Local IP address. If this object is set, it's value will be
used as the source address for all IP packets that are sent.
Otherwise, the IP address used will be retrieved from the
ipRouteTable, for the interface the IP packet is to be
transmitted over.
Parsed from file mibboxopt.mib.txt
Company: None
Module: BIANCA-BRICK-MIB
Local IP address. If this object is set, it's value will be
used as the source address for all IP packets that are sent.
Otherwise, the IP address used will be retrieved from the
ipRouteTable, for the interface the IP packet is to be
transmitted over.
Parsed from file BIANCA-BRICK-MIB.mib
Module: BIANCA-BRICK-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-MIB
[Automatically extracted from oidview.com]
biboAdmIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Local IP address. If this object is set, it's value will be used as the source address for all IP packets that are sent. Otherwise, the IP address used will be retrieved from the ipRouteTable, for the interface the IP packet is to be transmitted over." ::= { admin 8 }
biboAdmIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Local IP address. If this object is set, it's value will be used as the source address for all IP packets that are sent. Otherwise, the IP address used will be retrieved from the ipRouteTable, for the interface the IP packet is to be transmitted over." ::= { admin 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.1.8.0 | biboAdmIpAddr | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.1.4 | biboAdmTrapCommunity | 1 | 1 | Community name for sending traps. |
| 1.3.6.1.4.1.272.4.1.5 | biboAdmSnmpVersion | 1 | 1 | SNMP Version. version1 : SNMP version V1 version1_compat : SNMP version V1 compatibility mode without the appending private… |
| 1.3.6.1.4.1.272.4.1.6 | biboAdmSnmpPort | 1 | 1 | SNMP listen port. |
| 1.3.6.1.4.1.272.4.1.7 | biboAdmSnmpTrapPort | 1 | 1 | SNMP trap port. |
| 1.3.6.1.4.1.272.4.1.9 | biboAdmTrapBrdCast | 1 | 1 | Enable/disable trap broadcasting. |
| 1.3.6.1.4.1.272.4.1.10 | biboAdmTrapHostTable | 1 | 3 | The biboAdmTrapHostTable defines where traps are sent (i.e., which hosts). If the table is empty traps are broadcasted. Creating … |
| 1.3.6.1.4.1.272.4.1.11 | biboAdmSyslogMaxEntries | 1 | 1 | Maximum Number of syslog messages stored in memory. |
| 1.3.6.1.4.1.272.4.1.12 | biboAdmSyslogTable | 1 | 5 | The biboAdmSyslogTable keeps track of syslog messages received. The size of the table (number of entries), is limited by the valu… |
| 1.3.6.1.4.1.272.4.1.13 | biboAdmLogHostTable | 1 | 6 | The biboAdmLogHostTable lists hosts which are to receive syslog messages. This table also defines which types and levels of messa… |
| 1.3.6.1.4.1.272.4.1.14 | biboAdmConfigTable | 1 | 9 | The biboAdmConfigTable is used for assigning parameters for managing configuration files. Creating entries: Entries are added to … |
| 1.3.6.1.4.1.272.4.1.15 | biboAdmConfigDirTable | 1 | 4 | Configuration directory table. This table contains all available configuration files in flash memory. |
| 1.3.6.1.4.1.272.4.1.17 | biboAdmBoardTable | 1 | 9 | The biboAdmBoardTable lists information about the installed communications modules. This table is updated after every system boot… |
| 1.3.6.1.4.1.272.4.1.18 | biboAdmUsrTrapTable | 1 | 3 | The biboAdmUsrTrapTable lists user-defined objects that are used to create traps. These traps are sent locally, but can also be s… |
| 1.3.6.1.4.1.272.4.1.19 | biboAdmDomainName | 1 | 1 | Domain name. |
| 1.3.6.1.4.1.272.4.1.20 | biboAdmNameServer | 1 | 1 | IP address of name server. |
