In T1 and E1 mode the primary rate interface may work
with different channel types. Usually every timeslot
is similar to one channel but it is also possible to
bundle multiple timeslots to one channel with a higher
bandwith. This channel bundeling is currently not
supported by the switching equipment for dialup
connections of any network-provider. But usage is
possible with leased lines.
e1-standard(1) 1 D-channel 64 kbit, 30 B-channels 64kbit
bchannels are numbered from 1 to 15 and
from 16 to 31
e1-1tr6(2) 1 D-channel 64 kbit, 30 B-channels 64kbit
identical timeslotassignment as e1-standard
but bchannels are numbered from 1 to 30
e1-H0(3) 1 D-channel 64 kbit, 5 B-channels 384kbit
bchannels are numbered from 1 to 5
e1-H12(4) 1 D-channel 64 kbit, 1 B-channel 1920kbit
e1-burst(5) 1 channel 1984kbit, channel number is 0
e1-raw(6) 1 channel 2048kbit, channel number is 0
e1-leased(7) 31 B-channels 64kbit, numbered from 1 to 31
t1-standard(6) 1 D-channel 64 kbit, 23 B-channels 64kbit
bchannels are numbered from 1 to 23
t1-H0(7) 1 D-channel 64 kbit, 4 B-channels 384kbit
bchannels are numbered from 1 to 4
t1-H11(8) 1 D-channel 64 kbit, 1 B-channel 1472kbit
t1-burst(9) 1 channel 1536kbit, channel number is 0
t1-channelmodes can only be set when pmxIfLayer1Mode is t1
e1-channelmodes can only be set when pmxIfLayer1Mode is e1
Parsed from file mibpmx.mib.txt
Company: None
Module: BIANCA-BRICK-PMX-MIB
In T1 and E1 mode the primary rate interface may work
with different channel types. Usually every timeslot
is similar to one channel but it is also possible to
bundle multiple timeslots to one channel with a higher
bandwith. This channel bundeling is currently not
supported by the switching equipment for dialup
connections of any network-provider. But usage is
possible with leased lines.
e1-standard(1) 1 D-channel 64 kbit, 30 B-channels 64kbit
bchannels are numbered from 1 to 15 and
from 16 to 31
e1-1tr6(2) 1 D-channel 64 kbit, 30 B-channels 64kbit
identical timeslotassignment as e1-standard
but bchannels are numbered from 1 to 30
e1-H0(3) 1 D-channel 64 kbit, 5 B-channels 384kbit
bchannels are numbered from 1 to 5
e1-H12(4) 1 D-channel 64 kbit, 1 B-channel 1920kbit
e1-burst(5) 1 channel 1984kbit, channel number is 0
t1-standard(6) 1 D-channel 64 kbit, 23 B-channels 64kbit
bchannels are numbered from 1 to 23
t1-H0(7) 1 D-channel 64 kbit, 4 B-channels 384kbit
bchannels are numbered from 1 to 4
t1-H11(8) 1 D-channel 64 kbit, 1 B-channel 1472kbit
t1-burst(9) 1 channel 1536kbit, channel number is 0
t1-channelmodes can only be set when pmxIfLayer1Mode is t1
e1-channelmodes can only be set when pmxIfLayer1Mode is e1
Parsed from file BIANCA-BRICK-PMX-MIB.mib
Module: BIANCA-BRICK-PMX-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-PMX-MIB
[Automatically extracted from oidview.com]
pmxIfChannelMode OBJECT-TYPE SYNTAX INTEGER { e1-standard(1), e1-1tr6(2), e1-H0(3), e1-H12(4), e1-burst(5), e1-raw(6), e1-leased(7), t1-standard(10), t1-H0(11), t1-H11(12), t1-burst(13), t1-raw(14), t1-leased(15) } ACCESS read-write STATUS mandatory DESCRIPTION "In T1 and E1 mode the primary rate interface may work with different channel types. Usually every timeslot is similar to one channel but it is also possible to bundle multiple timeslots to one channel with a higher bandwith. This channel bundeling is currently not supported by the switching equipment for dialup connections of any network-provider. But usage is possible with leased lines. e1-standard(1) 1 D-channel 64 kbit, 30 B-channels 64kbit bchannels are numbered from 1 to 15 and from 16 to 31 e1-1tr6(2) 1 D-channel 64 kbit, 30 B-channels 64kbit identical timeslotassignment as e1-standard but bchannels are numbered from 1 to 30 e1-H0(3) 1 D-channel 64 kbit, 5 B-channels 384kbit bchannels are numbered from 1 to 5 e1-H12(4) 1 D-channel 64 kbit, 1 B-channel 1920kbit e1-burst(5) 1 channel 1984kbit, channel number is 0 e1-raw(6) 1 channel 2048kbit, channel number is 0 e1-leased(7) 31 B-channels 64kbit, numbered from 1 to 31 t1-standard(6) 1 D-channel 64 kbit, 23 B-channels 64kbit bchannels are numbered from 1 to 23 t1-H0(7) 1 D-channel 64 kbit, 4 B-channels 384kbit bchannels are numbered from 1 to 4 t1-H11(8) 1 D-channel 64 kbit, 1 B-channel 1472kbit t1-burst(9) 1 channel 1536kbit, channel number is 0 t1-channelmodes can only be set when pmxIfLayer1Mode is t1 e1-channelmodes can only be set when pmxIfLayer1Mode is e1 " ::= { pmxIfEntry 7 }
