Count of interface resynchronization. Under rare
circumstances it might be necessary to resynchronize
the physical interface to work properly.
Parsed from file mibx21.mib.txt
Company: bintec
Module: BIANCA-BRICK-X21-MIB
Vendor: Bintec
Module: BIANCA-BRICK-X21-MIB (mibx21.mib)
Type: TABULAR
Access: read-only
Syntax: Counter
Automatically extracted from www.mibdepot.com
x21IfIfReSyncs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of interface resynchronization. Under rare circumstances it might be necessary to resynchronize the physical interface to work properly." ::= { x21IfEntry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.272.4.10.1.1.1 | x21IfIndex | 0 | 0 | Unique index of the X21 interface. |
1.3.6.1.4.1.272.4.10.1.1.2 | x21IfL1State | 0 | 0 | The X21 physical layer state dn(1) physical layer is inactive; up(2) physical layer is active; |
1.3.6.1.4.1.272.4.10.1.1.3 | x21IfL1Mode | 0 | 0 | The physical layer (layer 1) mode. When configured as DCE(2) the X21 interface provides the clock. |
1.3.6.1.4.1.272.4.10.1.1.4 | x21IfIfLeads | 0 | 0 | The value of IfLeads has influence on the state of the physical layer (L1State). When configured as IfLeads=enabled(1), the state… |
1.3.6.1.4.1.272.4.10.1.1.5 | x21IfSpeed | 0 | 0 | The X21 interface speed in bits per second. The range can be configured between 2Mbits and 2400 Bits per second. |
1.3.6.1.4.1.272.4.10.1.1.6 | x21IfL2Mode | 0 | 0 | The layer 2 mode. This value has influence on the HDLC address field (first byte of a HDCL frame). When configured as DTE(1) the … |
1.3.6.1.4.1.272.4.10.1.1.7 | x21IfSpeedReal | 0 | 0 | The measured X21 interface speed in bits per second. |
1.3.6.1.4.1.272.4.10.1.1.8 | x21IfRxPackets | 0 | 0 | Count of received valid Frames. |
1.3.6.1.4.1.272.4.10.1.1.9 | x21IfRxOctets | 0 | 0 | Count of received bytes. |
1.3.6.1.4.1.272.4.10.1.1.10 | x21IfTxPackets | 0 | 0 | x21IftxPackets |
1.3.6.1.4.1.272.4.10.1.1.11 | x21IfTxOctets | 0 | 0 | x21IftxOctets |
1.3.6.1.4.1.272.4.10.1.1.12 | x21IfRxResets | 0 | 0 | Count of receiver resets. Under rare circumstances it might be necessary to reset the receiver to work properly. |
1.3.6.1.4.1.272.4.10.1.1.13 | x21IfRxAborts | 0 | 0 | Count of receiver aborts. The sender of a frame can indicate a frame as aborted with a special Abort sequence. |
1.3.6.1.4.1.272.4.10.1.1.14 | x21IfRxOverruns | 0 | 0 | Count of receiver overruns. If the X21 card is unable to grant sufficiently soon/often the bus, the 32-character RxFIFO may fill … |
1.3.6.1.4.1.272.4.10.1.1.15 | x21IfRxCRCErrors | 0 | 0 | Count of corrupted frames. Errors due to interference on the X21 cable. |
1.3.6.1.4.1.272.4.10.1.1.16 | x21IfRxGiantFrames | 0 | 0 | Count of received frames with illegal framesize. This can occur if a frame delimiter is destroyed. |
1.3.6.1.4.1.272.4.10.1.1.17 | x21IfTxResets | 0 | 0 | x21IftxResets |
1.3.6.1.4.1.272.4.10.1.1.18 | x21IfTxAborts | 0 | 0 | x21IftxAborts |
1.3.6.1.4.1.272.4.10.1.1.19 | x21IfTxUnderruns | 0 | 0 | x21IftxUnderruns |
1.3.6.1.4.1.272.4.10.1.1.20 | x21IfTxGiantFrames | 0 | 0 | x21IftxGiantFrames |
1.3.6.1.4.1.272.4.10.1.1.22 | x21IfBundle | 0 | 0 | Index of the bundle to aggregate multiple Channels to one interface. |