isdnIftimerT3
View at oid-info.com
Value of Timer T3 in milliseconds.T3 is started whenever
ISDNLayer-1 is activated (i.e. Activation Request is
started).
Parsed from file mibisdn.mib.txt
Company: None
Module: BIANCA-BOX-ISDN-MIB
Value of Timer T3 in milliseconds.T3 is started whenever
ISDNLayer-1 is activated (i.e. Activation Request is
started).
Parsed from file BIANCA-BOX-ISDN-MIB.mib
Module: BIANCA-BOX-ISDN-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BOX-ISDN-MIB
[Automatically extracted from oidview.com]
isdnIfTimerT3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Value of Timer T3 in milliseconds.T3 is started whenever ISDNLayer-1 is activated (i.e. Activation Request is started)." ::= { isdnIfEntry 7 }
isdnIfTimerT3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Value of Timer T3 in milliseconds.T3 is started whenever ISDNLayer-1 is activated (i.e. Activation Request is started)." ::= { isdnIfEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.272.4.2.1.1.1 | isdnIfIndex | 0 | 0 | Unique index of the basic or primary rate interface. |
1.3.6.1.4.1.272.4.2.1.1.2 | isdnIfDescription | 0 | 0 | Textual description of the basic rate interface including its slot and number (e.g. bri2-0 means slot 2, unit 0). |
1.3.6.1.4.1.272.4.2.1.1.3 | isdnIfLayer1State | 0 | 0 | The ISDN physical layer state according to I.430 f1(1) = inactive; f2(2) = sensing; f3(3) = deactivated; f4(4) = awaiting signa… |
1.3.6.1.4.1.272.4.2.1.1.4 | isdnIfBchannelControl | 0 | 0 | B-channels are controlled by a call control protocol in the D-channel. Otherwise they may be used as permanent links. |
1.3.6.1.4.1.272.4.2.1.1.5 | isdnIfActivationRequest | 0 | 0 | When this object is set to 'activate' the BRICK will start an activation sequence of ISDN-Layer1 of the basic rate interface. |
1.3.6.1.4.1.272.4.2.1.1.6 | isdnIfMode | 0 | 0 | Specifies the mode of the interface. TE or NT Mode will be set for ISDN interfaces without PABX control. For PRI both NT (network… |
1.3.6.1.4.1.272.4.2.1.1.8 | isdnIfUsePowerDetector | 0 | 0 | Use the PS1 Power Detector to control the layer 1 automaton.This object is only valid for basic rate interfaces. |
1.3.6.1.4.1.272.4.2.1.1.9 | isdnIfNumberOfChannels | 0 | 0 | Number of Channels including the D channel, that are available on this ISDN Interface (3 = BRI, 31 = PRI). |
1.3.6.1.4.1.272.4.2.1.1.10 | isdnIfTimeouts | 0 | 0 | isdnIftimeouts |
1.3.6.1.4.1.272.4.2.1.1.11 | isdnIfActivates | 0 | 0 | Number of successful activation cycles during lifetime of the system. |
1.3.6.1.4.1.272.4.2.1.1.12 | isdnIfDeactivates | 0 | 0 | Number of deactivations during lifetime of the system. |
1.3.6.1.4.1.272.4.2.1.1.13 | isdnIfAutoconfigState | 0 | 0 | Start auto configuration on this ISDN Interface. Auto configuration is a mechanism to automatically detect the attributes of an I… |
1.3.6.1.4.1.272.4.2.1.1.14 | isdnIfAutoconfig | 0 | 0 | Start Autoconfiguration on this ISDN interface at bootup. |
1.3.6.1.4.1.272.4.2.1.1.15 | isdnIfLicenseUsage | 0 | 0 | Shows which license type is currently used for this ISDN interface. |
1.3.6.1.4.1.272.4.2.1.1.21 | isdnIfSlips | 0 | 0 | Slip conditions detected since startup. Flags that the frequency of receive clock is different than frequency of internal system … |