pmxIfChannelMode OBJECT-TYPE SYNTAX INTEGER { e1-standard(1), e1-1tr6(2), e1-H0(3), e1-H12(4), e1-burst(5), e1-raw(6), t1-standard(10), t1-H0(11), t1-H11(12), t1-burst(13), t1-raw(14) } ACCESS read-write STATUS mandatory DESCRIPTION "In T1 and E1 mode the primary rate interface may work with different channel types. Usually every timeslot is similar to one channel but it is also possible to bundle multiple timeslots to one channel with a higher bandwith. This channel bundeling is currently not supported by the switching equipment for dialup connections of any network-provider. But usage is possible with leased lines. e1-standard(1) 1 D-channel 64 kbit, 30 B-channels 64kbit bchannels are numbered from 1 to 15 and from 16 to 31 e1-1tr6(2) 1 D-channel 64 kbit, 30 B-channels 64kbit identical timeslotassignment as e1-standard but bchannels are numbered from 1 to 30 e1-H0(3) 1 D-channel 64 kbit, 5 B-channels 384kbit bchannels are numbered from 1 to 5 e1-H12(4) 1 D-channel 64 kbit, 1 B-channel 1920kbit e1-burst(5) 1 channel 1984kbit, channel number is 0 t1-standard(6) 1 D-channel 64 kbit, 23 B-channels 64kbit bchannels are numbered from 1 to 23 t1-H0(7) 1 D-channel 64 kbit, 4 B-channels 384kbit bchannels are numbered from 1 to 4 t1-H11(8) 1 D-channel 64 kbit, 1 B-channel 1472kbit t1-burst(9) 1 channel 1536kbit, channel number is 0 t1-channelmodes can only be set when pmxIfLayer1Mode is t1 e1-channelmodes can only be set when pmxIfLayer1Mode is e1 " ::= { pmxIfEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.12.1.1.1 | pmxIfIndex | 0 | 0 | Unique Index of the primary rate interface. The index is similar to slotnumber * 1000 and is also refenced in the ifTable, the is… |
| 1.3.6.1.4.1.272.4.12.1.1.2 | pmxIfSelftest | 0 | 0 | The result of the initial selftest of the PMX module If the result is not succesful, the module is disabled successful(1) All se… |
| 1.3.6.1.4.1.272.4.12.1.1.3 | pmxIfLayer1State | 0 | 0 | The layer 1 state of the primary rate interface active(F1) active, framing and synchronisation is o.k. This is the only state wh… |
| 1.3.6.1.4.1.272.4.12.1.1.4 | pmxIfLayer1Mode | 0 | 0 | In T1 and E1 mode the primary rate interface is working with totaly different clock frequencies, framing and impedance. This depe… |
| 1.3.6.1.4.1.272.4.12.1.1.5 | pmxIfLayer1Framing | 0 | 0 | In T1 and E1 mode the primary rate interface can work with totaly different framing types on layer 1. The framing type must match… |
| 1.3.6.1.4.1.272.4.12.1.1.6 | pmxIfLayer1LineCode | 0 | 0 | In T1 mode the primary rate interface is able to work with different line codes. e1-hdb3(1) High Density Bipolar 3 Level Cod… |
| 1.3.6.1.4.1.272.4.12.1.1.8 | pmxIfLoopbackMode | 0 | 0 | Loopback-Mode is only required for equipment test no-loop(1) do not loopanything, this is the correct mode for normal operation f… |
| 1.3.6.1.4.1.272.4.12.1.1.9 | pmxIfErrors | 0 | 0 | The measured PMX interface errors since startup |
| 1.3.6.1.4.1.272.4.12.1.1.10 | pmxIfPortMode | 0 | 0 | PortMode switches the CM-PRI's 'Out'-port normal(1) 'Out'-port is disabled, this CM-PRI is connected to 'In' go-thru(2) 'Out'-po… |
| 1.3.6.1.4.1.272.4.12.1.1.21 | pmxIfLOS | 0 | 0 | Loss Of Signal conditions since startup |
| 1.3.6.1.4.1.272.4.12.1.1.22 | pmxIfNoFAS | 0 | 0 | Loss Of Frame Alignment conditions since startup |
| 1.3.6.1.4.1.272.4.12.1.1.23 | pmxIfRemoteAlarms | 0 | 0 | Remote Alarms received since startup |
| 1.3.6.1.4.1.272.4.12.1.1.24 | pmxIfAlarmInds | 0 | 0 | Alarms received since startup |
| 1.3.6.1.4.1.272.4.12.1.1.25 | pmxIfCRC4Errors | 0 | 0 | CRC4 errors detected since startup |
| 1.3.6.1.4.1.272.4.12.1.1.26 | pmxIfSlipPositive | 0 | 0 | Positive Slip conditions detected since startup; flags that the frequency of receive clock is less than frequency of internal sys… |
| 1.3.6.1.4.1.272.4.12.1.1.27 | pmxIfSlipNegative | 0 | 0 | Negative Slip conditions detected since startup; flags that the frequency of receive clock is greater than frequency of internal … |