The number of the CLP1 cells received and discarded by the
NRTS processor.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The number of the CLP1 cells received and discarded by the
NRTS processor.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cktNrtsDiscardClp1 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of the CLP1 cells received and discarded by the NRTS processor." ::= { cktEntry 158 }
cktNrtsDiscardClp1 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of the CLP1 cells received and discarded by the NRTS processor." ::= { cktEntry 158 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.6.1.1.108 | cktAtmRTfdParam2 | 0 | 0 | The traffic descriptor parameter 2 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.109 | cktAtmRTfdParam3 | 0 | 0 | The traffic descriptor parameter 3 for opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.110 | cktAtmFrameIWF | 0 | 0 | Frame Relay/ATM Interworking Function indicator. |
| 1.3.6.1.4.1.277.1.6.1.1.111 | cktAtmUserPlane | 0 | 0 | Type of connectivity for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.112 | cktRBc | 0 | 0 | The maximum amount of data (bits) that the network agrees to transfer over the circuit in the opposite direction under normal con… |
| 1.3.6.1.4.1.277.1.6.1.1.113 | cktRBe | 0 | 0 | The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit in the opposite directi… |
| 1.3.6.1.4.1.277.1.6.1.1.114 | cktOamLoopbackDirection | 0 | 0 | Which direction to send the loopback cell. If 'local', send out this circuit entry's port. If 'remote', send out the remote ci… |
| 1.3.6.1.4.1.277.1.6.1.1.115 | cktOamLoopbackType | 0 | 0 | Type of oam loopback to send - either segment or end to end. |
| 1.3.6.1.4.1.277.1.6.1.1.116 | cktOamLoopbackHops | 0 | 0 | Number of hops the loopback cell should traverse inside the Cascade network before being echoed back by the far Cascade device. |
| 1.3.6.1.4.1.277.1.6.1.1.117 | cktOamLoopbackCount | 0 | 0 | Number of oam loopback cells left to send this session. Setting this from zero to non-zero starts the loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.118 | cktOamLoopbackReceived | 0 | 0 | Number of oam responses received for this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.119 | cktOamLoopbackTimeouts | 0 | 0 | Number of times a loopback response was not received within the timeout period during this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.120 | cktOamLoopbackReceivedHigh | 0 | 0 | Highest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.121 | cktOamLoopbackReceivedLow | 0 | 0 | Lowest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.122 | cktOamLoopbackReceivedAvg | 0 | 0 | Average response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.123 | cktOamAlarmDisable | 0 | 0 | If disabled, then don't generate oam alarms if this circuit is down. |
| 1.3.6.1.4.1.277.1.6.1.1.124 | cktShaperId | 0 | 0 | The shaper to be used for this virtual connection interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card Values: 1..16 |
| 1.3.6.1.4.1.277.1.6.1.1.125 | cktOspfCtd, cktReqCDV | 0 | 0 | The allowed cell delay: 4-port CBR E1/DS1 card The maximum allowed cell delay in msec |
| 1.3.6.1.4.1.277.1.6.1.1.126 | cktOspfCdv, cktReqRCDV | 0 | 0 | The requested reverse cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.127 | cktOutPort | 0 | 0 | The outgoing port number for the adjacent VC entry in this switch. |
| 1.3.6.1.4.1.277.1.6.1.1.128 | cktOutVc | 0 | 0 | The adjacent VC entry corresponding to this circuit across the bus. |
| 1.3.6.1.4.1.277.1.6.1.1.129 | cktRVc | 0 | 0 | The adjacent VC entry corresponding to this circuit across the trunk. |
| 1.3.6.1.4.1.277.1.6.1.1.130 | cktEntryType | 0 | 0 | The internal type of circuit entry allocated by the circuit manager. |
| 1.3.6.1.4.1.277.1.6.1.1.131 | cktDiagStr | 0 | 0 | Internal diagnostic information. |
| 1.3.6.1.4.1.277.1.6.1.1.132 | cktSvcAalType | 0 | 0 | The AAL type for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.133 | cktSvcBBearerClass | 0 | 0 | The Broadband bearer capability class for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.134 | cktSvcBBearerClippingSusc | 0 | 0 | The Broadband bearer capability clipping susceptibility for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.135 | cktSvcBBearerTmgReq | 0 | 0 | The Broadband bearer capability timing requirements for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.136 | cktSvcBBearerTfcType | 0 | 0 | The Broadband bearer capability traffic type for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.137 | cktAtmUPCEnable | 0 | 0 | Enable ATM UPC Function. |
