This global setting controls amount of time being waited for
the decision whether to invoke Implicit Call Transfer.
Two calls that are subsequently released by a terminal within
this period of time are thought to be connected as though an
Explicit Call Transfer (ECT) has been invoked by it.
The value is given in milliseconds.
Default value is 500.
Parsed from file mibpabx.mib.txt
Company: bintec
Module: BIANCA-BOX-PABX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
pabxIctTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This global setting controls amount of time being waited for the decision whether to invoke Implicit Call Transfer. Two calls that are subsequently released by a terminal within this period of time are thought to be connected as though an Explicit Call Transfer (ECT) has been invoked by it. The value is given in milliseconds. Default value is 500." ::= { pabx 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.20.18.0 | pabxIctTimeout | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.20.1 | pabxUserTable | 1 | 10 | The pabxUserTable contains information about the pabx users. CAPI and TAPI users must authenticate to the system by means of user… |
| 1.3.6.1.4.1.272.4.20.2 | pabxTrunkTable | 1 | 15 | This table contains an entry for each trunk-line (or central office line) connecting the system to an outside network. Entries are… |
| 1.3.6.1.4.1.272.4.20.3 | pabxTrunkPrefixTable | 1 | 6 | This table specifies escape codes, that may be used to access the available trunk-lines. Initially, the prefix <0> will be defined t… |
| 1.3.6.1.4.1.272.4.20.4 | pabxExtensionTable | 1 | 18 | This table defines the local numbers (extensions), that shall be used within PABX and assigns an identifier to it. Besides the ex… |
| 1.3.6.1.4.1.272.4.20.5 | pabxExtFeatureTable | 1 | 11 | This table stores all extension related feature settings that would have overloaded the extension table. The extension for which … |
| 1.3.6.1.4.1.272.4.20.8 | pabxGroupTable | 1 | 6 | The group table contains all defined groups. It contains the group id and the associated name and one more field that is currentl… |
| 1.3.6.1.4.1.272.4.20.9 | pabxTerminalTable | 1 | 10 | The terminal table contains all terminals with specification of their corresponding hardware interface, hence invalidating the re… |
| 1.3.6.1.4.1.272.4.20.10 | pabxExtToGroupTable | 1 | 4 | The exttogroup table contains all associations of extensions to groups. To allow for extensions being in arbitrary groups as well… |
| 1.3.6.1.4.1.272.4.20.11 | pabxTrunkMsnTable | 1 | 6 | The pabxTrunkMsnTable contains all MSNs that were detected during auto-configuration process on point-to-multipoint trunk lines. T… |
| 1.3.6.1.4.1.272.4.20.12 | pabxProfileTable | 1 | 6 | The pabxProfileTable. |
| 1.3.6.1.4.1.272.4.20.13 | pabxExtNoPermTable | 1 | 5 | The pabxExtNoPermTable. |
| 1.3.6.1.4.1.272.4.20.14 | systelTerminalTable | 1 | 14 | The systelTerminalTable stores all information about system phones attached to the brick. This covers serial number, software ver… |
| 1.3.6.1.4.1.272.4.20.15 | pabxSpeedDialTable | 1 | 4 | The pabxSpeedDialTable contains shortcuts for dialling arbitrary numbers. and is in fact part of the dial plan like extensions an… |
| 1.3.6.1.4.1.272.4.20.19 | pabxCallWaitingAB | 1 | 1 | This global setting controls whether call waiting is supported on all analog ports. Setting it to value inhibited will prevent de… |
| 1.3.6.1.4.1.272.4.20.20 | pabxLocalPrefix | 1 | 1 | When this object is not empty, internal numbers are dialed by using the contents of this object as a prefix. External numbers are… |
| 1.3.6.1.4.1.272.4.20.21 | pabxTrunkMask | 1 | 1 | This object is a bitmask specifying the set of trunk-lines to be used for external calls, when pabxLocalPrefix is not empty and e… |
| 1.3.6.1.4.1.272.4.20.22 | pabxPriorityVoice | 1 | 1 | Enable of Disable Priority Voice Feature |
| 1.3.6.1.4.1.272.4.20.23 | pabxMusicOnHold | 1 | 1 | Select the source while call in hold state |
| 1.3.6.1.4.1.272.4.20.24 | pabxDoorIntercomCallExtension | 1 | 1 | Specify extension to be called by door intercom. |
| 1.3.6.1.4.1.272.4.20.25 | pabxDoorIntercomExternalOpen | 1 | 1 | Specifies whether opening the door (i.e. calling a door intercom extension) is possible via a trunk call ('allow') or not ('deny'… |
| 1.3.6.1.4.1.272.4.20.26 | pabxTapiAdmPassword | 1 | 1 | Password for TAPI super-user named 'TAPIadmin'. Default is 'bintec'. |
| 1.3.6.1.4.1.272.4.20.27 | pabxDefaultAutoDialOutNo | 1 | 1 | String to be used by default if auto dialout is selected for a user/terminal/extension that has no profile associated with. Defau… |
| 1.3.6.1.4.1.272.4.20.28 | pabxDefaultAvailability | 1 | 1 | Define default availability of extension w/o associated profile. By default extensions are fully available (full), i.e. internal a… |
| 1.3.6.1.4.1.272.4.20.29 | pabxDefaultDialPerm | 1 | 1 | Define dial permissions of extensions w/o associated profile. When set to 'internal' dialling out over (external) trunks is preve… |
| 1.3.6.1.4.1.272.4.20.30 | pabxExternalCallDialPerm | 1 | 1 | Define dial permissions for external calls. When set to 'internal' dialling out over (external) trunks is prevented. Value 'local'… |
| 1.3.6.1.4.1.272.4.20.31 | pabxCapiAdmPassword | 1 | 1 | Password for CAPI super-user named 'CAPIadmin'. Default is an empty password meaning CAPIadmin registration is blocked. |
| 1.3.6.1.4.1.272.4.20.32 | pabxCountry | 1 | 1 | Specifies country where machine resides for country specific settings. |
| 1.3.6.1.4.1.272.4.20.33 | pabxCTExtCalls | 1 | 1 | Specifies whether call transfer of an external bound call to another external bound call is permitted (allow) or not (reject). Def… |