Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-MIB
[Automatically extracted from oidview.com]
admin OBJECT IDENTIFIER ::= { bibo 1 }
admin OBJECT IDENTIFIER ::= { bibo 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.1.4 | biboAdmTrapCommunity | 1 | 1 | Community name for sending traps. |
| 1.3.6.1.4.1.272.4.1.5 | biboAdmSnmpVersion | 1 | 1 | SNMP Version. version1 : SNMP version V1 version1_compat : SNMP version V1 compatibility mode without the appending private… |
| 1.3.6.1.4.1.272.4.1.6 | biboAdmSnmpPort | 1 | 1 | SNMP listen port. |
| 1.3.6.1.4.1.272.4.1.7 | biboAdmSnmpTrapPort | 1 | 1 | SNMP trap port. |
| 1.3.6.1.4.1.272.4.1.8 | biboAdmIpAddr | 1 | 1 | Local IP address. If this object is set, it's value will be used as the source address for all IP packets that are sent. Otherwis… |
| 1.3.6.1.4.1.272.4.1.9 | biboAdmTrapBrdCast | 1 | 1 | Enable/disable trap broadcasting. |
| 1.3.6.1.4.1.272.4.1.10 | biboAdmTrapHostTable | 1 | 3 | The biboAdmTrapHostTable defines where traps are sent (i.e., which hosts). If the table is empty traps are broadcasted. Creating … |
| 1.3.6.1.4.1.272.4.1.11 | biboAdmSyslogMaxEntries | 1 | 1 | Maximum Number of syslog messages stored in memory. |
| 1.3.6.1.4.1.272.4.1.12 | biboAdmSyslogTable | 1 | 5 | The biboAdmSyslogTable keeps track of syslog messages received. The size of the table (number of entries), is limited by the valu… |
| 1.3.6.1.4.1.272.4.1.13 | biboAdmLogHostTable | 1 | 6 | The biboAdmLogHostTable lists hosts which are to receive syslog messages. This table also defines which types and levels of messa… |
| 1.3.6.1.4.1.272.4.1.14 | biboAdmConfigTable | 1 | 9 | The biboAdmConfigTable is used for assigning parameters for managing configuration files. Creating entries: Entries are added to … |
| 1.3.6.1.4.1.272.4.1.15 | biboAdmConfigDirTable | 1 | 4 | Configuration directory table. This table contains all available configuration files in flash memory. |
| 1.3.6.1.4.1.272.4.1.17 | biboAdmBoardTable | 1 | 9 | The biboAdmBoardTable lists information about the installed communications modules. This table is updated after every system boot… |
| 1.3.6.1.4.1.272.4.1.18 | biboAdmUsrTrapTable | 1 | 3 | The biboAdmUsrTrapTable lists user-defined objects that are used to create traps. These traps are sent locally, but can also be s… |
| 1.3.6.1.4.1.272.4.1.19 | biboAdmDomainName | 1 | 1 | Domain name. |
| 1.3.6.1.4.1.272.4.1.20 | biboAdmNameServer | 1 | 1 | IP address of name server. |
| 1.3.6.1.4.1.272.4.1.21 | biboAdmNameServ2 | 1 | 1 | IP address of second name server. |
| 1.3.6.1.4.1.272.4.1.22 | biboAdmBridgeEnable | 1 | 1 | Sets bridging to enable / disable status. |
| 1.3.6.1.4.1.272.4.1.23 | biboAdmCapiTcpPort | 1 | 1 | TCP port for remote CAPI demon. |
| 1.3.6.1.4.1.272.4.1.24 | biboAdmTraceTcpPort | 1 | 1 | TCP port for trace demon. |
| 1.3.6.1.4.1.272.4.1.25 | biboAdmRipUdpPort | 1 | 1 | UDP port for RIP. Setting this object to zero disables RIP. |
| 1.3.6.1.4.1.272.4.1.26 | biboAdmSWVersion | 1 | 1 | This is the software release version |
| 1.3.6.1.4.1.272.4.1.27 | biboAdmTimeServer | 1 | 1 | The IP address of the time server. |
| 1.3.6.1.4.1.272.4.1.28 | biboAdmTimeOffset | 1 | 1 | This is the time offset from GMT in seconds. If the set value is in the range from -24 to 24, it means hours, and is automaticall… |
| 1.3.6.1.4.1.272.4.1.29 | biboAdmConsoleSyslog | 1 | 1 | Specifies whether to direct syslog messages to the console. |
| 1.3.6.1.4.1.272.4.1.30 | biboAdmSyslogTableLevel | 1 | 1 | Specifies which message levels to post to the biboAdmSyslogTable and the console, if applicable. |
| 1.3.6.1.4.1.272.4.1.31 | biboAdmSystemId | 1 | 1 | This object contains the system Identification String. |
| 1.3.6.1.4.1.272.4.1.32 | biboAdmLicInfoTable | 1 | 9 | This table contains an entry for each feature, that can be activated by a license. The licenses have to be entered in the biboAdm… |
| 1.3.6.1.4.1.272.4.1.33 | biboAdmBootpRelayServer | 1 | 1 | This object contains the destination IP address to which BOOTP/DHCP request are forwarded by the BIANCA/BRICK BOOTP relay agent. I… |
| 1.3.6.1.4.1.272.4.1.34 | biboAdmRadiusServer | 1 | 1 | This object contains the IP address of the RADIUS server (remote dial in user service). If set to 0.0.0.0 RADIUS services are gen… |
| 1.3.6.1.4.1.272.4.1.35 | biboAdmLocalPPPIdent | 1 | 1 | This is the local ID string used for PPP authentication (PAP/CHAP). In pre4.3 versions the sysName has been used as the local ID … |
| 1.3.6.1.4.1.272.4.1.36 | biboAdmHttpTcpPort | 1 | 1 | TCP port for the HTTP server. Default port is 80, 0 disables the HTTP server. |
| 1.3.6.1.4.1.272.4.1.37 | biboAdmTapiTcpPort | 1 | 1 | TCP port for remote TAPI demon. |
| 1.3.6.1.4.1.272.4.1.38 | biboAdmTimeProtocol | 1 | 1 | This field specifies from which source the bricks internal clock is synchronised: none(1) = no time synchronisation time-udp(… |
| 1.3.6.1.4.1.272.4.1.39 | biboAdmTimeUpdate | 1 | 1 | This is the intervall for timeserver requests (in seconds). If the set value is in the range from -24 to 24, it means hours, and … |
| 1.3.6.1.4.1.272.4.1.40 | biboAdmWINS1 | 1 | 1 | The IP address of the WINS server (NetBIOS Name Server). |
| 1.3.6.1.4.1.272.4.1.41 | biboAdmWINS2 | 1 | 1 | The IP address of the alternate WINS server. |
| 1.3.6.1.4.1.272.4.1.42 | biboAdmCardTable | 1 | 10 | The biboAdmCardTable lists installed cards. |
| 1.3.6.1.4.1.272.4.1.43 | biboAdmTraps | 6 | 6 | None |
| 1.3.6.1.4.1.272.4.1.44 | biboAdmSnmpLinkTrapEvent | 1 | 1 | Defines the ifOperStatus transition(s) of an ifTable object that generates a SNMP linkUp/linkDown trap: none : disable linkUp/lin… |
| 1.3.6.1.4.1.272.4.1.45 | biboAdmExtendedBanner | 1 | 1 | This is an additional banner message which is displayed after the standard welcome message at boot time. This message is typicall… |
| 1.3.6.1.4.1.272.4.1.46 | biboAdmAppTable | 1 | 4 | The biboAdmAppTable lists a source address by application and interface. Creating entries: Entries are created by setting an appli… |