| 1.3.6.1.4.1.277.1.6.1.1.138 | cktRPriority | 0 | 0 | The priority level (0 through 3) for this circuit in the opposite direction. When port service type is defined as 'mono-class', … |
| 1.3.6.1.4.1.277.1.6.1.1.139 | cktRtPriority | 0 | 0 | The routing priority level of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.140 | cktDeltaBc | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as committed bits during the measurement interval … |
| 1.3.6.1.4.1.277.1.6.1.1.141 | cktDeltaBe | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits during the measurement inte… |
| 1.3.6.1.4.1.277.1.6.1.1.142 | cktDeltaRBc | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as committed bits in the opposite direction during… |
| 1.3.6.1.4.1.277.1.6.1.1.143 | cktDeltaRBe | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits in the opposite direction d… |
| 1.3.6.1.4.1.277.1.6.1.1.144 | cktRedFrPcnt | 0 | 0 | The percentage of RED frame bits that are allowed to enter the network, during the measurement interval, under non-congestion con… |
| 1.3.6.1.4.1.277.1.6.1.1.145 | cktRedFrRPcnt | 0 | 0 | The percentage of RED frame bits that are allowed to enter the network in the opposite direction, during the measurement interval… |
| 1.3.6.1.4.1.277.1.6.1.1.146 | cktRateEnforceSchm | 0 | 0 | Variable used to indicate the rate enforcement scheme employed. 0: Slide window rate enforcement scheme 1: Jump window rate enfor… |
| 1.3.6.1.4.1.277.1.6.1.1.147 | cktRateEnforceRSchm | 0 | 0 | Variable used to indicate the rate enforcement scheme employed in the opposite direction. 0: Slide window rate enforcement scheme… |
| 1.3.6.1.4.1.277.1.6.1.1.148 | cktROde | 0 | 0 | This variable states whether graceful discard is enabled for the ckt in the opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.149 | cktPrivateNet | 0 | 0 | If non-zero, indicates the private network that the circuit belongs to. If 0, the circuit has access to the entire public portion… |
| 1.3.6.1.4.1.277.1.6.1.1.150 | cktPrivateNetOverflow | 0 | 0 | Indicates how private network circuits are handled, when the resources of the network have become exhausted. If set to use-public… |
| 1.3.6.1.4.1.277.1.6.1.1.151 | cktCustomerID | 0 | 0 | The Customer that owns this circuit. For Virtual Private Networking Support. |
| 1.3.6.1.4.1.277.1.6.1.1.152 | cktAtmCDVT | 0 | 0 | The Cell Delay Variation Tolerance for the VC |
| 1.3.6.1.4.1.277.1.6.1.1.153 | cktNdcEnable | 0 | 0 | Enable/disable Network Data Collection for a PVC on an IOM. The number of NDC-monitored PVCs is limited as follows: 30 per DS3 in… |
| 1.3.6.1.4.1.277.1.6.1.1.154 | cktInterworkingFrToAtmCLP | 0 | 0 | CLP mapping for Frame Relay To ATM Service Interworking. |
| 1.3.6.1.4.1.277.1.6.1.1.155 | cktInterworkingFrToAtmDe | 0 | 0 | DE bit mapping for ATM To Frame Relay Service Interworking. |
| 1.3.6.1.4.1.277.1.6.1.1.156 | cktNrtsCLP1 | 0 | 0 | Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the forward … |
| 1.3.6.1.4.1.277.1.6.1.1.157 | cktNrtsDiscardClp0 | 0 | 0 | The number of the CLP0 cells received and discarded by the NRTS processor. |
| 1.3.6.1.4.1.277.1.6.1.1.159 | cktMPEnableAMF | 0 | 0 | Whether the Multilink PPP PVC Attributes Modification Feature is enabled. |
| 1.3.6.1.4.1.277.1.6.1.1.160 | cktMPEligible | 0 | 0 | Whether this circuit is eligible to be a member of a Multilink PPP bundle. |
| 1.3.6.1.4.1.277.1.6.1.1.161 | cktMPForcedCaller | 0 | 0 | Whether this end of the circuit has been forced to be caller to support Multilink PPP PVC Attributes Modification Feature. |
| 1.3.6.1.4.1.277.1.6.1.1.162 | cktMPForcedCallee | 0 | 0 | Whether this end of the circuit has been forced to be callee to support Multilink PPP PVC Attributes Modification Feature. |
| 1.3.6.1.4.1.277.1.6.1.1.163 | cktFrameSize | 0 | 0 | The average frame size (measured in number of bytes) of the traffic on the circuit. If not configured, it is set to 280 (bytes) … |
| 1.3.6.1.4.1.277.1.6.1.1.164 | cktRFrameSize | 0 | 0 | The average frame size (measured in number of bytes) of the traffic on the circuit on the reverse direction. If not configured, … |
| 1.3.6.1.4.1.277.1.6.1.1.165 | cktRNrtsCLP1 | 0 | 0 | Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the reverse … |
| 1.3.6.1.4.1.277.1.6.1.1.166 | cktBBearerAtmTransferCapability | 0 | 0 | The broadband bearer ATM transfer capability of this SVC. This object is not pertinent to IISP 3.x, UNI 3.x or Q.2931 signaling. |
