This table contains an entry for each partner reachable
via X.25 for Multiprotocol over X.25 according to RFC 1356.
Entries in this table are created manually and will result
to the creation of a multiprotocol routing interface in
the ifTable. This interface can than be used by higher
level protocols like ip, ipx and bridging.
The object x25MprIfIndex shall be set to 0 for creation
of new entries. The BRICK will allocate the next free
interface index and assign it ti x25MprIfIndex.
Rows of this table can be deleted by setting the object
x25MprEncapsulation to the value delete.
Parsed from file mibx25.mib.txt
Company: None
Module: BIANCA-BRICK-X25-MIB
This table contains an entry for each partner reachable
via X.25 for Multiprotocol over X.25 according to RFC 1356.
Entries in this table are created manually and will result
to the creation of a multiprotocol routing interface in
the ifTable. This interface can than be used by higher
level protocols like ip, ipx and bridging.
The object x25MprIfIndex shall be set to 0 for creation
of new entries. The BRICK will allocate the next free
interface index and assign it ti x25MprIfIndex.
Rows of this table can be deleted by setting the object
x25MprEncapsulation to the value delete.
Parsed from file BIANCA-BRICK-X25-MIB.mib
Module: BIANCA-BRICK-X25-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25-MIB
[Automatically extracted from oidview.com]
x25MprTable OBJECT-TYPE SYNTAX SEQUENCE OF X25MprEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an entry for each partner reachable via X.25 for Multiprotocol over X.25 according to RFC 1356. Entries in this table are created manually and will result to the creation of a multiprotocol routing interface in the ifTable. This interface can than be used by higher level protocols like ip, ipx and bridging. The object x25MprIfIndex shall be set to 0 for creation of new entries. The BRICK will allocate the next free interface index and assign it ti x25MprIfIndex. Rows of this table can be deleted by setting the object x25MprEncapsulation to the value delete. " ::= { x25 7 }
x25MprTable OBJECT-TYPE SYNTAX SEQUENCE OF X25MprEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains an entry for each partner reachable via X.25 for Multiprotocol over X.25 according to RFC 1356. Entries in this table are created manually and will result to the creation of a multiprotocol routing interface in the ifTable. This interface can than be used by higher level protocols like ip, ipx and bridging. The object x25MprIfIndex shall be set to 0 for creation of new entries. The BRICK will allocate the next free interface index and assign it ti x25MprIfIndex. Rows of this table can be deleted by setting the object x25MprEncapsulation to the value delete. " ::= { x25 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.7.1 | x25MprEntry | 15 | 15 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.1 | x25LinkTable | 1 | 29 | This table contains an entry for each active link. There may be mutiple active links per interface. For point-to- multipoint inte… |
| 1.3.6.1.4.1.272.4.6.2 | x25LinkPresetTable | 1 | 29 | This table predefines the link-parameters to be used, when a link is created. If no entry is contained in this table for a partic… |
| 1.3.6.1.4.1.272.4.6.3 | x25CallTable | 1 | 22 | This table contains an entry for each active X25-call. Calls always lead from a source-link to a destination-link. An interface i… |
| 1.3.6.1.4.1.272.4.6.4 | x25CallHistoryTable | 1 | 24 | This table provides call information for the last 10 calls after they have been cleared. Active call are not contained in the x25… |
| 1.3.6.1.4.1.272.4.6.5 | x25RouteTable | 1 | 19 | The X.25 Routing Table specifies the target link for different call parameters. For each incoming call the route table will be se… |
| 1.3.6.1.4.1.272.4.6.6 | x25RewriteTable | 1 | 21 | This Table contains entries, that describe different rules of rewriting the call parameters before delivering a call. Which entry… |
| 1.3.6.1.4.1.272.4.6.8 | x25PadProfileTable | 1 | 36 | This Table contains entries for the pad profiles. For PPP connections, pad profiles are assigned to incoming connections via the … |
| 1.3.6.1.4.1.272.4.6.9 | x25ToTcpTable | 1 | 23 | None |
| 1.3.6.1.4.1.272.4.6.10 | x25LocalPadCall | 1 | 1 | This object specifies wether a PAD Call (PID=1) routed to the local X.25 entity (ifIndex=1) should be accepted to allow for a rem… |
| 1.3.6.1.4.1.272.4.6.11 | x25LocalAddr | 1 | 1 | The X.25 address to be used as originating address for outgoing X.25 call from this BRICK. A leading @ indicates extended adressi… |
| 1.3.6.1.4.1.272.4.6.12 | x25Rerouting | 1 | 1 | This object specifies whether a rerouting request should be accepted to establish connection to another server. This is only rele… |
| 1.3.6.1.4.1.272.4.6.13 | x25HistoryMaxEntries | 1 | 1 | Maximum number of x25CallHistory entries in memory. |
| 1.3.6.1.4.1.272.4.6.14 | x25AccountingTemplate | 1 | 1 | Specifies the format of accounting messages sent by the syslog protocol. The format can consist of any order of the following var… |