The average frame size (measured in number of bytes) of the traffic
on the circuit on the reverse direction. If not configured, it is
set to 280 (bytes) by default.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The average frame size (measured in number of bytes) of the traffic
on the circuit on the reverse direction. If not configured, it is
set to 280 (bytes) by default.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cktRFrameSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The average frame size (measured in number of bytes) of the traffic on the circuit on the reverse direction. If not configured, it is set to 280 (bytes) by default." ::= { cktEntry 164 }
cktRFrameSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The average frame size (measured in number of bytes) of the traffic on the circuit on the reverse direction. If not configured, it is set to 280 (bytes) by default." ::= { cktEntry 164 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.6.1.1.114 | cktOamLoopbackDirection | 0 | 0 | Which direction to send the loopback cell. If 'local', send out this circuit entry's port. If 'remote', send out the remote ci… |
| 1.3.6.1.4.1.277.1.6.1.1.115 | cktOamLoopbackType | 0 | 0 | Type of oam loopback to send - either segment or end to end. |
| 1.3.6.1.4.1.277.1.6.1.1.116 | cktOamLoopbackHops | 0 | 0 | Number of hops the loopback cell should traverse inside the Cascade network before being echoed back by the far Cascade device. |
| 1.3.6.1.4.1.277.1.6.1.1.117 | cktOamLoopbackCount | 0 | 0 | Number of oam loopback cells left to send this session. Setting this from zero to non-zero starts the loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.118 | cktOamLoopbackReceived | 0 | 0 | Number of oam responses received for this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.119 | cktOamLoopbackTimeouts | 0 | 0 | Number of times a loopback response was not received within the timeout period during this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.120 | cktOamLoopbackReceivedHigh | 0 | 0 | Highest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.121 | cktOamLoopbackReceivedLow | 0 | 0 | Lowest response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.122 | cktOamLoopbackReceivedAvg | 0 | 0 | Average response time (in milliseconds) of an oam loopback response this loopback session. |
| 1.3.6.1.4.1.277.1.6.1.1.123 | cktOamAlarmDisable | 0 | 0 | If disabled, then don't generate oam alarms if this circuit is down. |
| 1.3.6.1.4.1.277.1.6.1.1.124 | cktShaperId | 0 | 0 | The shaper to be used for this virtual connection interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card Values: 1..16 |
| 1.3.6.1.4.1.277.1.6.1.1.125 | cktOspfCtd, cktReqCDV | 0 | 0 | The allowed cell delay: 4-port CBR E1/DS1 card The maximum allowed cell delay in msec |
| 1.3.6.1.4.1.277.1.6.1.1.126 | cktOspfCdv, cktReqRCDV | 0 | 0 | The requested reverse cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.127 | cktOutPort | 0 | 0 | The outgoing port number for the adjacent VC entry in this switch. |
| 1.3.6.1.4.1.277.1.6.1.1.128 | cktOutVc | 0 | 0 | The adjacent VC entry corresponding to this circuit across the bus. |
| 1.3.6.1.4.1.277.1.6.1.1.129 | cktRVc | 0 | 0 | The adjacent VC entry corresponding to this circuit across the trunk. |
| 1.3.6.1.4.1.277.1.6.1.1.130 | cktEntryType | 0 | 0 | The internal type of circuit entry allocated by the circuit manager. |
| 1.3.6.1.4.1.277.1.6.1.1.131 | cktDiagStr | 0 | 0 | Internal diagnostic information. |
| 1.3.6.1.4.1.277.1.6.1.1.132 | cktSvcAalType | 0 | 0 | The AAL type for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.133 | cktSvcBBearerClass | 0 | 0 | The Broadband bearer capability class for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.134 | cktSvcBBearerClippingSusc | 0 | 0 | The Broadband bearer capability clipping susceptibility for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.135 | cktSvcBBearerTmgReq | 0 | 0 | The Broadband bearer capability timing requirements for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.136 | cktSvcBBearerTfcType | 0 | 0 | The Broadband bearer capability traffic type for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.137 | cktAtmUPCEnable | 0 | 0 | Enable ATM UPC Function. |
| 1.3.6.1.4.1.277.1.6.1.1.138 | cktRPriority | 0 | 0 | The priority level (0 through 3) for this circuit in the opposite direction. When port service type is defined as 'mono-class', … |
| 1.3.6.1.4.1.277.1.6.1.1.139 | cktRtPriority | 0 | 0 | The routing priority level of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.140 | cktDeltaBc | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as committed bits during the measurement interval … |
