netOspfLsaRefreshtime
View at oid-info.com
Time interval at which to refresh QoS metrics
in the Cascade network. Expressed in seconds.
Should be greater than or equal to 300, and less
than 1800, or else will be ignored. Set to 0 by
default.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
netOspfLsaRefreshTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time interval at which to refresh QoS metrics in the Cascade network. Expressed in seconds. Should be greater than or equal to 300, and less than 1800, or else will be ignored. Set to 0 by default." ::= { net 32}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.1.32.0 | netOspfLsaRefreshTime | 0 | 0 | netOspfLsaRefreshtime |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.1.1 | netMask | 1 | 1 | The IP subnet mask for the network. The default is 255.255.0.0 (class B) which allows 400 nodes. |
| 1.3.6.1.4.1.277.1.1.2 | netNumber | 1 | 1 | The IP network number for the network. |
| 1.3.6.1.4.1.277.1.1.3 | netDlciAddrSig | 1 | 1 | This variable states the DLCI addressing significance. |
| 1.3.6.1.4.1.277.1.1.4 | netMaxSegsize | 1 | 1 | This variable states the maximum segment size for the network. |
| 1.3.6.1.4.1.277.1.1.8 | netSmdsAreaMaskStart | 1 | 1 | This variable states the starting digit number for defining the start of the Area Mask for SMDS Addresses. |
| 1.3.6.1.4.1.277.1.1.9 | netSmdsAreaMaskDigits | 1 | 1 | This variable states the number of digits used for defining the Area Mask for SMDS Addresses. |
| 1.3.6.1.4.1.277.1.1.10 | 10 | 1 | 1 | netSmdsAreaMaskDigits |
| 1.3.6.1.4.1.277.1.1.11 | netCaCType | 1 | 1 | The CAC (Connection Admission Control) algorithm can be set to any of 3 algorithms: 1. The Cascade default algorithm. 2. The custo… |
| 1.3.6.1.4.1.277.1.1.12 | netCaCCLRobjectiveQoS2 | 1 | 1 | The Cell loss ratio objective for QoSclass2 (VBRrt) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.13 | netCaCCLRobjectiveQoS3 | 1 | 1 | The Cell loss ratio objective for QoSclass3 (VBRnrt) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.14 | netCaCPortScaleFactorDS3 | 1 | 1 | DS3 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack o… |
| 1.3.6.1.4.1.277.1.1.15 | netCaCPortScaleFactorOC3 | 1 | 1 | OC3 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack o… |
| 1.3.6.1.4.1.277.1.1.16 | netCaCScrCustomTable | 1 | 5 | A table of SCR upper limits, corresponding scale factors and maximum supported MBS's used by the Customized CAC. |
| 1.3.6.1.4.1.277.1.1.17 | netResetCaCTable | 1 | 1 | Setting to 1 causes a reset of the customized cac Table in the PRAM . |
| 1.3.6.1.4.1.277.1.1.18 | netSmdsTrafficMode | 1 | 1 | This variable indicates the ga mode for SMDS traffic. |
| 1.3.6.1.4.1.277.1.1.19 | netSmdsTrafficPriority | 1 | 1 | This variable indicates the priority of SMDS traffic. |
| 1.3.6.1.4.1.277.1.1.20 | netSmdsTrafficColor | 1 | 1 | This variable indicates the color for SMDS traffic. |
| 1.3.6.1.4.1.277.1.1.21 | netCaCPortScaleFactorE3 | 1 | 1 | E3 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack of… |
| 1.3.6.1.4.1.277.1.1.22 | netRipStatus | 1 | 1 | The configured state of RIP. The default state is off. |
| 1.3.6.1.4.1.277.1.1.23 | netRipSendHostRoutes | 1 | 1 | The configured state of SendHostRoutes. The default state is off. |
| 1.3.6.1.4.1.277.1.1.24 | netCaCPortScaleFactorOC12 | 1 | 1 | OC12 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack … |
| 1.3.6.1.4.1.277.1.1.25 | netCaCPortScaleFactorT1 | 1 | 1 | T1 port Scale factor used by the customized CAC. The actual scale factor used is this value divided by 100 to account for lack of… |
| 1.3.6.1.4.1.277.1.1.26 | netSmdsGaAreaMaskStart | 1 | 1 | This variable defines the starting digit number of the SMDS Group Address where the Ga Area Mask begins. |
| 1.3.6.1.4.1.277.1.1.27 | netSmdsGaAreaMaskDigits | 1 | 1 | This variable states the number of digits used in SMDS Group Address Area Mask. |
| 1.3.6.1.4.1.277.1.1.28 | netCaCCDVobjectiveQoS1 | 1 | 1 | The Cell delay variation objective (in microseconds) for QoSclass1 (CBR) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.29 | netCaCCDVobjectiveQoS2 | 1 | 1 | The Cell delay variation objective (in microseconds) for QoSclass2 (VBRrt) used by the Cascade default CAC. |
| 1.3.6.1.4.1.277.1.1.30 | netCaCCDVCellFractionQoS1 | 1 | 1 | The fraction of QoSClass1 (CBR) cells that can exceed the CDV objective used by the Cascade default CAC. A value of x indicates … |
| 1.3.6.1.4.1.277.1.1.31 | netCaCCDVCellFractionQoS2 | 1 | 1 | The fraction of QoSClass2 (VBRrt) cells that can exceed the CDV objective used by the Cascade default CAC. A value of x indicate… |