This object specifies the preferred modulation (automode on)
or the modulation (automode disabled) to be used in originating
or answering a connection.
bell103 (1) : 300
bell212 (2) : 1200
v21 (3) : 300
v22 (4) : 1200
v22bis (5) : 2400 or 1200
v23 (6) : 75/1200 or 1200/75
v32 (7) : 9600, 4800
v32bis (8) : 14000, 12000, 9600, 7200, 4800
v34 (9) : 33600, 31200, 28800, 26400, 24000, 21600, 19200,
16800, 14400, 12000, 9600, 7200, 4800, 2400
k56flex (10) : 56000, 54000, 52000, 50000, 48000, 46000,
44000, 42000, 40000, 38000, 36000, 34000, 32000
vfc (11) : 28800, 26400, 24000, 21600, 19200, 16800, 14400,
12000, 9600
v90 (12) : 56000, 54667, 53333, 52000, 50667, 49333, 48000, 46667,
45333, 42667, 41333, 40000, 38667, 37333, 36000, 34667,
33333, 32000, 30667, 29333, 28000
Parsed from file mibmodem.mib.txt
Company: None
Module: BIANCA-BRICK-MIBMODEM-MIB
This object specifies the preferred modulation (automode on)
or the modulation (automode disabled) to be used in originating
or answering a connection.
bell103 (1) : 300
bell212 (2) : 1200
v21 (3) : 300
v22 (4) : 1200
v22bis (5) : 2400 or 1200
v23 (6) : 75/1200 or 1200/75
v32 (7) : 9600, 4800
v32bis (8) : 14000, 12000, 9600, 7200, 4800
v34 (9) : 33600, 31200, 28800, 26400, 24000, 21600, 19200,
16800, 14400, 12000, 9600, 7200, 4800, 2400
k56flex (10) : 56000, 54000, 52000, 50000, 48000, 46000,
44000, 42000, 40000, 38000, 36000, 34000, 32000
vfc (11) : 28800, 26400, 24000, 21600, 19200, 16800, 14400,
12000, 9600
v90 (12) : 56000, 54667, 53333, 52000, 50667, 49333, 48000, 46667,
45333, 42667, 41333, 40000, 38667, 37333, 36000, 34667,
33333, 32000, 30667, 29333, 28000
Parsed from file BIANCA-BRICK-MIBMODEM-MIB.mib
Module: BIANCA-BRICK-MIBMODEM-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-MIBMODEM-MIB
[Automatically extracted from oidview.com]
mdmProfileModulation OBJECT-TYPE SYNTAX INTEGER { bell103(1), bell212(2), v21(3), v22(4), v22bis(5), v23(6), v32(7), v32bis(8), v34(9), k56flex(10), vfc(11), v90(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the preferred modulation (automode on) or the modulation (automode disabled) to be used in originating or answering a connection. bell103 (1) : 300 bell212 (2) : 1200 v21 (3) : 300 v22 (4) : 1200 v22bis (5) : 2400 or 1200 v23 (6) : 75/1200 or 1200/75 v32 (7) : 9600, 4800 v32bis (8) : 14000, 12000, 9600, 7200, 4800 v34 (9) : 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400 k56flex (10) : 56000, 54000, 52000, 50000, 48000, 46000, 44000, 42000, 40000, 38000, 36000, 34000, 32000 vfc (11) : 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600 v90 (12) : 56000, 54667, 53333, 52000, 50667, 49333, 48000, 46667, 45333, 42667, 41333, 40000, 38667, 37333, 36000, 34667, 33333, 32000, 30667, 29333, 28000 " ::= { mdmProfileEntry 3 }
mdmProfileModulation OBJECT-TYPE SYNTAX INTEGER { bell103(1), bell212(2), v21(3), v22(4), v22bis(5), v23(6), v32(7), v32bis(8), v34(9), k56flex(10), vfc(11), v90(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the preferred modulation (automode on) or the modulation (automode disabled) to be used in originating or answering a connection. bell103 (1) : 300 bell212 (2) : 1200 v21 (3) : 300 v22 (4) : 1200 v22bis (5) : 2400 or 1200 v23 (6) : 75/1200 or 1200/75 v32 (7) : 9600, 4800 v32bis (8) : 14000, 12000, 9600, 7200, 4800 v34 (9) : 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400 