jnxpwTDMCfgSetUp2SynchtimeOut
View at oid-info.com
The amount of time the host should wait before declaring the
pseudo wire in down state, if the number of consecutive
TDM packets that have been received after changing the
adminstrative status to up and after finalization of
signaling (if supported) between the two PEs is smaller
than pwTDMCfgConsecPktsInSynch. Once the the pw has
OperStatus of 'up' this parameter is no longer valid. This
parameter is defined to ensure that the host does not
prematurely inform failure of the pw. In particular pw 'down'
notifications should not be sent before expiration of this
timer. This parameter is valid only after adminisrative
changes of the status of the pw. If the pw fails due to
network impairments a 'down' notification should be sent.
Object MAY be changed when the related PW is
defined as not active.
Parsed from file JUNIPER-PW-TDM-MIB.mib
Module: JUNIPER-PW-TDM-MIB
Vendor: Juniper Networks, Inc.
Module: JUNIPER-PW-TDM-MIB
[Automatically extracted from oidview.com]
jnxpwTDMCfgSetUp2SynchTimeOut OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the adminstrative status to up and after finalization of signaling (if supported) between the two PEs is smaller than pwTDMCfgConsecPktsInSynch. Once the the pw has OperStatus of 'up' this parameter is no longer valid. This parameter is defined to ensure that the host does not prematurely inform failure of the pw. In particular pw 'down' notifications should not be sent before expiration of this timer. This parameter is valid only after adminisrative changes of the status of the pw. If the pw fails due to network impairments a 'down' notification should be sent. Object MAY be changed when the related PW is defined as not active." DEFVAL {5000} ::= { jnxpwTDMCfgEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.1 | jnxpwTDMCfgIndex | 0 | 0 | Index to an entry in this table. The value is a copy of the assigned pwTDMCfgIndexNext |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.2 | jnxpwTDMCfgRowStatus | 0 | 0 | Object used for creating, modifying, and deleting a row from this table. The following objects should not be modified if the entr… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.4 | jnxpwTDMCfgPayloadSize | 0 | 0 | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.5 | jnxpwTDMCfgPktReorder | 0 | 0 | If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence numbe… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.6 | jnxpwTDMCfgRtpHdrUsed | 0 | 0 | If set to False: an RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.7 | jnxpwTDMCfgJtrBfrDepth | 0 | 0 | The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configu… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.8 | jnxpwTDMCfgPayloadSuppression | 0 | 0 | Selecting 'enable' means: Payload suppression is allowed. Payload MAY be omitted in order to conserve bandwidth. Selecting 'disab… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.9 | jnxpwTDMCfgConsecPktsInSynch | 0 | 0 | The number of consecutive packets with sequential sequence numbers that are required to exit the LOPS state. Object MAY be change… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.10 | jnxpwTDMCfgConsecMissPktsOutSynch | 0 | 0 | The number of consecutive missing packets that are required to enter the LOPS state. Object MAY be changed when the related PW i… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.12 | jnxpwTDMCfgPktReplacePolicy | 0 | 0 | This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for … |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.13 | jnxpwTDMCfgAvePktLossTimeWindow | 0 | 0 | The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate. Object MAY be… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.14 | jnxpwTDMCfgExcessivePktLossThreshold | 0 | 0 | Excessive packet loss rate is detected by computing the average packetloss rate over a pwTDMCfgAvePktLossTimeWindow amount of tim… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.15 | jnxpwTDMCfgAlarmThreshold | 0 | 0 | Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is mil… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.16 | jnxpwTDMCfgClearAlarmThreshold | 0 | 0 | Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's … |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.17 | jnxpwTDMCfgMissingPktsToSes | 0 | 0 | Percent of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be co… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.18 | jnxpwTDMCfgTimestampMode | 0 | 0 | Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the cloc… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.19 | jnxpwTDMCfgStorageType | 0 | 0 | This variable indicates the storage type for this row. |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.20 | jnxpwTDMCfgPktFiller | 0 | 0 | Filler byte pattern played out on the TDM interface if pwTDMCfgPktReplacePolicy was set to filler(3). Object MAY be changed when … |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.21 | jnxpwTDMCfgName | 0 | 0 | A descriptive string, prefereably unique name, to an entry in this table. Object MAY be changed at any time. |