| 1.3.6.1.4.1.277.1.6.1.1.167 | cktAtmFrameDiscard | 0 | 0 | The ATM frame discard state for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.168 | cktRAtmFrameDiscard | 0 | 0 | The reverse ATM frame discard state for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.169 | cktAbrFRMRTT | 0 | 0 | The ABR fixed RM round trip time for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.170 | cktAbrICR | 0 | 0 | The ABR initial cell rate for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.171 | cktRAbrICR | 0 | 0 | The reverse ABR initial cell rate for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.172 | cktAbrRIF | 0 | 0 | The ABR rate increase factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.173 | cktRAbrRIF | 0 | 0 | The reverse ABR rate increase factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.174 | cktAbrRDF | 0 | 0 | The ABR rate decrease factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.175 | cktRAbrRDF | 0 | 0 | The reverse ABR rate decrease factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.176 | cktAbrTBE | 0 | 0 | The ABR transient buffer exposure for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.177 | cktRAbrTBE | 0 | 0 | The reverse ABR transient buffer exposure for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.178 | cktAbrNRM | 0 | 0 | The ABR NRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.179 | cktRAbrNRM | 0 | 0 | The reverse ABR NRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.180 | cktAbrTRM | 0 | 0 | The ABR TRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.181 | cktRAbrTRM | 0 | 0 | The reverse ABR TRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.182 | cktAbrCDF | 0 | 0 | The ABR CDF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.183 | cktRAbrCDF | 0 | 0 | The reverse ABR CDF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.184 | cktAbrADTF | 0 | 0 | The ABR ADTF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.185 | cktRAbrADTF | 0 | 0 | The reverse ABR ADTF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.186 | cktAccumCTD | 0 | 0 | The accumulated cell transfer delay for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.187 | cktAccumCDV | 0 | 0 | The accumulated cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.188 | cktAccumRCDV | 0 | 0 | The accumulated reverse cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.189 | cktCLR | 0 | 0 | The cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss ratio ac… |
| 1.3.6.1.4.1.277.1.6.1.1.190 | cktRCLR | 0 | 0 | The reverse cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss… |
| 1.3.6.1.4.1.277.1.6.1.1.191 | cktAtmLijId | 0 | 0 | The Leaf Initiated Join ID of the PMP SVC rooted at this interface. |
| 1.3.6.1.4.1.277.1.6.1.1.192 | cktAtmLijType | 0 | 0 | The Leaf Initiated Join type of the PMP SVC rooted at this interface. |
| 1.3.6.1.4.1.277.1.6.1.1.193 | cktRtLastDelay | 0 | 0 | The last round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.194 | cktRtAccuMinDelay | 0 | 0 | The prev min round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.195 | cktRtAccuMaxDelay | 0 | 0 | The prev max round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.196 | cktRtAccuAvgDelay | 0 | 0 | The prev avg round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.197 | cktQosIntPeriod | 0 | 0 | The number of periods for calculating qos params. |
| 1.3.6.1.4.1.277.1.6.1.1.198 | cktAtmOutOAMClp0Cells | 0 | 0 | The number of OAM CLP0 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separa… |
| 1.3.6.1.4.1.277.1.6.1.1.199 | cktAtmOutOAMClp1Cells | 0 | 0 | The number of OAM CLP1 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separa… |
| 1.3.6.1.4.1.277.1.6.1.1.200 | cktReqCTD | 0 | 0 | The requested cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.201 | cktInOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.202 | cktOutOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.203 | cktInDEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound DE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.204 | cktOutDEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound DE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.205 | cktInODEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.206 | cktOutODEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.207 | cktAdminCostThreshold | 0 | 0 | Maximum allowable admin cost for the circuit. If no paths are available with cost less than or equal to this value, the circuit i… |
| 1.3.6.1.4.1.277.1.6.1.1.208 | cktAtmSvcServiceCategory | 0 | 0 | The derived service category in the forward direction for this ATM SVC. |
| ... | ||||