Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25-MIB
[Automatically extracted from oidview.com]
x25MprEntry OBJECT-TYPE SYNTAX X25MprEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { x25MprIfIndex } ::= { x25MprTable 1 }
x25MprEntry OBJECT-TYPE SYNTAX X25MprEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { x25MprIfIndex } ::= { x25MprTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.272.4.6.7.1.1 | x25MprIfIndex | 0 | 0 | This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the v… |
1.3.6.1.4.1.272.4.6.7.1.2 | x25MprMtu | 0 | 0 | The Maximum transfer unit to be used with the interface, the row is describing. |
1.3.6.1.4.1.272.4.6.7.1.3 | x25MprEncapsulation | 0 | 0 | This object specifies the encapsulation method to be used. If this object is set to ip_rfc877, the RFC877 compatible encapsulatio… |
1.3.6.1.4.1.272.4.6.7.1.4 | x25MprNumVC | 0 | 0 | This object specifies the number of VCs used with the corresponding interface. The BRICK will always try to have that many VCs av… |
1.3.6.1.4.1.272.4.6.7.1.5 | x25MprMaxVC | 0 | 0 | This object specifies the maximum number of VCs used with the corresponding interface. It shall be greater or equal to x25MprNumV… |
1.3.6.1.4.1.272.4.6.7.1.6 | x25MprWinSize | 0 | 0 | This object describes the window size to be used for outgoing X.25 virtual calls. |
1.3.6.1.4.1.272.4.6.7.1.7 | x25MprPktSize | 0 | 0 | This object describes the packet size, to be used for outgoing X.25 calls. Please note that this parameter is independant of the … |
1.3.6.1.4.1.272.4.6.7.1.8 | x25MprShortHold | 0 | 0 | This object specifies the time of inactivity in seconds, after which the VCs are disconnected automatically. |
1.3.6.1.4.1.272.4.6.7.1.9 | x25MprMaxRetries | 0 | 0 | This object specifies the maximum number of tries for X.25 call establishement. If the BRICK has tried to establish the call for … |
1.3.6.1.4.1.272.4.6.7.1.10 | x25MprBlockTime | 0 | 0 | This object describes the amount of time, the corresponding interface remains in the blocked state after too many tries to establ… |
1.3.6.1.4.1.272.4.6.7.1.11 | x25MprAddr | 0 | 0 | The X.25 address to be used with this interface. A leading @ indicates extended adressing. |
1.3.6.1.4.1.272.4.6.7.1.12 | x25MprMode | 0 | 0 | This object describes the operating mode of the interface. normal multiuser incoming X.25 call. |
1.3.6.1.4.1.272.4.6.7.1.13 | x25MprAutoRoute | 0 | 0 | This object describes, how automatic routes are created. It is especially usefull combined with the multiuser Mode of the interfa… |
1.3.6.1.4.1.272.4.6.7.1.14 | x25MprIpSubnet | 0 | 0 | This object specifies, together with x25MprSubnetMask the possible range for automatically created routes. The object is valid, w… |
1.3.6.1.4.1.272.4.6.7.1.15 | x25MprIpSubnetMask | 0 | 0 | This object specifies, together with x25MprSubnet the possible range for automatically created routes. The object is valid, when … |