This object enables or disables the transfer of extra traffic
on the protection channel in a 1:n architecture. This object
must be set to disabled if the architecture is 1+1. It may be
necessary to disable this in order to interwork with other SONET
network elements that don't support extra traffic.
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).
Parsed from file mib-jnx-sonetaps.txt
Company: juniper
Module: APS-MIB
Vendor: Juniper Networks, Inc.
Module: APS-MIB
[Automatically extracted from oidview.com]
apsConfigExtraTraffic OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object must be set to disabled if the architecture is 1+1. It may be necessary to disable this in order to interwork with other SONET network elements that don't support extra traffic. This object may not be modified if the associated apsConfigRowStatus object is equal to active(1). " DEFVAL { disabled } ::= { apsConfigEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.1 | apsConfigName | 0 | 0 | A textual name for the APS group. |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.2 | apsConfigRowStatus | 0 | 0 | The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriat… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.3 | apsConfigMode | 0 | 0 | The architecture of the APS group. onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. one… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.4 | apsConfigRevert | 0 | 0 | The revertive mode of the APS group. nonrevertive Traffic remains on the protection line until another switch request is received.… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.5 | apsConfigDirection | 0 | 0 | The directional mode of the APS group. unidirectional The unidirectional mode provides protection in one direction. bidirectional T… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.7 | apsConfigSdBerThreshold | 0 | 0 | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.8 | apsConfigSfBerThreshold | 0 | 0 | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.9 | apsConfigWaitToRestore | 0 | 0 | The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore p… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.10 | apsConfigCreationTime | 0 | 0 | The value of sysUpTime at the time the row was created |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.11 | apsConfigStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |