The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between
establishment of layer 2 and sending of restart packet.
If layer 2 is established and the time specified by this
object expired, restart packet will be sent.
The value 0 means, restart packet should be sent immediately
after establishment of layer 2.
Parsed from file mibx25.mib.txt
Company: None
Module: BIANCA-BRICK-X25-MIB
The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between
establishment of layer 2 and sending of restart packet.
If layer 2 is established and the time specified by this
object expired, restart packet will be sent.
The value 0 means, restart packet should be sent immediately
after establishment of layer 2.
Parsed from file BIANCA-BRICK-X25-MIB.mib
Module: BIANCA-BRICK-X25-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25-MIB
[Automatically extracted from oidview.com]
x25LkRestDelayTimer OBJECT-TYPE SYNTAX INTEGER (0..30000) ACCESS read-only STATUS mandatory DESCRIPTION "The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 and sending of restart packet. If layer 2 is established and the time specified by this object expired, restart packet will be sent. The value 0 means, restart packet should be sent immediately after establishment of layer 2." ::= { x25LinkEntry 24 }
x25LkRestDelayTimer OBJECT-TYPE SYNTAX INTEGER (0..15000) ACCESS read-only STATUS mandatory DESCRIPTION "The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 and sending of restart packet. If layer 2 is established and the time specified by this object expired, restart packet will be sent. The value 0 means, restart packet should be sent immediately after establishment of layer 2." ::= { x25LinkEntry 24 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.1.1.1 | x25LkIfIndex | 0 | 0 | The index of the interface the link is running on. See ifTable. |
| 1.3.6.1.4.1.272.4.6.1.1.2 | x25LkAddr | 0 | 0 | On point-to-multipoint interfaces, this field contains the (MAC-)address of the partner, the link is leading to. It is empty for … |
| 1.3.6.1.4.1.272.4.6.1.1.3 | x25LkMode | 0 | 0 | This field indicates wheter the Layer 3 on top of the link is operated in DTE or DCE mode. The difference is in the order of VC-a… |
| 1.3.6.1.4.1.272.4.6.1.1.4 | x25LkModulo | 0 | 0 | This field indicates whether the layer 3 on top of the link is in modulo 8 or in modulo 128 mode. |
| 1.3.6.1.4.1.272.4.6.1.1.5 | x25LkLIC | 0 | 0 | Lowest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.1.1.6 | x25LkHIC | 0 | 0 | Highest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.1.1.7 | x25LkLTC | 0 | 0 | Lowest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.1.1.8 | x25LkHTC | 0 | 0 | Highest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.1.1.9 | x25LkLOC | 0 | 0 | Lowest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.1.1.10 | x25LkHOC | 0 | 0 | Highest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.1.1.11 | x25LkDefPktSize | 0 | 0 | The default layer 3 packet size for this link. |
| 1.3.6.1.4.1.272.4.6.1.1.12 | x25LkDefWinSize | 0 | 0 | The default window size. This is always less than 8, if the layer 3 is operated in modulo 8 mode. |
| 1.3.6.1.4.1.272.4.6.1.1.13 | x25LkMaxPktSize | 0 | 0 | The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the pa… |
| 1.3.6.1.4.1.272.4.6.1.1.14 | x25LkMaxWinSize | 0 | 0 | The maximum allowable window size for this link during window size negotiation. |
| 1.3.6.1.4.1.272.4.6.1.1.15 | x25LkL2WinSize | 0 | 0 | The layer 2 window size for this link. |
| 1.3.6.1.4.1.272.4.6.1.1.16 | x25LkL2RetrTimer | 0 | 0 | The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it w… |
| 1.3.6.1.4.1.272.4.6.1.1.17 | x25LkL2RetrCounter | 0 | 0 | The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this obje… |
| 1.3.6.1.4.1.272.4.6.1.1.18 | x25LkL2SupervTimer | 0 | 0 | The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR … |
| 1.3.6.1.4.1.272.4.6.1.1.19 | x25LkL2IdleTimer | 0 | 0 | The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the tim… |
| 1.3.6.1.4.1.272.4.6.1.1.20 | x25LkState | 0 | 0 | This object contains the current state of the link. The link may be manually disconnected by setting this object to the value del… |
| 1.3.6.1.4.1.272.4.6.1.1.21 | x25LkNegotiation | 0 | 0 | This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, out… |
| 1.3.6.1.4.1.272.4.6.1.1.22 | x25LkDiscDelayTimer | 0 | 0 | The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval b… |
| 1.3.6.1.4.1.272.4.6.1.1.23 | x25LkCallDelayTimer | 0 | 0 | The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval be… |
| 1.3.6.1.4.1.272.4.6.1.1.25 | x25LkRewritingRule | 0 | 0 | This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting ru… |
| 1.3.6.1.4.1.272.4.6.1.1.26 | x25LkL1IdleTimer | 0 | 0 | The idle timer in milliseconds for the layer 1 of this link. If layer 2 is disconnected and the time specified by this object exp… |
| 1.3.6.1.4.1.272.4.6.1.1.32 | x25LkActSabmDelayTimer | 0 | 0 | The sabm delay timer in milliseconds for this link (only dialup outgoing link). This timer specifies the time interval between es… |
| 1.3.6.1.4.1.272.4.6.1.1.33 | x25LkPsvSabmDelayTimer | 0 | 0 | The passive sabm delay timer in milliseconds for this link (only dialup incoming link). This timer specifies the time interval be… |