Defines how often usage data is recorded in non-volatile
store. The value of this object will be different for each
service supported.
For the B-STDX 9000 SMDS system, this object defines how often
the Data Aggregation Process on the CP polls the IOPs for
usage data. The default value is 30 seconds. The range is
unbounded but practical use will dictate a range from 30 seconds
to 1 minute.
For the Cascade 500 ATM billing system, this object defines the
rate at which the switch snapshots the state of all PVCs and
SVCs to stable storage. The default value is 5 minutes;
supported values are in increments of 5 minutes.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
Defines how often the Data Aggregation process on the CP is
to poll the IOPs for usage data. The default value is 30
second. The range is unbounded, but practical use will
dictate a range from 30 seconds to 1 minute.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
nodeBillingCollection OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Defines how often usage data is recorded in non-volatile store. The value of this object will be different for each service supported. For the B-STDX 9000 SMDS system, this object defines how often the Data Aggregation Process on the CP polls the IOPs for usage data. The default value is 30 seconds. The range is unbounded but practical use will dictate a range from 30 seconds to 1 minute. For the Cascade 500 ATM billing system, this object defines the rate at which the switch snapshots the state of all PVCs and SVCs to stable storage. The default value is 5 minutes; supported values are in increments of 5 minutes. " ::= {nodeBillingEntry 6 }
nodeBillingCollection OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Defines how often the Data Aggregation process on the CP is to poll the IOPs for usage data. The default value is 30 second. The range is unbounded, but practical use will dictate a range from 30 seconds to 1 minute." ::= {nodeBillingEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.3.73.1.1 | nodeBillingService | 0 | 0 | The service being reported. This is the index into the table. Additional table rows for Frame Relay and ATM may be provided in t… |
| 1.3.6.1.4.1.277.1.3.73.1.2 | nodeBilling | 0 | 0 | Switch to enable and disable billing on the STDX. When the value of nodeBilling is 'enabled', the value of a logical port's lport… |
| 1.3.6.1.4.1.277.1.3.73.1.3 | nodeBillingAggrPeriod | 0 | 0 | Defines the length of the Billing Aggregation Period in seconds. The default value is 15 minutes. The minimum value is 10 minut… |
| 1.3.6.1.4.1.277.1.3.73.1.4 | nodeBillingCurAggrPeriodStart | 0 | 0 | The start-time of the current aggregation period, given by the number of seconds since 00:00:00 UCT January 1, 1970. |
| 1.3.6.1.4.1.277.1.3.73.1.5 | nodeBillingCurAggrPeriodEnd | 0 | 0 | The end-time of the current aggregation period, given by the number of seconds since 00:00:00 UCT January 1, 1970. |
| 1.3.6.1.4.1.277.1.3.73.1.7 | nodeBillingDailyProcessing | 0 | 0 | Defines whether the Billing System is to perform a set of carrier-specific actions at the time given by nodeBillingDPTime. This… |
| 1.3.6.1.4.1.277.1.3.73.1.8 | nodeBillingDPTime | 0 | 0 | Defines the time (given by the number of seconds since 00:00:00 UCT) that the Billing System is to perform a set of carrier-speci… |
| 1.3.6.1.4.1.277.1.3.73.1.9 | nodeBillingUsageRecOvflWarnings | 0 | 0 | Count of the number of usage record counter-value overflow conditions that have occurred during the current aggregation period. … |
| 1.3.6.1.4.1.277.1.3.73.1.10 | nodeBillingTotalUsageRecOvflWarnings | 0 | 0 | Count of the number of usage record overflow conditions that have occurred during the current day. |
| 1.3.6.1.4.1.277.1.3.73.1.11 | nodeBillingBillableUsageEvents | 0 | 0 | Count of the number of data units (e.g, SMDS L3 PDUs) processed for billing treatment. |
| 1.3.6.1.4.1.277.1.3.73.1.12 | nodeBillingNonBillableUsageEvents | 0 | 0 | Count of the number of data units (e.g, SMDS L3 PDUs) not considered for billing treatment. |
| 1.3.6.1.4.1.277.1.3.73.1.13 | nodeBillingUsageRecCreated | 0 | 0 | Count of the number of usage records created during the current aggregation period. |
| 1.3.6.1.4.1.277.1.3.73.1.14 | nodeBillingTotalUsageRecCreated | 0 | 0 | Count of the total number of usage records created during the current day. |
| 1.3.6.1.4.1.277.1.3.73.1.15 | nodeBillingUsageRecCrFailures | 0 | 0 | Total number of usage records that could not be created during the current aggregation period. This counter is normally incremen… |
| 1.3.6.1.4.1.277.1.3.73.1.16 | nodeBillingTotalUsageRecCrFailures | 0 | 0 | Total number of usage records that could not be created during the current day. |
| 1.3.6.1.4.1.277.1.3.73.1.17 | nodeBillingUsageRecSent | 0 | 0 | Total number of usage records that have been transferred to the Adjunct Billing Processor during the current aggregation period. |
| 1.3.6.1.4.1.277.1.3.73.1.18 | nodeBillingTotalUsageRecSent | 0 | 0 | Total number of usage records that have been transferred to the Adjunct Billing Processor during the current day. |
| 1.3.6.1.4.1.277.1.3.73.1.19 | nodeBillingUsageDataStoreFull | 0 | 0 | The number of times the aggregated usage data store became full during the current aggregation period. |
| 1.3.6.1.4.1.277.1.3.73.1.20 | nodeBillingTotalUsageDataStoreFull | 0 | 0 | Total number of times the aggregated usage data store became full during the current day. |
| 1.3.6.1.4.1.277.1.3.73.1.21 | nodeBillingAdminAction | 0 | 0 | This object defines a set of administrative actions that can be performed by the Billing System. forceUpload - Forces the current… |