The combination of traffic parameters in opposite direction.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The combination of traffic parameters in opposite direction.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cktAtmRTfdType OBJECT-TYPE SYNTAX INTEGER { pcr-0-01 (1), pcr-0-01-tag (2), pcr-01-scr-0-mbs-0 (3), pcr-01-scr-0-mbs-0-tag (4), pcr-01 (5), pcr-01-scr-01-mbs-01 (6), pcr-01-bestEffort(7), pcr-01-mcr (8), unspecified(255) } ACCESS read-write STATUS mandatory DESCRIPTION "The combination of traffic parameters in opposite direction." ::= { cktEntry 103 }
cktAtmRTfdType OBJECT-TYPE SYNTAX INTEGER { pcr-0-01 (1), pcr-0-01-tag (2), pcr-01-scr-0-mbs-0 (3), pcr-01-scr-0-mbs-0-tag (4), pcr-01 (5), pcr-01-scr-01-mbs-01 (6), pcr-01-bestEffort(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The combination of traffic parameters in opposite direction." ::= { cktEntry 103 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.6.1.1.53 | cktOutLostOctets | 0 | 0 | The number of outbound octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.54 | cktOutLostDEOctets | 0 | 0 | The number of outbound DE-marked octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.55 | cktOutLostODEOctets | 0 | 0 | The number of outbound ODE-marked octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.56 | cktRtMinDelay | 0 | 0 | The minimum round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.57 | cktRtMaxDelay | 0 | 0 | The maximum round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.58 | cktRtAvgDelay | 0 | 0 | The average round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.59 | cktDiagTestId | 0 | 0 | Identification for the diagnostics tests to be run. |
| 1.3.6.1.4.1.277.1.6.1.1.60 | cktDiagTestRuns | 0 | 0 | Number of passes of the diagnostics tests to be run. The default value is 1. |
| 1.3.6.1.4.1.277.1.6.1.1.61 | cktHelloCounter | 0 | 0 | Number of PVC hello pdu frames received in the VC entry of the called side. |
| 1.3.6.1.4.1.277.1.6.1.1.62 | cktHelloAckCounter | 0 | 0 | Number of PVC hello Ack pdu frames received in the VC entry of the calling side. |
| 1.3.6.1.4.1.277.1.6.1.1.63 | cktDefinedPath | 0 | 0 | User defined path. in the format of Nx,x,x,Nx,.... If x is not prefixed with 'N', x is an interface ID. If x is prefixed with `N`… |
| 1.3.6.1.4.1.277.1.6.1.1.64 | cktDefinedPathCount | 0 | 0 | User defined path hop count. |
| 1.3.6.1.4.1.277.1.6.1.1.65 | cktDefinedPathEnable | 0 | 0 | If set to 1, it means there is an user defined path for this circuit and it is enabled. |
| 1.3.6.1.4.1.277.1.6.1.1.66 | cktDefinedPathAltOption | 0 | 0 | If set to 1, it means that if the user defined path fails, use the ospf-determined path. |
| 1.3.6.1.4.1.277.1.6.1.1.67 | cktUsingDefinedPath | 0 | 0 | If set to 1, it indicates the PVC is currently using the defined path. |
| 1.3.6.1.4.1.277.1.6.1.1.68 | cktTryAltPath, ckt0CIRCircuit | 0 | 0 | If set to 1, it means the inactive PVC will be activated on the ospf-determined path in the next retry. |
| 1.3.6.1.4.1.277.1.6.1.1.69 | cktNotVirgin | 0 | 0 | If set to 1, it means this VC entry has been successfuly activated before. |
| 1.3.6.1.4.1.277.1.6.1.1.70 | cktInForward | 0 | 0 | If the value is 1, it means the inbound flow is OK. |
| 1.3.6.1.4.1.277.1.6.1.1.71 | cktBtusSeg | 0 | 0 | Number of Bus xmit units per data segment |
| 1.3.6.1.4.1.277.1.6.1.1.72 | cktInSegmentsDiscards | 0 | 0 | Number of segments received that were discarded because of frame reassembly errors. |
| 1.3.6.1.4.1.277.1.6.1.1.73 | cktAtmVPI | 0 | 0 | VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range… |
| 1.3.6.1.4.1.277.1.6.1.1.74 | cktAtmVCI | 0 | 0 | VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range… |
| 1.3.6.1.4.1.277.1.6.1.1.75 | cktType | 0 | 0 | 1 if a permanent virtual circuit; 2 if a switched virtual circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.76 | cktSvcCallingParty | 0 | 0 | The calling party number if this is a switched virtual circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.77 | cktSvcCalledParty | 0 | 0 | The called party number if this is a switched virtual circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.78 | cktSvcDuration | 0 | 0 | The duration since the SVC circuit has been running. |
| 1.3.6.1.4.1.277.1.6.1.1.79 | cktSvcCause | 0 | 0 | SVC cause number. |
| 1.3.6.1.4.1.277.1.6.1.1.80 | cktXlatFlag | 0 | 0 | 0 if RFC1490 or no translation; 1 if RFC1483 translation. |
| 1.3.6.1.4.1.277.1.6.1.1.81 | cktDestLaddr | 0 | 0 | The destination logical address of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.82 | cktSrcLaddr | 0 | 0 | The source logical address of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.83 | cktLoop | 0 | 0 | Setting this variable controls the loopback status of the given circuit endpoint. |
| 1.3.6.1.4.1.277.1.6.1.1.84 | cktRerouteBalance | 0 | 0 | Setting this variable controls the use of rerouting to balance link usage. |
| 1.3.6.1.4.1.277.1.6.1.1.85 | cktCallingBackup | 0 | 0 | Indicates if a caller endpoint is calling a backup PVC. |
| 1.3.6.1.4.1.277.1.6.1.1.86 | cktRCir | 0 | 0 | The average number of user data (bits) that the network agrees to transfer over the circuit in the opposite direction, measured o… |
| 1.3.6.1.4.1.277.1.6.1.1.87 | cktAtmQoS | 0 | 0 | The Quality of Service of the ATM Circuit. Valid only for ATM type circuits. |
| 1.3.6.1.4.1.277.1.6.1.1.88 | cktAtmInCells | 0 | 0 | The Number of ATM cells received on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.89 | cktAtmOutCells | 0 | 0 | The Number of ATM cells transmitted on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.90 | cktAtmInDiscardedClp0Cells | 0 | 0 | The Number of ATM CLP0 cells received and discarded on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.91 | cktAtmInDiscardedClp1Cells | 0 | 0 | The Number of ATM CLP1 cells received and discarded on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.92 | cktAtmVcType | 0 | 0 | Type of ATM connection (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.93 | cktAtmPCR | 0 | 0 | The Peak Cell Rate measured in cells/second at which cells are transmitted for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.94 | cktAtmSCR | 0 | 0 | The Sustainable Cell Rate is the average transmission rate in cells per second for this circuit. It must be less than or or equal… |
| 1.3.6.1.4.1.277.1.6.1.1.95 | cktAtmMBS | 0 | 0 | The Maximum Burst size determines the maximum number of cells that can be transmitted at the peak cell rate. |
| 1.3.6.1.4.1.277.1.6.1.1.96 | cktAtmInPassedClp0Cells | 0 | 0 | The Number of ATM CLP 0 cells received and passed UPC on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.97 | cktAtmInPassedClp1Cells | 0 | 0 | The Number of ATM CLP 1 cells received and passed UPC on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.98 | cktAtmInTaggedCells | 0 | 0 | The Number of ATM cells received and tagged on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.99 | cktAtmOutClp0Cells | 0 | 0 | The Number of ATM CLP 0 cells transmitted on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.100 | cktAtmOutClp1Cells | 0 | 0 | The Number of ATM CLP 1 cells transmitted on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.101 | cktAtmRQoS | 0 | 0 | The Quality of Service of the ATM connection in the opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.102 | cktAtmTfdType | 0 | 0 | The combination of traffic parameters. |
| 1.3.6.1.4.1.277.1.6.1.1.104 | cktAtmTfdParam1 | 0 | 0 | The traffic descriptor parameter 1. |
| 1.3.6.1.4.1.277.1.6.1.1.105 | cktAtmTfdParam2 | 0 | 0 | The traffic descriptor parameter 2. |
| 1.3.6.1.4.1.277.1.6.1.1.106 | cktAtmTfdParam3 | 0 | 0 | The traffic descriptor parameter 3. |
| 1.3.6.1.4.1.277.1.6.1.1.107 | cktAtmRTfdParam1 | 0 | 0 | The traffic descriptor parameter 1 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.108 | cktAtmRTfdParam2 | 0 | 0 | The traffic descriptor parameter 2 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.109 | cktAtmRTfdParam3 | 0 | 0 | The traffic descriptor parameter 3 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.110 | cktAtmFrameIWF | 0 | 0 | Frame Relay/ATM Interworking Function indicator. |
| 1.3.6.1.4.1.277.1.6.1.1.111 | cktAtmUserPlane | 0 | 0 | Type of connectivity for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.112 | cktRBc | 0 | 0 | The maximum amount of data (bits) that the network agrees to transfer over the circuit in the opposite direction under normal con… |
| 1.3.6.1.4.1.277.1.6.1.1.113 | cktRBe | 0 | 0 | The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit in the opposite directi… |
| 1.3.6.1.4.1.277.1.6.1.1.114 | cktOamLoopbackDirection | 0 | 0 | Which direction to send the loopback cell. If 'local', send out this circuit entry's port. If 'remote', send out the remote ci… |
| 1.3.6.1.4.1.277.1.6.1.1.115 | cktOamLoopbackType | 0 | 0 | Type of oam loopback to send - either segment or end to end. |
| 1.3.6.1.4.1.277.1.6.1.1.116 | cktOamLoopbackHops | 0 | 0 | Number of hops the loopback cell should traverse inside the Cascade network before being echoed back by the far Cascade device. |
| 1.3.6.1.4.1.277.1.6.1.1.117 | cktOamLoopbackCount | 0 | 0 | Number of oam loopback cells left to send this session. Setting this from zero to non-zero starts the loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.118 | cktOamLoopbackReceived | 0 | 0 | Number of oam responses received for this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.119 | cktOamLoopbackTimeouts | 0 | 0 | Number of times a loopback response was not received within the timeout period during this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.120 | cktOamLoopbackReceivedHigh | 0 | 0 | Highest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.121 | cktOamLoopbackReceivedLow | 0 | 0 | Lowest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.122 | cktOamLoopbackReceivedAvg | 0 | 0 | Average response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.123 | cktOamAlarmDisable | 0 | 0 | If disabled, then don't generate oam alarms if this circuit is down. |
| 1.3.6.1.4.1.277.1.6.1.1.124 | cktShaperId | 0 | 0 | The shaper to be used for this virtual connection interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card Values: 1..16 |
| 1.3.6.1.4.1.277.1.6.1.1.125 | cktOspfCtd, cktReqCDV | 0 | 0 | The allowed cell delay: 4-port CBR E1/DS1 card The maximum allowed cell delay in msec |
| 1.3.6.1.4.1.277.1.6.1.1.126 | cktOspfCdv, cktReqRCDV | 0 | 0 | The requested reverse cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.127 | cktOutPort | 0 | 0 | The outgoing port number for the adjacent VC entry in this switch. |
| 1.3.6.1.4.1.277.1.6.1.1.128 | cktOutVc | 0 | 0 | The adjacent VC entry corresponding to this circuit across the bus. |
| 1.3.6.1.4.1.277.1.6.1.1.129 | cktRVc | 0 | 0 | The adjacent VC entry corresponding to this circuit across the trunk. |
| 1.3.6.1.4.1.277.1.6.1.1.130 | cktEntryType | 0 | 0 | The internal type of circuit entry allocated by the circuit manager. |
| 1.3.6.1.4.1.277.1.6.1.1.131 | cktDiagStr | 0 | 0 | Internal diagnostic information. |
| 1.3.6.1.4.1.277.1.6.1.1.132 | cktSvcAalType | 0 | 0 | The AAL type for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.133 | cktSvcBBearerClass | 0 | 0 | The Broadband bearer capability class for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.134 | cktSvcBBearerClippingSusc | 0 | 0 | The Broadband bearer capability clipping susceptibility for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.135 | cktSvcBBearerTmgReq | 0 | 0 | The Broadband bearer capability timing requirements for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.136 | cktSvcBBearerTfcType | 0 | 0 | The Broadband bearer capability traffic type for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.137 | cktAtmUPCEnable | 0 | 0 | Enable ATM UPC Function. |
| 1.3.6.1.4.1.277.1.6.1.1.138 | cktRPriority | 0 | 0 | The priority level (0 through 3) for this circuit in the opposite direction. When port service type is defined as 'mono-class', … |
| 1.3.6.1.4.1.277.1.6.1.1.139 | cktRtPriority | 0 | 0 | The routing priority level of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.140 | cktDeltaBc | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as committed bits during the measurement interval … |
| 1.3.6.1.4.1.277.1.6.1.1.141 | cktDeltaBe | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits during the measurement inte… |
| 1.3.6.1.4.1.277.1.6.1.1.142 | cktDeltaRBc | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as committed bits in the opposite direction during… |
| 1.3.6.1.4.1.277.1.6.1.1.143 | cktDeltaRBe | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits in the opposite direction d… |
| 1.3.6.1.4.1.277.1.6.1.1.144 | cktRedFrPcnt | 0 | 0 | The percentage of RED frame bits that are allowed to enter the network, during the measurement interval, under non-congestion con… |
| 1.3.6.1.4.1.277.1.6.1.1.145 | cktRedFrRPcnt | 0 | 0 | The percentage of RED frame bits that are allowed to enter the network in the opposite direction, during the measurement interval… |
| 1.3.6.1.4.1.277.1.6.1.1.146 | cktRateEnforceSchm | 0 | 0 | Variable used to indicate the rate enforcement scheme employed. 0: Slide window rate enforcement scheme 1: Jump window rate enfor… |
| 1.3.6.1.4.1.277.1.6.1.1.147 | cktRateEnforceRSchm | 0 | 0 | Variable used to indicate the rate enforcement scheme employed in the opposite direction. 0: Slide window rate enforcement scheme… |
| 1.3.6.1.4.1.277.1.6.1.1.148 | cktROde | 0 | 0 | This variable states whether graceful discard is enabled for the ckt in the opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.149 | cktPrivateNet | 0 | 0 | If non-zero, indicates the private network that the circuit belongs to. If 0, the circuit has access to the entire public portion… |
| 1.3.6.1.4.1.277.1.6.1.1.150 | cktPrivateNetOverflow | 0 | 0 | Indicates how private network circuits are handled, when the resources of the network have become exhausted. If set to use-public… |
| 1.3.6.1.4.1.277.1.6.1.1.151 | cktCustomerID | 0 | 0 | The Customer that owns this circuit. For Virtual Private Networking Support. |
| 1.3.6.1.4.1.277.1.6.1.1.152 | cktAtmCDVT | 0 | 0 | The Cell Delay Variation Tolerance for the VC |
| 1.3.6.1.4.1.277.1.6.1.1.153 | cktNdcEnable | 0 | 0 | Enable/disable Network Data Collection for a PVC on an IOM. The number of NDC-monitored PVCs is limited as follows: 30 per DS3 in… |
| ... | ||||