k56flex (10) : 56000, 54000, 52000, 50000, 48000, 46000, 44000, 42000, 40000, 38000, 36000, 34000, 32000 vfc (11) : 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600 v90 (12) : 56000, 54667, 53333, 52000, 50667, 49333, 48000, 46667, 45333, 42667, 41333, 40000, 38667, 37333, 36000, 34667, 33333, 32000, 30667, 29333, 28000 " ::= { mdmProfileEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.18.1.1.1 | mdmProfileName | 0 | 0 | The name of the profile. Eight profiles are available. |
| 1.3.6.1.4.1.272.4.18.1.1.2 | mdmProfileDescr | 0 | 0 | Profile Description. Info only. |
| 1.3.6.1.4.1.272.4.18.1.1.4 | mdmProfileMinBps | 0 | 0 | This object specified the lowest rate, at which the modem may establish a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.5 | mdmProfileMaxRecvBps | 0 | 0 | This object specifies the highest receive rate, at which the modem may establsh a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.6 | mdmProfileMaxXmitBps | 0 | 0 | This object specifies the highest transmit rate, at which the modem may establsh a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.7 | mdmProfileAutoMode | 0 | 0 | When this object is set to on, the modem will automatically negotiate the best rates beginning with the selected Modulation and M… |
| 1.3.6.1.4.1.272.4.18.1.1.8 | mdmProfileComprV42bis | 0 | 0 | This object specifies, whether V.42bis compression shall be used for modem connections. When set to off, V.42bis compression will… |
| 1.3.6.1.4.1.272.4.18.1.1.9 | mdmProfileComprMNP5 | 0 | 0 | This object specifies, whether MNP Class 5 compression shall be used for modem connections. When set to off, MNP Class 5 compress… |
| 1.3.6.1.4.1.272.4.18.1.1.10 | mdmProfileErrorCorr | 0 | 0 | This object specifies the kind of error correction being used for a connection: none no error correction will be used. required e… |
| 1.3.6.1.4.1.272.4.18.1.1.11 | mdmProfileXmitLevel | 0 | 0 | This object specifies the transmit attenuation in dB. |
| 1.3.6.1.4.1.272.4.18.1.1.12 | mdmProfileCDWaitTime | 0 | 0 | This object specifies the amount of time in milliseconds, the modem will wait for the appearance of the carrier. If the carrier w… |
| 1.3.6.1.4.1.272.4.18.1.1.13 | mdmProfileCDRespTime | 0 | 0 | This object specifies the period of time in milliseconds, a carrier has to be present, before it will be recognized as a carrier. |
| 1.3.6.1.4.1.272.4.18.1.1.14 | mdmProfileCDDiscTime | 0 | 0 | This object specifies the amount of time, the carrier has to drop, before the modem will assume the carrier to be lost. |
| 1.3.6.1.4.1.272.4.18.1.1.15 | mdmProfileRetrain | 0 | 0 | The modem will : off (1) : disable line quality monitor and auto-retrain. retrain (2) : enable line quality monitor and auto-… |
| 1.3.6.1.4.1.272.4.18.1.1.16 | mdmProfileIdleTimerMode | 0 | 0 | The idle timer is used to specify the duration of an interval between successive characters received from the modem which, when … |
| 1.3.6.1.4.1.272.4.18.1.1.17 | mdmProfileIdleTimerFixedDelay | 0 | 0 | This object specifies the duration of the idle timer in milliseconds (see the object mdmProfileIdleTimerMode for further descrip… |
| 1.3.6.1.4.1.272.4.18.1.1.18 | mdmProfileIdleTimerCharDelay | 0 | 0 | This object specifies the number of characters (octets) which is used to calculate the idle timer corresponding to the actually … |