication Signal) bit set. This object would have zero value if OAM (as indi… |
| 1.3.6.1.4.1.2636.3.10.2.1.20 | jnxAtmVCOutOAMF5AISCells | 0 | 0 | The number of OAM F5 cells transmitted, with AIS (Alarm Indication Signal) bit set. This object would have zero value if OAM (as … |