Used to start or stop flow on the inbound/outbound ATMizer
without informing the PPC.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
Used to start or stop flow on the inbound/outbound ATMizer
without informing the PPC.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cktDiagSARMon OBJECT-TYPE SYNTAX INTEGER { flowOnInbound (1), flowOffInbound (2), flowOnOutbound (3), flowOffOutbound (4), flowOnInboundOutbound (5), flowOffInboundOutbound (6) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to start or stop flow on the inbound/outbound ATMizer without informing the PPC." ::= { cktEntry 211 }
cktDiagSARMon OBJECT-TYPE SYNTAX INTEGER { flowOnInbound (1), flowOffInbound (2), flowOnOutbound (3), flowOffOutbound (4), flowOnInboundOutbound (5), flowOffInboundOutbound (6) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to start or stop flow on the inbound/outbound ATMizer without informing the PPC." ::= { cktEntry 211 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.277.1.6.1.1.161 | cktMPForcedCaller | 0 | 0 | Whether this end of the circuit has been forced to be caller to support Multilink PPP PVC Attributes Modification Feature. |
1.3.6.1.4.1.277.1.6.1.1.162 | cktMPForcedCallee | 0 | 0 | Whether this end of the circuit has been forced to be callee to support Multilink PPP PVC Attributes Modification Feature. |
1.3.6.1.4.1.277.1.6.1.1.163 | cktFrameSize | 0 | 0 | The average frame size (measured in number of bytes) of the traffic on the circuit. If not configured, it is set to 280 (bytes) … |
1.3.6.1.4.1.277.1.6.1.1.164 | cktRFrameSize | 0 | 0 | The average frame size (measured in number of bytes) of the traffic on the circuit on the reverse direction. If not configured, … |
1.3.6.1.4.1.277.1.6.1.1.165 | cktRNrtsCLP1 | 0 | 0 | Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the reverse … |
1.3.6.1.4.1.277.1.6.1.1.166 | cktBBearerAtmTransferCapability | 0 | 0 | The broadband bearer ATM transfer capability of this SVC. This object is not pertinent to IISP 3.x, UNI 3.x or Q.2931 signaling. |
1.3.6.1.4.1.277.1.6.1.1.167 | cktAtmFrameDiscard | 0 | 0 | The ATM frame discard state for this circuit. |
1.3.6.1.4.1.277.1.6.1.1.168 | cktRAtmFrameDiscard | 0 | 0 | The reverse ATM frame discard state for this circuit. |
1.3.6.1.4.1.277.1.6.1.1.169 | cktAbrFRMRTT | 0 | 0 | The ABR fixed RM round trip time for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.170 | cktAbrICR | 0 | 0 | The ABR initial cell rate for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.171 | cktRAbrICR | 0 | 0 | The reverse ABR initial cell rate for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.172 | cktAbrRIF | 0 | 0 | The ABR rate increase factor for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.173 | cktRAbrRIF | 0 | 0 | The reverse ABR rate increase factor for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.174 | cktAbrRDF | 0 | 0 | The ABR rate decrease factor for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.175 | cktRAbrRDF | 0 | 0 | The reverse ABR rate decrease factor for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.176 | cktAbrTBE | 0 | 0 | The ABR transient buffer exposure for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.177 | cktRAbrTBE | 0 | 0 | The reverse ABR transient buffer exposure for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.178 | cktAbrNRM | 0 | 0 | The ABR NRM for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.179 | cktRAbrNRM | 0 | 0 | The reverse ABR NRM for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.180 | cktAbrTRM | 0 | 0 | The ABR TRM for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.181 | cktRAbrTRM | 0 | 0 | The reverse ABR TRM for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.182 | cktAbrCDF | 0 | 0 | The ABR CDF for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.183 | cktRAbrCDF | 0 | 0 | The reverse ABR CDF for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.184 | cktAbrADTF | 0 | 0 | The ABR ADTF for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.185 | cktRAbrADTF | 0 | 0 | The reverse ABR ADTF for this SVC. |
1.3.6.1.4.1.277.1.6.1.1.186 | cktAccumCTD | 0 | 0 | The accumulated cell transfer delay for this circuit, in microseconds. |
1.3.6.1.4.1.277.1.6.1.1.187 | cktAccumCDV | 0 | 0 | The accumulated cell delay variation for this circuit, in microseconds. |
1.3.6.1.4.1.277.1.6.1.1.188 | cktAccumRCDV | 0 | 0 | The accumulated reverse cell delay variation for this circuit, in microseconds. |
1.3.6.1.4.1.277.1.6.1.1.189 | cktCLR | 0 | 0 | The cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss ratio ac… |
1.3.6.1.4.1.277.1.6.1.1.190 | cktRCLR | 0 | 0 | The reverse cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss… |
