netSmdsAreaMaskDigits
View at oid-info.com
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.1.10.0 | netSmdsAreaMaskDigits | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.1.1 | netMask | 1 | 1 | The IP subnet mask for the network. The default is 255.255.0.0 (class B) which allows 400 nodes. |
| 1.3.6.1.4.1.277.1.1.2 | netNumber | 1 | 1 | The IP network number for the network. |
| 1.3.6.1.4.1.277.1.1.3 | netDlciAddrSig | 1 | 1 | This variable states the DLCI addressing significance. |
| 1.3.6.1.4.1.277.1.1.4 | netMaxSegsize | 1 | 1 | This variable states the maximum segment size for the network. |
| 1.3.6.1.4.1.277.1.1.8 | netSmdsAreaMaskStart | 1 | 1 | This variable states the starting digit number for defining the start of the Area Mask for SMDS Addresses. |
| 1.3.6.1.4.1.277.1.1.9 | netSmdsAreaMaskDigits | 1 | 1 | This variable states the number of digits used for defining the Area Mask for SMDS Addresses. |
| 1.3.6.1.4.1.277.1.1.11 | netCaCType | 1 | 1 | The CAC (Connection Admission Control) algorithm can be set to any of 3 algorithms: 1. The Cascade default algorithm. 2. The custo… |
| 1.3.6.1.4.1.277.1.1.12 | netCaCCLRobjectiveQoS2 | 1 | 1 | The Cell loss ratio objective for QoSclass2 (VBRrt) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.13 | netCaCCLRobjectiveQoS3 | 1 | 1 | The Cell loss ratio objective for QoSclass3 (VBRnrt) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.14 | netCaCPortScaleFactorDS3 | 1 | 1 | DS3 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack o… |
| 1.3.6.1.4.1.277.1.1.15 | netCaCPortScaleFactorOC3 | 1 | 1 | OC3 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack o… |
| 1.3.6.1.4.1.277.1.1.16 | netCaCScrCustomTable | 1 | 5 | A table of SCR upper limits, corresponding scale factors and maximum supported MBS's used by the Customized CAC. |
| 1.3.6.1.4.1.277.1.1.17 | netResetCaCTable | 1 | 1 | Setting to 1 causes a reset of the customized cac Table in the PRAM . |
| 1.3.6.1.4.1.277.1.1.18 | netSmdsTrafficMode | 1 | 1 | This variable indicates the ga mode for SMDS traffic. |
| 1.3.6.1.4.1.277.1.1.19 | netSmdsTrafficPriority | 1 | 1 | This variable indicates the priority of SMDS traffic. |
| 1.3.6.1.4.1.277.1.1.20 | netSmdsTrafficColor | 1 | 1 | This variable indicates the color for SMDS traffic. |
| 1.3.6.1.4.1.277.1.1.21 | netCaCPortScaleFactorE3 | 1 | 1 | E3 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack of… |
| 1.3.6.1.4.1.277.1.1.22 | netRipStatus | 1 | 1 | The configured state of RIP. The default state is off. |
| 1.3.6.1.4.1.277.1.1.23 | netRipSendHostRoutes | 1 | 1 | The configured state of SendHostRoutes. The default state is off. |
| 1.3.6.1.4.1.277.1.1.24 | netCaCPortScaleFactorOC12 | 1 | 1 | OC12 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack … |
| 1.3.6.1.4.1.277.1.1.25 | netCaCPortScaleFactorT1 | 1 | 1 | T1 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack of… |
| 1.3.6.1.4.1.277.1.1.26 | netSmdsGaAreaMaskStart | 1 | 1 | This variable defines the starting digit number of the SMDS Group Address where the Ga Area Mask begins. |
| 1.3.6.1.4.1.277.1.1.27 | netSmdsGaAreaMaskDigits | 1 | 1 | This variable states the number of digits used in SMDS Group Address Area Mask. |
| 1.3.6.1.4.1.277.1.1.28 | netCaCCDVobjectiveQoS1 | 1 | 1 | The Cell delay variation objective (in microseconds) for QoSclass1 (CBR) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.29 | netCaCCDVobjectiveQoS2 | 1 | 1 | The Cell delay variation objective (in microseconds) for QoSclass2 (VBRrt) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.30 | netCaCCDVCellFractionQoS1 | 1 | 1 | The fraction of QoSClass1 (CBR) cells that can exceed the CDV objective used by the Cascade default CAC. A value of x indicates … |
| 1.3.6.1.4.1.277.1.1.31 | netCaCCDVCellFractionQoS2 | 1 | 1 | The fraction of QoSClass2 (VBRrt) cells that can exceed the CDV objective used by the Cascade default CAC. A value of x indicate… |
| 1.3.6.1.4.1.277.1.1.32 | netOspfLsaRefreshTime | 1 | 1 | netOspfLsaRefreshtime |