The OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3.
Parsed from file mib-jnx-ospfv3mib.txt
Company: None
Module: OSPFV3-MIB-JUNIPER
The OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3.
Parsed from file OSPFV3-MIB-JUNIPER.mib
Module: OSPFV3-MIB-JUNIPER
Vendor: Juniper Networks, Inc.
Module: OSPFV3-MIB-JUNIPER
[Automatically extracted from oidview.com]
jnxOspfv3IfEntry OBJECT-TYPE SYNTAX JnxOspfv3IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3." INDEX { jnxOspfv3IfIndex, jnxOspfv3IfInstId } ::= { jnxOspfv3IfTable 1 }
jnxOspfv3IfEntry OBJECT-TYPE SYNTAX JnxOspfv3IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3." INDEX { jnxOspfv3IfIndex, jnxOspfv3IfInstId } ::= { jnxOspfv3IfTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.1 | jnxOspfv3IfIndex | 0 | 0 | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is conf… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.2 | jnxOspfv3IfInstId | 0 | 0 | Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate … |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.3 | jnxOspfv3IfAreaId | 0 | 0 | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.4 | jnxOspfv3IfType | 0 | 0 | jnxOspfv3Iftype |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.5 | jnxOspfv3IfAdminStat | 0 | 0 | The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an inter… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.6 | jnxOspfv3IfRtrPriority | 0 | 0 | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. Th… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.7 | jnxOspfv3IfTransitDelay | 0 | 0 | jnxOspfv3IftransitDelay |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.8 | jnxOspfv3IfRetransInterval | 0 | 0 | The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value i… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.9 | jnxOspfv3IfHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.10 | jnxOspfv3IfRtrDeadInterval | 0 | 0 | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interf… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.11 | jnxOspfv3IfPollInterval | 0 | 0 | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.12 | jnxOspfv3IfState | 0 | 0 | The OSPFv3 Interface State. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.13 | jnxOspfv3IfDesignatedRouter | 0 | 0 | The Router ID of the Designated Router. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.14 | jnxOspfv3IfBackupDesignatedRouter | 0 | 0 | The Router ID of the Backup Designated Router. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.15 | jnxOspfv3IfEvents | 0 | 0 | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.16 | jnxOspfv3IfStatus | 0 | 0 | This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.17 | jnxOspfv3IfMulticastForwarding | 0 | 0 | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data lin… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.18 | jnxOspfv3IfDemand | 0 | 0 | Indicates whether Demand OSPFv3 procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs)… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.19 | jnxOspfv3IfMetricValue | 0 | 0 | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the referenc… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.20 | jnxOspfv3IfLinkScopeLsaCount | 0 | 0 | The total number of Link-Scope link state advertisements in this link's link state database. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.21 | jnxOspfv3IfLinkLsaCksumSum | 0 | 0 | The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. T… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.22 | jnxOspfv3IfDemandNbrProbe | 0 | 0 | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is di… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.23 | jnxOspfv3IfDemandNbrProbeRetxLimit | 0 | 0 | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.24 | jnxOspfv3IfDemandNbrProbeInterval | 0 | 0 | Defines how often the neighbor will be probed. |