This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according
to this rewriting rule before the call is being routed.
If this value is set to zero, no rewriting will take
place.
Parsed from file mibx25.mib.txt
Company: bintec
Module: BIANCA-BRICK-X25-MIB
Vendor: Bintec
Module: BIANCA-BRICK-X25-MIB (mibx25.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
0..999999 )
Automatically extracted from www.mibdepot.com
x25LkRewritingRule OBJECT-TYPE SYNTAX INTEGER (0..999999) ACCESS read-only STATUS mandatory DESCRIPTION "This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting rule before the call is being routed. If this value is set to zero, no rewriting will take place." ::= { x25LinkEntry 25 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.1.1.1 | x25LkIfIndex | 0 | 0 | The index of the interface the link is running on. See ifTable. |
| 1.3.6.1.4.1.272.4.6.1.1.2 | x25LkAddr | 0 | 0 | On point-to-multipoint interfaces, this field contains the (MAC-)address of the partner, the link is leading to. It is empty for … |
| 1.3.6.1.4.1.272.4.6.1.1.3 | x25LkMode | 0 | 0 | This field indicates wheter the Layer 3 on top of the link is operated in DTE or DCE mode. The difference is in the order of VC-a… |
| 1.3.6.1.4.1.272.4.6.1.1.4 | x25LkModulo | 0 | 0 | This field indicates whether the layer 3 on top of the link is in modulo 8 or in modulo 128 mode. |
| 1.3.6.1.4.1.272.4.6.1.1.5 | x25LkLIC | 0 | 0 | Lowest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.1.1.6 | x25LkHIC | 0 | 0 | Highest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.1.1.7 | x25LkLTC | 0 | 0 | Lowest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.1.1.8 | x25LkHTC | 0 | 0 | Highest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.1.1.9 | x25LkLOC | 0 | 0 | Lowest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.1.1.10 | x25LkHOC | 0 | 0 | Highest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.1.1.11 | x25LkDefPktSize | 0 | 0 | The default layer 3 packet size for this link. |
| 1.3.6.1.4.1.272.4.6.1.1.12 | x25LkDefWinSize | 0 | 0 | The default window size. This is always less than 8, if the layer 3 is operated in modulo 8 mode. |
| 1.3.6.1.4.1.272.4.6.1.1.13 | x25LkMaxPktSize | 0 | 0 | The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the pa… |
| 1.3.6.1.4.1.272.4.6.1.1.14 | x25LkMaxWinSize | 0 | 0 | The maximum allowable window size for this link during window size negotiation. |
| 1.3.6.1.4.1.272.4.6.1.1.15 | x25LkL2WinSize | 0 | 0 | The layer 2 window size for this link. |
| 1.3.6.1.4.1.272.4.6.1.1.16 | x25LkL2RetrTimer | 0 | 0 | The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it w… |
| 1.3.6.1.4.1.272.4.6.1.1.17 | x25LkL2RetrCounter | 0 | 0 | The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this obje… |
| 1.3.6.1.4.1.272.4.6.1.1.18 | x25LkL2SupervTimer | 0 | 0 | The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR … |
| 1.3.6.1.4.1.272.4.6.1.1.19 | x25LkL2IdleTimer | 0 | 0 | The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the tim… |
| 1.3.6.1.4.1.272.4.6.1.1.20 | x25LkState | 0 | 0 | This object contains the current state of the link. The link may be manually disconnected by setting this object to the value del… |
| 1.3.6.1.4.1.272.4.6.1.1.21 | x25LkNegotiation | 0 | 0 | This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, out… |
| 1.3.6.1.4.1.272.4.6.1.1.22 | x25LkDiscDelayTimer | 0 | 0 | The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval b… |
| 1.3.6.1.4.1.272.4.6.1.1.23 | x25LkCallDelayTimer | 0 | 0 | The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval be… |
| 1.3.6.1.4.1.272.4.6.1.1.24 | x25LkRestDelayTimer | 0 | 0 | The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 an… |
| 1.3.6.1.4.1.272.4.6.1.1.26 | x25LkL1IdleTimer | 0 | 0 | The idle timer in milliseconds for the layer 1 of this link. If layer 2 is disconnected and the time specified by this object exp… |
| 1.3.6.1.4.1.272.4.6.1.1.32 | x25LkActSabmDelayTimer | 0 | 0 | The sabm delay timer in milliseconds for this link (only dialup outgoing link). This timer specifies the time interval between es… |
| 1.3.6.1.4.1.272.4.6.1.1.33 | x25LkPsvSabmDelayTimer | 0 | 0 | The passive sabm delay timer in milliseconds for this link (only dialup incoming link). This timer specifies the time interval be… |