Start auto configuration on this ISDN Interface. Auto
configuration is a mechanism to automatically detect the
attributes of an ISDN interface. This can be done at boot
time (if isdnIfAutoConfig is set to 'on') or by manually
setting this field to 'start'. Refer to Chapter 3 on Features
and Methods.
Parsed from file mibisdn.mib.txt
Company: None
Module: BIANCA-BOX-ISDN-MIB
Start auto configuration on this ISDN Interface. Auto
configuration is a mechanism to automatically detect the
attributes of an ISDN interface. This can be done at boot
time (if isdnIfAutoConfig is set to 'on') or by manually
setting this field to 'start'. Refer to Chapter 3 on Features
and Methods.
Parsed from file BIANCA-BOX-ISDN-MIB.mib
Module: BIANCA-BOX-ISDN-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BOX-ISDN-MIB
[Automatically extracted from oidview.com]
isdnIfAutoconfigState OBJECT-TYPE SYNTAX INTEGER { start(1), running(2), done(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Start auto configuration on this ISDN Interface. Auto configuration is a mechanism to automatically detect the attributes of an ISDN interface. This can be done at boot time (if isdnIfAutoConfig is set to 'on') or by manually setting this field to 'start'. Refer to Chapter 3 on Features and Methods." ::= { isdnIfEntry 13 }
isdnIfAutoconfigState OBJECT-TYPE SYNTAX INTEGER { start(1), running(2), done(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Start auto configuration on this ISDN Interface. Auto configuration is a mechanism to automatically detect the attributes of an ISDN interface. This can be done at boot time (if isdnIfAutoConfig is set to 'on') or by manually setting this field to 'start'. Refer to Chapter 3 on Features and Methods." ::= { isdnIfEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.2.1.1.1 | isdnIfIndex | 0 | 0 | Unique index of the basic or primary rate interface. |
| 1.3.6.1.4.1.272.4.2.1.1.2 | isdnIfDescription | 0 | 0 | Textual description of the basic rate interface including its slot and number (e.g. bri2-0 means slot 2, unit 0). |
| 1.3.6.1.4.1.272.4.2.1.1.3 | isdnIfLayer1State | 0 | 0 | The ISDN physical layer state according to I.430 f1(1) = inactive; f2(2) = sensing; f3(3) = deactivated; f4(4) = awaiting signa… |
| 1.3.6.1.4.1.272.4.2.1.1.4 | isdnIfBchannelControl | 0 | 0 | B-channels are controlled by a call control protocol in the D-channel. Otherwise they may be used as permanent links. |
| 1.3.6.1.4.1.272.4.2.1.1.5 | isdnIfActivationRequest | 0 | 0 | When this object is set to 'activate' the BRICK will start an activation sequence of ISDN-Layer1 of the basic rate interface. |
| 1.3.6.1.4.1.272.4.2.1.1.6 | isdnIfMode | 0 | 0 | Specifies the mode of the interface. TE or NT Mode will be set for ISDN interfaces without PABX control. For PRI both NT (network… |
| 1.3.6.1.4.1.272.4.2.1.1.7 | isdnIfTimerT3 | 0 | 0 | isdnIftimerT3 |
| 1.3.6.1.4.1.272.4.2.1.1.8 | isdnIfUsePowerDetector | 0 | 0 | Use the PS1 Power Detector to control the layer 1 automaton.This object is only valid for basic rate interfaces. |
| 1.3.6.1.4.1.272.4.2.1.1.9 | isdnIfNumberOfChannels | 0 | 0 | Number of Channels including the D channel, that are available on this ISDN Interface (3 = BRI, 31 = PRI). |
| 1.3.6.1.4.1.272.4.2.1.1.10 | isdnIfTimeouts | 0 | 0 | isdnIftimeouts |
| 1.3.6.1.4.1.272.4.2.1.1.11 | isdnIfActivates | 0 | 0 | Number of successful activation cycles during lifetime of the system. |
| 1.3.6.1.4.1.272.4.2.1.1.12 | isdnIfDeactivates | 0 | 0 | Number of deactivations during lifetime of the system. |
| 1.3.6.1.4.1.272.4.2.1.1.14 | isdnIfAutoconfig | 0 | 0 | Start Autoconfiguration on this ISDN interface at bootup. |
| 1.3.6.1.4.1.272.4.2.1.1.15 | isdnIfLicenseUsage | 0 | 0 | Shows which license type is currently used for this ISDN interface. |
| 1.3.6.1.4.1.272.4.2.1.1.21 | isdnIfSlips | 0 | 0 | Slip conditions detected since startup. Flags that the frequency of receive clock is different than frequency of internal system … |