1.3.6.1.4.1.277.1.6.1.1.191 | cktAtmLijId | 0 | 0 | The Leaf Initiated Join ID of the PMP SVC rooted at this interface. |
1.3.6.1.4.1.277.1.6.1.1.192 | cktAtmLijType | 0 | 0 | The Leaf Initiated Join type of the PMP SVC rooted at this interface. |
1.3.6.1.4.1.277.1.6.1.1.193 | cktRtLastDelay | 0 | 0 | The last round-trip delay (micro-seconds). |
1.3.6.1.4.1.277.1.6.1.1.194 | cktRtAccuMinDelay | 0 | 0 | The prev min round-trip delay (micro-seconds). |
1.3.6.1.4.1.277.1.6.1.1.195 | cktRtAccuMaxDelay | 0 | 0 | The prev max round-trip delay (micro-seconds). |
1.3.6.1.4.1.277.1.6.1.1.196 | cktRtAccuAvgDelay | 0 | 0 | The prev avg round-trip delay (micro-seconds). |
1.3.6.1.4.1.277.1.6.1.1.197 | cktQosIntPeriod | 0 | 0 | The number of periods for calculating qos params. |
1.3.6.1.4.1.277.1.6.1.1.198 | cktAtmOutOAMClp0Cells | 0 | 0 | The number of OAM CLP0 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separa… |
1.3.6.1.4.1.277.1.6.1.1.199 | cktAtmOutOAMClp1Cells | 0 | 0 | The number of OAM CLP1 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separa… |
1.3.6.1.4.1.277.1.6.1.1.200 | cktReqCTD | 0 | 0 | The requested cell delay variation for this circuit, in microseconds. |
1.3.6.1.4.1.277.1.6.1.1.201 | cktInOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound octets (bytes) for the circuit - from Bulk Statistics. |
1.3.6.1.4.1.277.1.6.1.1.202 | cktOutOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound octets (bytes) for the circuit - from Bulk Statistics. |
1.3.6.1.4.1.277.1.6.1.1.203 | cktInDEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound DE-marked octets (bytes) for the circuit - from Bulk Statistics. |
1.3.6.1.4.1.277.1.6.1.1.204 | cktOutDEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound DE-marked octets (bytes) for the circuit - from Bulk Statistics. |
1.3.6.1.4.1.277.1.6.1.1.205 | cktInODEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of inbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics. |
1.3.6.1.4.1.277.1.6.1.1.206 | cktOutODEOctetsPeak | 0 | 0 | The 5-minute peak value of the number of outbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics. |
1.3.6.1.4.1.277.1.6.1.1.207 | cktAdminCostThreshold | 0 | 0 | Maximum allowable admin cost for the circuit. If no paths are available with cost less than or equal to this value, the circuit i… |
1.3.6.1.4.1.277.1.6.1.1.208 | cktAtmSvcServiceCategory | 0 | 0 | The derived service category in the forward direction for this ATM SVC. |
1.3.6.1.4.1.277.1.6.1.1.209 | cktAtmSvcRServiceCategory | 0 | 0 | The derived service category in the reverse direction for this ATM SVC. |
1.3.6.1.4.1.277.1.6.1.1.210 | cktInterworkingFrToAtmEFCI | 0 | 0 | EFCI mapping for Frame Relay To ATM Service Interworking. |
1.3.6.1.4.1.277.1.6.1.1.212 | cktAdminCostReal | 0 | 0 | Actual value of total administration cost of a circuit. Ranges from 0 to 0xFFFFFFFF. |
1.3.6.1.4.1.277.1.6.1.1.213 | cktAtmInClp0Cells | 0 | 0 | The Number of ATM CLP 0 cells received on a VC (VPC or VCC). |
1.3.6.1.4.1.277.1.6.1.1.214 | cktAtmInClp1Cells | 0 | 0 | The Number of ATM CLP 1 cells received on a VC (VPC or VCC). |
1.3.6.1.4.1.277.1.6.1.1.215 | cktATMAAL5CRC32Error | 0 | 0 | Number of received AAL5 packets with CRC32 errors. |
1.3.6.1.4.1.277.1.6.1.1.216 | cktATMAAL5CPIError | 0 | 0 | Number of received AAL5 packets with CPI errors The only valid value currently defined for the CPI field is all zeros |
1.3.6.1.4.1.277.1.6.1.1.217 | cktATMAAL5LengthError | 0 | 0 | Number of received AAL5 packets which satisfied one of the following error conditions: 1. number of received cells * 48 bytes - l… |
1.3.6.1.4.1.277.1.6.1.1.218 | cktATMAAL5ReassemblyTimerError | 0 | 0 | Number of expired reassembly timers |
1.3.6.1.4.1.277.1.6.1.1.219 | cktATMAAL5MaxNrSegError | 0 | 0 | Number of received AAL5 packets which exceeds the maximum allowed length |
1.3.6.1.4.1.277.1.6.1.1.220 | cktIWF1490to1483Error | 0 | 0 | Number of Frames received that failed the rfc1490 to rfc 1483 header translation. This error counter indicates that frames being… |
1.3.6.1.4.1.277.1.6.1.1.221 | cktIWF1490to1483LastBadHeader | 0 | 0 | Ascii string of the first 8 bytes of the header from the last frame discarded because the 1490 to 1483 header translation failed… |
1.3.6.1.4.1.277.1.6.1.1.222 | cktIWF1483to1490Error | 0 | 0 | Number of Frames received that failed the rfc1483 to rfc 1490 header translation. This error counter indicates that frames being… |
1.3.6.1.4.1.277.1.6.1.1.223 | cktIWF1483to1490LastBadHeader | 0 | 0 | Ascii string of the first 10 bytes of the header from the last frame discarded because the 1483 to 1490 header translation faile… |
... |