This object specifies the highest receive rate, at which the
modem may establsh a connection.
Parsed from file mibmodem.mib.txt
Company: None
Module: BIANCA-BRICK-MIBMODEM-MIB
This object specifies the highest receive rate, at which the
modem may establsh a connection.
Parsed from file BIANCA-BRICK-MIBMODEM-MIB.mib
Module: BIANCA-BRICK-MIBMODEM-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-MIBMODEM-MIB
[Automatically extracted from oidview.com]
mdmProfileMaxRecvBps OBJECT-TYPE SYNTAX INTEGER { b300(300), b1200(1200), b2400(2400), b4800(4800), b7200(7200), b9600(9600), b12000(12000), b14400(14400), b16800(16800), b19200(19200), b21600(21600), b24000(24000), b26400(26400), b28800(28800), b31200(31200), b33600(33600), b32000(32000), b34000(34000), b36000(36000), b38000(38000), b40000(40000), b42000(42000), b44000(44000), b46000(46000), b48000(48000), b50000(50000), b52000(52000), b54000(54000), b56000(56000) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the highest receive rate, at which the modem may establsh a connection." ::= { mdmProfileEntry 5 }
mdmProfileMaxRecvBps OBJECT-TYPE SYNTAX INTEGER { b300(300), b1200(1200), b2400(2400), b4800(4800), b7200(7200), b9600(9600), b12000(12000), b14400(14400), b16800(16800), b19200(19200), b21600(21600), b24000(24000), b26400(26400), b28800(28800), b31200(31200), b33600(33600), b32000(32000), b34000(34000), b36000(36000), b38000(38000), b40000(40000), b42000(42000), b44000(44000), b46000(46000), b48000(48000), b50000(50000), b52000(52000), b54000(54000), b56000(56000) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the highest receive rate, at which the modem may establsh a connection." ::= { mdmProfileEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.18.1.1.1 | mdmProfileName | 0 | 0 | The name of the profile. Eight profiles are available. |
| 1.3.6.1.4.1.272.4.18.1.1.2 | mdmProfileDescr | 0 | 0 | Profile Description. Info only. |
| 1.3.6.1.4.1.272.4.18.1.1.3 | mdmProfileModulation | 0 | 0 | This object specifies the preferred modulation (automode on) or the modulation (automode disabled) to be used in originating or a… |
| 1.3.6.1.4.1.272.4.18.1.1.4 | mdmProfileMinBps | 0 | 0 | This object specified the lowest rate, at which the modem may establish a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.6 | mdmProfileMaxXmitBps | 0 | 0 | This object specifies the highest transmit rate, at which the modem may establsh a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.7 | mdmProfileAutoMode | 0 | 0 | When this object is set to on, the modem will automatically negotiate the best rates beginning with the selected Modulation and M… |
| 1.3.6.1.4.1.272.4.18.1.1.8 | mdmProfileComprV42bis | 0 | 0 | This object specifies, whether V.42bis compression shall be used for modem connections. When set to off, V.42bis compression will… |
| 1.3.6.1.4.1.272.4.18.1.1.9 | mdmProfileComprMNP5 | 0 | 0 | This object specifies, whether MNP Class 5 compression shall be used for modem connections. When set to off, MNP Class 5 compress… |
| 1.3.6.1.4.1.272.4.18.1.1.10 | mdmProfileErrorCorr | 0 | 0 | This object specifies the kind of error correction being used for a connection: none no error correction will be used. required e… |
| 1.3.6.1.4.1.272.4.18.1.1.11 | mdmProfileXmitLevel | 0 | 0 | This object specifies the transmit attenuation in dB. |
| 1.3.6.1.4.1.272.4.18.1.1.12 | mdmProfileCDWaitTime | 0 | 0 | This object specifies the amount of time in milliseconds, the modem will wait for the appearance of the carrier. If the carrier w… |
| 1.3.6.1.4.1.272.4.18.1.1.13 | mdmProfileCDRespTime | 0 | 0 | This object specifies the period of time in milliseconds, a carrier has to be present, before it will be recognized as a carrier. |
| 1.3.6.1.4.1.272.4.18.1.1.14 | mdmProfileCDDiscTime | 0 | 0 | This object specifies the amount of time, the carrier has to drop, before the modem will assume the carrier to be lost. |
| 1.3.6.1.4.1.272.4.18.1.1.15 | mdmProfileRetrain | 0 | 0 | The modem will : off (1) : disable line quality monitor and auto-retrain. retrain (2) : enable line quality monitor and auto-… |
| 1.3.6.1.4.1.272.4.18.1.1.16 | mdmProfileIdleTimerMode | 0 | 0 | The idle timer is used to specify the duration of an interval between successive characters received from the modem which, when … |
| 1.3.6.1.4.1.272.4.18.1.1.17 | mdmProfileIdleTimerFixedDelay | 0 | 0 | This object specifies the duration of the idle timer in milliseconds (see the object mdmProfileIdleTimerMode for further descrip… |
| 1.3.6.1.4.1.272.4.18.1.1.18 | mdmProfileIdleTimerCharDelay | 0 | 0 | This object specifies the number of characters (octets) which is used to calculate the idle timer corresponding to the actually … |