| 1.3.6.1.4.1.272.4.1.21 | biboAdmNameServ2 | 1 | 1 | IP address of second name server. |
| 1.3.6.1.4.1.272.4.1.22 | biboAdmBridgeEnable | 1 | 1 | Sets bridging to enable / disable status. |
| 1.3.6.1.4.1.272.4.1.23 | biboAdmCapiTcpPort | 1 | 1 | TCP port for remote CAPI demon. |
| 1.3.6.1.4.1.272.4.1.24 | biboAdmTraceTcpPort | 1 | 1 | TCP port for trace demon. |
| 1.3.6.1.4.1.272.4.1.25 | biboAdmRipUdpPort | 1 | 1 | UDP port for RIP. Setting this object to zero disables RIP. |
| 1.3.6.1.4.1.272.4.1.26 | biboAdmSWVersion | 1 | 1 | This is the software release version |
| 1.3.6.1.4.1.272.4.1.27 | biboAdmTimeServer | 1 | 1 | The IP address of the time server. |
| 1.3.6.1.4.1.272.4.1.28 | biboAdmTimeOffset | 1 | 1 | This is the time offset from GMT in seconds. If the set value is in the range from -24 to 24, it means hours, and is automaticall… |
| 1.3.6.1.4.1.272.4.1.29 | biboAdmConsoleSyslog | 1 | 1 | Specifies whether to direct syslog messages to the console. |
| 1.3.6.1.4.1.272.4.1.30 | biboAdmSyslogTableLevel | 1 | 1 | Specifies which message levels to post to the biboAdmSyslogTable and the console, if applicable. |
| 1.3.6.1.4.1.272.4.1.31 | biboAdmSystemId | 1 | 1 | This object contains the system Identification String. |
| 1.3.6.1.4.1.272.4.1.32 | biboAdmLicInfoTable | 1 | 9 | This table contains an entry for each feature, that can be activated by a license. The licenses have to be entered in the biboAdm… |
| 1.3.6.1.4.1.272.4.1.33 | biboAdmBootpRelayServer | 1 | 1 | This object contains the destination IP address to which BOOTP/DHCP request are forwarded by the BIANCA/BRICK BOOTP relay agent. I… |
| 1.3.6.1.4.1.272.4.1.34 | biboAdmRadiusServer | 1 | 1 | This object contains the IP address of the RADIUS server (remote dial in user service). If set to 0.0.0.0 RADIUS services are gen… |
| 1.3.6.1.4.1.272.4.1.35 | biboAdmLocalPPPIdent | 1 | 1 | This is the local ID string used for PPP authentication (PAP/CHAP). In pre4.3 versions the sysName has been used as the local ID … |
| 1.3.6.1.4.1.272.4.1.36 | biboAdmHttpTcpPort | 1 | 1 | TCP port for the HTTP server. Default port is 80, 0 disables the HTTP server. |
| 1.3.6.1.4.1.272.4.1.37 | biboAdmTapiTcpPort | 1 | 1 | TCP port for remote TAPI demon. |
| 1.3.6.1.4.1.272.4.1.38 | biboAdmTimeProtocol | 1 | 1 | This field specifies from which source the bricks internal clock is synchronised: none(1) = no time synchronisation time-udp(… |
| 1.3.6.1.4.1.272.4.1.39 | biboAdmTimeUpdate | 1 | 1 | This is the intervall for timeserver requests (in seconds). If the set value is in the range from -24 to 24, it means hours, and … |
| 1.3.6.1.4.1.272.4.1.40 | biboAdmWINS1 | 1 | 1 | The IP address of the WINS server (NetBIOS Name Server). |
| 1.3.6.1.4.1.272.4.1.41 | biboAdmWINS2 | 1 | 1 | The IP address of the alternate WINS server. |
| 1.3.6.1.4.1.272.4.1.42 | biboAdmCardTable | 1 | 10 | The biboAdmCardTable lists installed cards. |
| 1.3.6.1.4.1.272.4.1.43 | biboAdmTraps | 6 | 6 | None |
| 1.3.6.1.4.1.272.4.1.44 | biboAdmSnmpLinkTrapEvent | 1 | 1 | Defines the ifOperStatus transition(s) of an ifTable object that generates a SNMP linkUp/linkDown trap: none : disable linkUp/lin… |
| 1.3.6.1.4.1.272.4.1.45 | biboAdmExtendedBanner | 1 | 1 | This is an additional banner message which is displayed after the standard welcome message at boot time. This message is typicall… |
| 1.3.6.1.4.1.272.4.1.46 | biboAdmAppTable | 1 | 4 | The biboAdmAppTable lists a source address by application and interface. Creating entries: Entries are created by setting an appli… |