The Wait To Restore period in seconds.
After clearing of a condition that necessitated an
automatic switch, the wait to restore period must elapse
before reverting. This is intended to avoid rapid switch
oscillations.
GR-253-CORE specifies a Wait To Restore range of 5 to 12
minutes. G.783 defines a 5 to 12 minute Wait To Restore
range in section 5.4.1.1.3, but also allows for a shorter
WTR period in Table 2-1,
WaitToRestore value (MI_WTRtime: 0..(5)..12 minutes).
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).
Parsed from file mib-jnx-sonetaps.txt
Company: juniper
Module: APS-MIB
Vendor: Juniper Networks, Inc.
Module: APS-MIB
[Automatically extracted from oidview.com]
apsConfigWaitToRestore OBJECT-TYPE SYNTAX Integer32 (0..720) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore period must elapse before reverting. This is intended to avoid rapid switch oscillations. GR-253-CORE specifies a Wait To Restore range of 5 to 12 minutes. G.783 defines a 5 to 12 minute Wait To Restore range in section 5.4.1.1.3, but also allows for a shorter WTR period in Table 2-1, WaitToRestore value (MI_WTRtime: 0..(5)..12 minutes). This object may not be modified if the associated apsConfigRowStatus object is equal to active(1)." DEFVAL { 300 } ::= { apsConfigEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.1 | apsConfigName | 0 | 0 | A textual name for the APS group. |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.2 | apsConfigRowStatus | 0 | 0 | The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriat… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.3 | apsConfigMode | 0 | 0 | The architecture of the APS group. onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. one… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.4 | apsConfigRevert | 0 | 0 | The revertive mode of the APS group. nonrevertive Traffic remains on the protection line until another switch request is received.… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.5 | apsConfigDirection | 0 | 0 | The directional mode of the APS group. unidirectional The unidirectional mode provides protection in one direction. bidirectional T… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.6 | apsConfigExtraTraffic | 0 | 0 | This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object must b… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.7 | apsConfigSdBerThreshold | 0 | 0 | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.8 | apsConfigSfBerThreshold | 0 | 0 | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.10 | apsConfigCreationTime | 0 | 0 | The value of sysUpTime at the time the row was created |
| 1.3.6.1.4.1.2636.3.24.1.1.2.1.11 | apsConfigStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |