1 if a permanent virtual circuit; 2 if a switched virtual circuit.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
1 if a permanent virtual circuit; 2 if a switched virtual circuit.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cktType OBJECT-TYPE SYNTAX INTEGER { pvc (1), svc (2) } ACCESS read-only STATUS mandatory DESCRIPTION "1 if a permanent virtual circuit; 2 if a switched virtual circuit." ::= { cktEntry 75 }
cktType OBJECT-TYPE SYNTAX INTEGER { pvc (1), svc (2) } ACCESS read-only STATUS mandatory DESCRIPTION "1 if a permanent virtual circuit; 2 if a switched virtual circuit." ::= { cktEntry 75 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.6.1.1.25 | cktHopCnt | 0 | 0 | The count of hops along the circuit path. (Max is 16) |
| 1.3.6.1.4.1.277.1.6.1.1.26 | cktPath | 0 | 0 | The circuit path consisting a sequence of outbound interface indexes at nodes along the established circuit. The format is interf… |
| 1.3.6.1.4.1.277.1.6.1.1.27 | cktFailReason | 0 | 0 | The reason for the PVC establishment failure. |
| 1.3.6.1.4.1.277.1.6.1.1.28 | cktFailNode | 0 | 0 | The node which causes the PVC failure. |
| 1.3.6.1.4.1.277.1.6.1.1.29 | cktFailPort | 0 | 0 | The port on the fail node which causes the PVC failure. |
| 1.3.6.1.4.1.277.1.6.1.1.30 | cktMcastGroupId | 0 | 0 | Multicast group identifier (1..32). This field is 0 for unicast PVCs. |
| 1.3.6.1.4.1.277.1.6.1.1.31 | cktMcastMemberList | 0 | 0 | A list of operations and the affected unicast DLCIs (lportId, cktId)s in a multicast group. The syntax is as follows: [op:dlci,d… |
| 1.3.6.1.4.1.277.1.6.1.1.32 | cktMcastParentGroups | 0 | 0 | An 8-byte Octect string indicating the parent groups this DLCI belongs to. |
| 1.3.6.1.4.1.277.1.6.1.1.33 | cktInFrames | 0 | 0 | The number of inbound frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.34 | cktInDEFrames | 0 | 0 | The number of inbound DE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.35 | cktInODEFrames | 0 | 0 | The number of inbound ODE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.36 | cktInFECNFrames | 0 | 0 | The number of inbound frames indicating forward congestion since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.37 | cktInBECNFrames | 0 | 0 | The number of inbound frames indicating backward congestion since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.38 | cktInDiscards | 0 | 0 | Number of inbound frames discarded by rate enforcement. |
| 1.3.6.1.4.1.277.1.6.1.1.39 | cktInOctets | 0 | 0 | The number of inbound octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.40 | cktInDEOctets | 0 | 0 | The number of inbound DE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.41 | cktInODEOctets | 0 | 0 | The number of inbound ODE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.42 | cktOutFrames | 0 | 0 | The number of outbound frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.43 | cktOutDEFrames | 0 | 0 | The number of outbound DE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.44 | cktOutODEFrames | 0 | 0 | The number of outbound ODE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.45 | cktOutFECNFrames | 0 | 0 | The number of outbound FECN-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.46 | cktOutBECNFrames | 0 | 0 | The number of outbound BECN-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.47 | cktOutOctets | 0 | 0 | The number of outbound octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.48 | cktOutDEOctets | 0 | 0 | The number of outbound DE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.49 | cktOutODEOctets | 0 | 0 | The number of outbound ODE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.50 | cktOutLostFrames | 0 | 0 | The number of outbound frames that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.51 | cktOutLostDEFrames | 0 | 0 | The number of outbound DE-marked frames that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.52 | cktOutLostODEFrames | 0 | 0 | The number of outbound ODE-marked frames that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.53 | cktOutLostOctets | 0 | 0 | The number of outbound octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.54 | cktOutLostDEOctets | 0 | 0 | The number of outbound DE-marked octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.55 | cktOutLostODEOctets | 0 | 0 | The number of outbound ODE-marked octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.56 | cktRtMinDelay | 0 | 0 | The minimum round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.57 | cktRtMaxDelay | 0 | 0 | The maximum round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.58 | cktRtAvgDelay | 0 | 0 | The average round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.59 | cktDiagTestId | 0 | 0 | Identification for the diagnostics tests to be run. |
| 1.3.6.1.4.1.277.1.6.1.1.60 | cktDiagTestRuns | 0 | 0 | Number of passes of the diagnostics tests to be run. The default value is 1. |
| 1.3.6.1.4.1.277.1.6.1.1.61 | cktHelloCounter | 0 | 0 | Number of PVC hello pdu frames received in the VC entry of the called side. |
| 1.3.6.1.4.1.277.1.6.1.1.62 | cktHelloAckCounter | 0 | 0 | Number of PVC hello Ack pdu frames received in the VC entry of the calling side. |
| 1.3.6.1.4.1.277.1.6.1.1.63 | cktDefinedPath | 0 | 0 | User defined path. in the format of Nx,x,x,Nx,.... If x is not prefixed with 'N', x is an interface ID. If x is prefixed with `N`… |
| 1.3.6.1.4.1.277.1.6.1.1.64 | cktDefinedPathCount | 0 | 0 | User defined path hop count. |
| 1.3.6.1.4.1.277.1.6.1.1.65 | cktDefinedPathEnable | 0 | 0 | If set to 1, it means there is an user defined path for this circuit and it is enabled. |
| 1.3.6.1.4.1.277.1.6.1.1.66 | cktDefinedPathAltOption | 0 | 0 | If set to 1, it means that if the user defined path fails, use the ospf-determined path. |
| 1.3.6.1.4.1.277.1.6.1.1.67 | cktUsingDefinedPath | 0 | 0 | If set to 1, it indicates the PVC is currently using the defined path. |
| 1.3.6.1.4.1.277.1.6.1.1.68 | cktTryAltPath, ckt0CIRCircuit | 0 | 0 | If set to 1, it means the inactive PVC will be activated on the ospf-determined path in the next retry. |
| 1.3.6.1.4.1.277.1.6.1.1.69 | cktNotVirgin | 0 | 0 | If set to 1, it means this VC entry has been successfuly activated before. |
| 1.3.6.1.4.1.277.1.6.1.1.70 | cktInForward | 0 | 0 | If the value is 1, it means the inbound flow is OK. |
| 1.3.6.1.4.1.277.1.6.1.1.71 | cktBtusSeg | 0 | 0 | Number of Bus xmit units per data segment |
| 1.3.6.1.4.1.277.1.6.1.1.72 | cktInSegmentsDiscards | 0 | 0 | Number of segments received that were discarded because of frame reassembly errors. |
| 1.3.6.1.4.1.277.1.6.1.1.73 | cktAtmVPI | 0 | 0 | VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range… |
| 1.3.6.1.4.1.277.1.6.1.1.74 | cktAtmVCI | 0 | 0 | VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range… |
| 1.3.6.1.4.1.277.1.6.1.1.76 | cktSvcCallingParty | 0 | 0 | The calling party number if this is a switched virtual circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.77 | cktSvcCalledParty | 0 | 0 | The called party number if this is a switched virtual circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.78 | cktSvcDuration | 0 | 0 | The duration since the SVC circuit has been running. |
| 1.3.6.1.4.1.277.1.6.1.1.79 | cktSvcCause | 0 | 0 | SVC cause number. |
| 1.3.6.1.4.1.277.1.6.1.1.80 | cktXlatFlag | 0 | 0 | 0 if RFC1490 or no translation; 1 if RFC1483 translation. |
| 1.3.6.1.4.1.277.1.6.1.1.81 | cktDestLaddr | 0 | 0 | The destination logical address of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.82 | cktSrcLaddr | 0 | 0 | The source logical address of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.83 | cktLoop | 0 | 0 | Setting this variable controls the loopback status of the given circuit endpoint. |
| 1.3.6.1.4.1.277.1.6.1.1.84 | cktRerouteBalance | 0 | 0 | Setting this variable controls the use of rerouting to balance link usage. |
| 1.3.6.1.4.1.277.1.6.1.1.85 | cktCallingBackup | 0 | 0 | Indicates if a caller endpoint is calling a backup PVC. |
| 1.3.6.1.4.1.277.1.6.1.1.86 | cktRCir | 0 | 0 | The average number of user data (bits) that the network agrees to transfer over the circuit in the opposite direction, measured o… |
| 1.3.6.1.4.1.277.1.6.1.1.87 | cktAtmQoS | 0 | 0 | The Quality of Service of the ATM Circuit. Valid only for ATM type circuits. |
| 1.3.6.1.4.1.277.1.6.1.1.88 | cktAtmInCells | 0 | 0 | The Number of ATM cells received on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.89 | cktAtmOutCells | 0 | 0 | The Number of ATM cells transmitted on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.90 | cktAtmInDiscardedClp0Cells | 0 | 0 | The Number of ATM CLP0 cells received and discarded on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.91 | cktAtmInDiscardedClp1Cells | 0 | 0 | The Number of ATM CLP1 cells received and discarded on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.92 | cktAtmVcType | 0 | 0 | Type of ATM connection (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.93 | cktAtmPCR | 0 | 0 | The Peak Cell Rate measured in cells/second at which cells are transmitted for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.94 | cktAtmSCR | 0 | 0 | The Sustainable Cell Rate is the average transmission rate in cells per second for this circuit. It must be less than or or equal… |
| 1.3.6.1.4.1.277.1.6.1.1.95 | cktAtmMBS | 0 | 0 | The Maximum Burst size determines the maximum number of cells that can be transmitted at the peak cell rate. |
| 1.3.6.1.4.1.277.1.6.1.1.96 | cktAtmInPassedClp0Cells | 0 | 0 | The Number of ATM CLP 0 cells received and passed UPC on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.97 | cktAtmInPassedClp1Cells | 0 | 0 | The Number of ATM CLP 1 cells received and passed UPC on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.98 | cktAtmInTaggedCells | 0 | 0 | The Number of ATM cells received and tagged on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.99 | cktAtmOutClp0Cells | 0 | 0 | The Number of ATM CLP 0 cells transmitted on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.100 | cktAtmOutClp1Cells | 0 | 0 | The Number of ATM CLP 1 cells transmitted on a VC (VPC or VCC).. |
| 1.3.6.1.4.1.277.1.6.1.1.101 | cktAtmRQoS | 0 | 0 | The Quality of Service of the ATM connection in the opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.102 | cktAtmTfdType | 0 | 0 | The combination of traffic parameters. |
| 1.3.6.1.4.1.277.1.6.1.1.103 | cktAtmRTfdType | 0 | 0 | The combination of traffic parameters in opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.104 | cktAtmTfdParam1 | 0 | 0 | The traffic descriptor parameter 1. |
| 1.3.6.1.4.1.277.1.6.1.1.105 | cktAtmTfdParam2 | 0 | 0 | The traffic descriptor parameter 2. |
| 1.3.6.1.4.1.277.1.6.1.1.106 | cktAtmTfdParam3 | 0 | 0 | The traffic descriptor parameter 3. |
| 1.3.6.1.4.1.277.1.6.1.1.107 | cktAtmRTfdParam1 | 0 | 0 | The traffic descriptor parameter 1 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.108 | cktAtmRTfdParam2 | 0 | 0 | The traffic descriptor parameter 2 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.109 | cktAtmRTfdParam3 | 0 | 0 | The traffic descriptor parameter 3 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.110 | cktAtmFrameIWF | 0 | 0 | Frame Relay/ATM Interworking Function indicator. |
| 1.3.6.1.4.1.277.1.6.1.1.111 | cktAtmUserPlane | 0 | 0 | Type of connectivity for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.112 | cktRBc | 0 | 0 | The maximum amount of data (bits) that the network agrees to transfer over the circuit in the opposite direction under normal con… |
| 1.3.6.1.4.1.277.1.6.1.1.113 | cktRBe | 0 | 0 | The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit in the opposite directi… |
| 1.3.6.1.4.1.277.1.6.1.1.114 | cktOamLoopbackDirection | 0 | 0 | Which direction to send the loopback cell. If 'local', send out this circuit entry's port. If 'remote', send out the remote ci… |
| 1.3.6.1.4.1.277.1.6.1.1.115 | cktOamLoopbackType | 0 | 0 | Type of oam loopback to send - either segment or end to end. |
| 1.3.6.1.4.1.277.1.6.1.1.116 | cktOamLoopbackHops | 0 | 0 | Number of hops the loopback cell should traverse inside the Cascade network before being echoed back by the far Cascade device. |
| 1.3.6.1.4.1.277.1.6.1.1.117 | cktOamLoopbackCount | 0 | 0 | Number of oam loopback cells left to send this session. Setting this from zero to non-zero starts the loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.118 | cktOamLoopbackReceived | 0 | 0 | Number of oam responses received for this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.119 | cktOamLoopbackTimeouts | 0 | 0 | Number of times a loopback response was not received within the timeout period during this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.120 | cktOamLoopbackReceivedHigh | 0 | 0 | Highest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.121 | cktOamLoopbackReceivedLow | 0 | 0 | Lowest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.122 | cktOamLoopbackReceivedAvg | 0 | 0 | Average response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.123 | cktOamAlarmDisable | 0 | 0 | If disabled, then don't generate oam alarms if this circuit is down. |
| 1.3.6.1.4.1.277.1.6.1.1.124 | cktShaperId | 0 | 0 | The shaper to be used for this virtual connection interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card Values: 1..16 |
| 1.3.6.1.4.1.277.1.6.1.1.125 | cktOspfCtd, cktReqCDV | 0 | 0 | The allowed cell delay: 4-port CBR E1/DS1 card The maximum allowed cell delay in msec |
| ... | ||||