Object used for creating, modifying, and deleting
a row from this table. The following objects should not be
modified if the entry is in used and the status is active:
pwTDMCfgPayloadSize, pwTDMCfgRtpHdrUsed,
pwTDMCfgJtrBfrDepth, and pwTDMCfgPayloadSuppression.
The row should not be deleted if the entry is in used
Parsed from file JUNIPER-PW-TDM-MIB.mib
Module: JUNIPER-PW-TDM-MIB
Vendor: Juniper Networks, Inc.
Module: JUNIPER-PW-TDM-MIB
[Automatically extracted from oidview.com]
jnxpwTDMCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Object used for creating, modifying, and deleting a row from this table. The following objects should not be modified if the entry is in used and the status is active: pwTDMCfgPayloadSize, pwTDMCfgRtpHdrUsed, pwTDMCfgJtrBfrDepth, and pwTDMCfgPayloadSuppression. The row should not be deleted if the entry is in used" ::= { jnxpwTDMCfgEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.1 | jnxpwTDMCfgIndex | 0 | 0 | Index to an entry in this table. The value is a copy of the assigned pwTDMCfgIndexNext |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.4 | jnxpwTDMCfgPayloadSize | 0 | 0 | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.5 | jnxpwTDMCfgPktReorder | 0 | 0 | If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence numbe… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.6 | jnxpwTDMCfgRtpHdrUsed | 0 | 0 | If set to False: an RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.7 | jnxpwTDMCfgJtrBfrDepth | 0 | 0 | The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configu… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.8 | jnxpwTDMCfgPayloadSuppression | 0 | 0 | Selecting 'enable' means: Payload suppression is allowed. Payload MAY be omitted in order to conserve bandwidth. Selecting 'disab… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.9 | jnxpwTDMCfgConsecPktsInSynch | 0 | 0 | The number of consecutive packets with sequential sequence numbers that are required to exit the LOPS state. Object MAY be change… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.10 | jnxpwTDMCfgConsecMissPktsOutSynch | 0 | 0 | The number of consecutive missing packets that are required to enter the LOPS state. Object MAY be changed when the related PW i… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.11 | jnxpwTDMCfgSetUp2SynchTimeOut | 0 | 0 | jnxpwTDMCfgSetUp2SynchtimeOut |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.12 | jnxpwTDMCfgPktReplacePolicy | 0 | 0 | This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for … |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.13 | jnxpwTDMCfgAvePktLossTimeWindow | 0 | 0 | The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate. Object MAY be… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.14 | jnxpwTDMCfgExcessivePktLossThreshold | 0 | 0 | Excessive packet loss rate is detected by computing the average packetloss rate over a pwTDMCfgAvePktLossTimeWindow amount of tim… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.15 | jnxpwTDMCfgAlarmThreshold | 0 | 0 | Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is mil… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.16 | jnxpwTDMCfgClearAlarmThreshold | 0 | 0 | Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's … |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.17 | jnxpwTDMCfgMissingPktsToSes | 0 | 0 | Percent of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be co… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.18 | jnxpwTDMCfgTimestampMode | 0 | 0 | Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the cloc… |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.19 | jnxpwTDMCfgStorageType | 0 | 0 | This variable indicates the storage type for this row. |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.20 | jnxpwTDMCfgPktFiller | 0 | 0 | Filler byte pattern played out on the TDM interface if pwTDMCfgPktReplacePolicy was set to filler(3). Object MAY be changed when … |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.21 | jnxpwTDMCfgName | 0 | 0 | A descriptive string, prefereably unique name, to an entry in this table. Object MAY be changed at any time. |