The pabxUserTable contains information about the pabx users.
CAPI and TAPI users must authenticate to the system by means
of user name and password, before active or passive
connections may be established. The default configuration
defines a user named
user will also be used by old CAPI applications which are
not able to select a user. Please note, that the password
for the user
Entries in this table can be deleted by setting
the object pabxUserTapiMon to the value
Parsed from file mibpabx.mib.txt
Company: None
Module: BIANCA-BOX-PABX-MIB
The pabxUserTable contains information about the pabx users.
CAPI and TAPI users must authenticate to the system by means
of user name and password, before active or passive
connections may be established. The default configuration
defines a user named
user will also be used by old CAPI applications which are
not able to select a user. Please note, that the password
for the user
Entries in this table can be deleted by setting
the object pabxUserTapiMon to the value
Parsed from file BIANCA-BOX-PABX-MIB.mib
Module: BIANCA-BOX-PABX-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BOX-PABX-MIB
[Automatically extracted from oidview.com]
pabxUserTable OBJECT-TYPE SYNTAX SEQUENCE OF PabxUserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The pabxUserTable contains information about the pabx users. CAPI and TAPI users must authenticate to the system by means of user name and password, before active or passive connections may be established. The default configuration defines a user named
with all permissions. This user will also be used by old CAPI applications which are not able to select a user. Please note, that the password for the user must be empty in this case. Entries in this table can be deleted by setting the object pabxUserTapiMon to the value ." ::= { pabx 1 }
pabxUserTable OBJECT-TYPE SYNTAX SEQUENCE OF PabxUserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The pabxUserTable contains information about the pabx users. CAPI and TAPI users must authenticate to the system by means of user name and password, before active or passive connections may be established. The default configuration defines a user named
with all permissions. This user will also be used by old CAPI applications which are not able to select a user. Please note, that the password for the user must be empty in this case. Entries in this table can be deleted by setting the object pabxUserTapiMon to the value ." ::= { pabx 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.20.1.1 | pabxUserEntry | 9 | 9 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.20.2 | pabxTrunkTable | 1 | 15 | This table contains an entry for each trunk-line (or central office line) connecting the system to an outside network. Entries are… |
| 1.3.6.1.4.1.272.4.20.3 | pabxTrunkPrefixTable | 1 | 6 | This table specifies escape codes, that may be used to access the available trunk-lines. Initially, the prefix <0> will be defined t… |
| 1.3.6.1.4.1.272.4.20.4 | pabxExtensionTable | 1 | 18 | This table defines the local numbers (extensions), that shall be used within PABX and assigns an identifier to it. Besides the ex… |
| 1.3.6.1.4.1.272.4.20.5 | pabxExtFeatureTable | 1 | 11 | This table stores all extension related feature settings that would have overloaded the extension table. The extension for which … |
| 1.3.6.1.4.1.272.4.20.8 | pabxGroupTable | 1 | 6 | The group table contains all defined groups. It contains the group id and the associated name and one more field that is currentl… |
| 1.3.6.1.4.1.272.4.20.9 | pabxTerminalTable | 1 | 10 | The terminal table contains all terminals with specification of their corresponding hardware interface, hence invalidating the re… |
| 1.3.6.1.4.1.272.4.20.10 | pabxExtToGroupTable | 1 | 4 | The exttogroup table contains all associations of extensions to groups. To allow for extensions being in arbitrary groups as well… |
| 1.3.6.1.4.1.272.4.20.11 | pabxTrunkMsnTable | 1 | 6 | The pabxTrunkMsnTable contains all MSNs that were detected during auto-configuration process on point-to-multipoint trunk lines. T… |
| 1.3.6.1.4.1.272.4.20.12 | pabxProfileTable | 1 | 6 | The pabxProfileTable. |
| 1.3.6.1.4.1.272.4.20.13 | pabxExtNoPermTable | 1 | 5 | The pabxExtNoPermTable. |
| 1.3.6.1.4.1.272.4.20.14 | systelTerminalTable | 1 | 14 | The systelTerminalTable stores all information about system phones attached to the brick. This covers serial number, software ver… |
| 1.3.6.1.4.1.272.4.20.15 | pabxSpeedDialTable | 1 | 4 | The pabxSpeedDialTable contains shortcuts for dialling arbitrary numbers. and is in fact part of the dial plan like extensions an… |
| 1.3.6.1.4.1.272.4.20.18 | pabxIctTimeout | 1 | 1 | This global setting controls amount of time being waited for the decision whether to invoke Implicit Call Transfer. Two calls tha… |
| 1.3.6.1.4.1.272.4.20.19 | pabxCallWaitingAB | 1 | 1 | This global setting controls whether call waiting is supported on all analog ports. Setting it to value inhibited will prevent de… |
| 1.3.6.1.4.1.272.4.20.20 | pabxLocalPrefix | 1 | 1 | When this object is not empty, internal numbers are dialed by using the contents of this object as a prefix. External numbers are… |
| 1.3.6.1.4.1.272.4.20.21 | pabxTrunkMask | 1 | 1 | This object is a bitmask specifying the set of trunk-lines to be used for external calls, when pabxLocalPrefix is not empty and e… |
| 1.3.6.1.4.1.272.4.20.22 | pabxPriorityVoice | 1 | 1 | Enable of Disable Priority Voice Feature |
| 1.3.6.1.4.1.272.4.20.23 | pabxMusicOnHold | 1 | 1 | Select the source while call in hold state |
| 1.3.6.1.4.1.272.4.20.24 | pabxDoorIntercomCallExtension | 1 | 1 | Specify extension to be called by door intercom. |
| 1.3.6.1.4.1.272.4.20.25 | pabxDoorIntercomExternalOpen | 1 | 1 | Specifies whether opening the door (i.e. calling a door intercom extension) is possible via a trunk call ('allow') or not ('deny'… |
| 1.3.6.1.4.1.272.4.20.26 | pabxTapiAdmPassword | 1 | 1 | Password for TAPI super-user named 'TAPIadmin'. Default is 'bintec'. |
| 1.3.6.1.4.1.272.4.20.27 | pabxDefaultAutoDialOutNo | 1 | 1 | String to be used by default if auto dialout is selected for a user/terminal/extension that has no profile associated with. Defau… |
| 1.3.6.1.4.1.272.4.20.28 | pabxDefaultAvailability | 1 | 1 | Define default availability of extension w/o associated profile. By default extensions are fully available (full), i.e. internal a… |
| 1.3.6.1.4.1.272.4.20.29 | pabxDefaultDialPerm | 1 | 1 | Define dial permissions of extensions w/o associated profile. When set to 'internal' dialling out over (external) trunks is preve… |
| 1.3.6.1.4.1.272.4.20.30 | pabxExternalCallDialPerm | 1 | 1 | Define dial permissions for external calls. When set to 'internal' dialling out over (external) trunks is prevented. Value 'local'… |
| 1.3.6.1.4.1.272.4.20.31 | pabxCapiAdmPassword | 1 | 1 | Password for CAPI super-user named 'CAPIadmin'. Default is an empty password meaning CAPIadmin registration is blocked. |
| 1.3.6.1.4.1.272.4.20.32 | pabxCountry | 1 | 1 | Specifies country where machine resides for country specific settings. |
| 1.3.6.1.4.1.272.4.20.33 | pabxCTExtCalls | 1 | 1 | Specifies whether call transfer of an external bound call to another external bound call is permitted (allow) or not (reject). Def… |