| 1.3.6.1.4.1.277.1.6.1.1.141 | cktDeltaBe | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits during the measurement inte… |
| 1.3.6.1.4.1.277.1.6.1.1.142 | cktDeltaRBc | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as committed bits in the opposite direction during… |
| 1.3.6.1.4.1.277.1.6.1.1.143 | cktDeltaRBe | 0 | 0 | The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits in the opposite direction d… |
| 1.3.6.1.4.1.277.1.6.1.1.144 | cktRedFrPcnt | 0 | 0 | The percentage of RED frame bits that are allowed to enter the network, during the measurement interval, under non-congestion con… |
| 1.3.6.1.4.1.277.1.6.1.1.145 | cktRedFrRPcnt | 0 | 0 | The percentage of RED frame bits that are allowed to enter the network in the opposite direction, during the measurement interval… |
| 1.3.6.1.4.1.277.1.6.1.1.146 | cktRateEnforceSchm | 0 | 0 | Variable used to indicate the rate enforcement scheme employed. 0: Slide window rate enforcement scheme 1: Jump window rate enfor… |
| 1.3.6.1.4.1.277.1.6.1.1.147 | cktRateEnforceRSchm | 0 | 0 | Variable used to indicate the rate enforcement scheme employed in the opposite direction. 0: Slide window rate enforcement scheme… |
| 1.3.6.1.4.1.277.1.6.1.1.148 | cktROde | 0 | 0 | This variable states whether graceful discard is enabled for the ckt in the opposite direction. |
| 1.3.6.1.4.1.277.1.6.1.1.149 | cktPrivateNet | 0 | 0 | If non-zero, indicates the private network that the circuit belongs to. If 0, the circuit has access to the entire public portion… |
| 1.3.6.1.4.1.277.1.6.1.1.150 | cktPrivateNetOverflow | 0 | 0 | Indicates how private network circuits are handled, when the resources of the network have become exhausted. If set to use-public… |
| 1.3.6.1.4.1.277.1.6.1.1.151 | cktCustomerID | 0 | 0 | The Customer that owns this circuit. For Virtual Private Networking Support. |
| 1.3.6.1.4.1.277.1.6.1.1.152 | cktAtmCDVT | 0 | 0 | The Cell Delay Variation Tolerance for the VC |
| 1.3.6.1.4.1.277.1.6.1.1.153 | cktNdcEnable | 0 | 0 | Enable/disable Network Data Collection for a PVC on an IOM. The number of NDC-monitored PVCs is limited as follows: 30 per DS3 in… |
| 1.3.6.1.4.1.277.1.6.1.1.154 | cktInterworkingFrToAtmCLP | 0 | 0 | CLP mapping for Frame Relay To ATM Service Interworking. |
| 1.3.6.1.4.1.277.1.6.1.1.155 | cktInterworkingFrToAtmDe | 0 | 0 | DE bit mapping for ATM To Frame Relay Service Interworking. |
| 1.3.6.1.4.1.277.1.6.1.1.156 | cktNrtsCLP1 | 0 | 0 | Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the forward … |
| 1.3.6.1.4.1.277.1.6.1.1.157 | cktNrtsDiscardClp0 | 0 | 0 | The number of the CLP0 cells received and discarded by the NRTS processor. |
| 1.3.6.1.4.1.277.1.6.1.1.158 | cktNrtsDiscardClp1 | 0 | 0 | The number of the CLP1 cells received and discarded by the NRTS processor. |
| 1.3.6.1.4.1.277.1.6.1.1.159 | cktMPEnableAMF | 0 | 0 | Whether the Multilink PPP PVC Attributes Modification Feature is enabled. |
| 1.3.6.1.4.1.277.1.6.1.1.160 | cktMPEligible | 0 | 0 | Whether this circuit is eligible to be a member of a Multilink PPP bundle. |
| 1.3.6.1.4.1.277.1.6.1.1.161 | cktMPForcedCaller | 0 | 0 | Whether this end of the circuit has been forced to be caller to support Multilink PPP PVC Attributes Modification Feature. |
| 1.3.6.1.4.1.277.1.6.1.1.162 | cktMPForcedCallee | 0 | 0 | Whether this end of the circuit has been forced to be callee to support Multilink PPP PVC Attributes Modification Feature. |
| 1.3.6.1.4.1.277.1.6.1.1.163 | cktFrameSize | 0 | 0 | The average frame size (measured in number of bytes) of the traffic on the circuit. If not configured, it is set to 280 (bytes) … |
| 1.3.6.1.4.1.277.1.6.1.1.165 | cktRNrtsCLP1 | 0 | 0 | Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the reverse … |
| 1.3.6.1.4.1.277.1.6.1.1.166 | cktBBearerAtmTransferCapability | 0 | 0 | The broadband bearer ATM transfer capability of this SVC. This object is not pertinent to IISP 3.x, UNI 3.x or Q.2931 signaling. |
| 1.3.6.1.4.1.277.1.6.1.1.167 | cktAtmFrameDiscard | 0 | 0 | The ATM frame discard state for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.168 | cktRAtmFrameDiscard | 0 | 0 | The reverse ATM frame discard state for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.169 | cktAbrFRMRTT | 0 | 0 | The ABR fixed RM round trip time for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.170 | cktAbrICR | 0 | 0 | The ABR initial cell rate for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.171 | cktRAbrICR | 0 | 0 | The reverse ABR initial cell rate for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.172 | cktAbrRIF | 0 | 0 | The ABR rate increase factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.173 | cktRAbrRIF | 0 | 0 | The reverse ABR rate increase factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.174 | cktAbrRDF | 0 | 0 | The ABR rate decrease factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.175 | cktRAbrRDF | 0 | 0 | The reverse ABR rate decrease factor for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.176 | cktAbrTBE | 0 | 0 | The ABR transient buffer exposure for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.177 | cktRAbrTBE | 0 | 0 | The reverse ABR transient buffer exposure for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.178 | cktAbrNRM | 0 | 0 | The ABR NRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.179 | cktRAbrNRM | 0 | 0 | The reverse ABR NRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.180 | cktAbrTRM | 0 | 0 | The ABR TRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.181 | cktRAbrTRM | 0 | 0 | The reverse ABR TRM for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.182 | cktAbrCDF | 0 | 0 | The ABR CDF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.183 | cktRAbrCDF | 0 | 0 | The reverse ABR CDF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.184 | cktAbrADTF | 0 | 0 | The ABR ADTF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.185 | cktRAbrADTF | 0 | 0 | The reverse ABR ADTF for this SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.186 | cktAccumCTD | 0 | 0 | The accumulated cell transfer delay for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.187 | cktAccumCDV | 0 | 0 | The accumulated cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.188 | cktAccumRCDV | 0 | 0 | The accumulated reverse cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.189 | cktCLR | 0 | 0 | The cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss ratio ac… |
| 1.3.6.1.4.1.277.1.6.1.1.190 | cktRCLR | 0 | 0 | The reverse cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss… |
| 1.3.6.1.4.1.277.1.6.1.1.191 | cktAtmLijId | 0 | 0 | The Leaf Initiated Join ID of the PMP SVC rooted at this interface. |
| 1.3.6.1.4.1.277.1.6.1.1.192 | cktAtmLijType | 0 | 0 | The Leaf Initiated Join type of the PMP SVC rooted at this interface. |
| 1.3.6.1.4.1.277.1.6.1.1.193 | cktRtLastDelay | 0 | 0 | The last round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.194 | cktRtAccuMinDelay | 0 | 0 | The prev min round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.195 | cktRtAccuMaxDelay | 0 | 0 | The prev max round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.196 | cktRtAccuAvgDelay | 0 | 0 | The prev avg round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.197 | cktQosIntPeriod | 0 | 0 | The number of periods for calculating qos params. |
| 1.3.6.1.4.1.277.1.6.1.1.198 | cktAtmOutOAMClp0Cells | 0 | 0 | The number of OAM CLP0 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separa… |
| 1.3.6.1.4.1.277.1.6.1.1.199 | cktAtmOutOAMClp1Cells | 0 | 0 | The number of OAM CLP1 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separa… |
| 1.3.6.1.4.1.277.1.6.1.1.200 | cktReqCTD | 0 | 0 | The requested cell delay variation for this circuit, in microseconds. |
| 1.3.6.1.4.1.277.1.6.1.1.201 | cktInOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.202 | cktOutOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.203 | cktInDEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound DE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.204 | cktOutDEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound DE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.205 | cktInODEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.206 | cktOutODEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics. |
| 1.3.6.1.4.1.277.1.6.1.1.207 | cktAdminCostThreshold | 0 | 0 | Maximum allowable admin cost for the circuit. If no paths are available with cost less than or equal to this value, the circuit i… |
| 1.3.6.1.4.1.277.1.6.1.1.208 | cktAtmSvcServiceCategory | 0 | 0 | The derived service category in the forward direction for this ATM SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.209 | cktAtmSvcRServiceCategory | 0 | 0 | The derived service category in the reverse direction for this ATM SVC. |
| 1.3.6.1.4.1.277.1.6.1.1.210 | cktInterworkingFrToAtmEFCI | 0 | 0 | EFCI mapping for Frame Relay To ATM Service Interworking. |
| 1.3.6.1.4.1.277.1.6.1.1.211 | cktDiagSARMon | 0 | 0 | Used to start or stop flow on the inbound/outbound ATMizer without informing the PPC. |
| 1.3.6.1.4.1.277.1.6.1.1.212 | cktAdminCostReal | 0 | 0 | Actual value of total administration cost of a circuit. Ranges from 0 to 0xFFFFFFFF. |
| 1.3.6.1.4.1.277.1.6.1.1.213 | cktAtmInClp0Cells | 0 | 0 | The Number of ATM CLP 0 cells received on a VC (VPC or VCC). |
| 1.3.6.1.4.1.277.1.6.1.1.214 | cktAtmInClp1Cells | 0 | 0 | The Number of ATM CLP 1 cells received on a VC (VPC or VCC). |
| ... | ||||