The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.
Parsed from file mib-jnx-ospfv3mib.txt
Company: None
Module: OSPFV3-MIB-JUNIPER
The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.
Parsed from file OSPFV3-MIB-JUNIPER.mib
Module: OSPFV3-MIB-JUNIPER
Vendor: Juniper Networks, Inc.
Module: OSPFV3-MIB-JUNIPER
[Automatically extracted from oidview.com]
jnxOspfv3IfHelloInterval OBJECT-TYPE SYNTAX HelloRange UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network." DEFVAL { 10 } ::= { jnxOspfv3IfEntry 9 }
jnxOspfv3IfHelloInterval OBJECT-TYPE SYNTAX HelloRange UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network." DEFVAL { 10 } ::= { jnxOspfv3IfEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.1 | jnxOspfv3IfIndex | 0 | 0 | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is conf… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.2 | jnxOspfv3IfInstId | 0 | 0 | Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate … |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.3 | jnxOspfv3IfAreaId | 0 | 0 | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.4 | jnxOspfv3IfType | 0 | 0 | jnxOspfv3Iftype |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.5 | jnxOspfv3IfAdminStat | 0 | 0 | The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an inter… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.6 | jnxOspfv3IfRtrPriority | 0 | 0 | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. Th… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.7 | jnxOspfv3IfTransitDelay | 0 | 0 | jnxOspfv3IftransitDelay |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.8 | jnxOspfv3IfRetransInterval | 0 | 0 | The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value i… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.10 | jnxOspfv3IfRtrDeadInterval | 0 | 0 | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interf… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.11 | jnxOspfv3IfPollInterval | 0 | 0 | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.12 | jnxOspfv3IfState | 0 | 0 | The OSPFv3 Interface State. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.13 | jnxOspfv3IfDesignatedRouter | 0 | 0 | The Router ID of the Designated Router. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.14 | jnxOspfv3IfBackupDesignatedRouter | 0 | 0 | The Router ID of the Backup Designated Router. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.15 | jnxOspfv3IfEvents | 0 | 0 | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.16 | jnxOspfv3IfStatus | 0 | 0 | This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.17 | jnxOspfv3IfMulticastForwarding | 0 | 0 | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data lin… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.18 | jnxOspfv3IfDemand | 0 | 0 | Indicates whether Demand OSPFv3 procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs)… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.19 | jnxOspfv3IfMetricValue | 0 | 0 | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the referenc… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.20 | jnxOspfv3IfLinkScopeLsaCount | 0 | 0 | The total number of Link-Scope link state advertisements in this link's link state database. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.21 | jnxOspfv3IfLinkLsaCksumSum | 0 | 0 | The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. T… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.22 | jnxOspfv3IfDemandNbrProbe | 0 | 0 | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is di… |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.23 | jnxOspfv3IfDemandNbrProbeRetxLimit | 0 | 0 | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| 1.3.6.1.4.1.2636.5.4.1.1.7.1.24 | jnxOspfv3IfDemandNbrProbeInterval | 0 | 0 | Defines how often the neighbor will be probed. |