The circuit path consisting a sequence of outbound interface
indexes at nodes along the established circuit. The format is
interface:interface:interface......
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The circuit path consisting a sequence of outbound interface
indexes at nodes along the established circuit. The format is
interface:interface:interface......
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cktPath OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The circuit path consisting a sequence of outbound interface indexes at nodes along the established circuit. The format is interface:interface:interface......" ::= { cktEntry 26 }
cktPath OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The circuit path consisting a sequence of outbound interface indexes at nodes along the established circuit. The format is interface:interface:interface......" ::= { cktEntry 26 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.6.1.1.1 | cktSrcIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.277.1.6.1.1.2 | cktSrcDlci | 0 | 0 | The DLCI used as the key for the circuit. For local DLCI significance, this is the local DLCI. For Global DLCI significance, this… |
| 1.3.6.1.4.1.277.1.6.1.1.3 | cktPriority | 0 | 0 | The priority level (1 through 3) for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.4 | cktCir | 0 | 0 | The average number of user data (bits) that the network agrees to transfer over the circuit in one direction, measured over the m… |
| 1.3.6.1.4.1.277.1.6.1.1.5 | cktBc | 0 | 0 | The maximum amount of data (bits) that the network agrees to transfer over the circuit under normal conditions, during the measur… |
| 1.3.6.1.4.1.277.1.6.1.1.6 | cktBe | 0 | 0 | The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit during the measurement i… |
| 1.3.6.1.4.1.277.1.6.1.1.7 | cktDestNodeId | 0 | 0 | The destination node ID for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.8 | cktDestIfIndex | 0 | 0 | The interface identifier at the destination node for this circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.9 | cktDestDlci | 0 | 0 | The DLCI which is the destination of the key DLCI. For local DLCI significance, this is the remote DLCI since the key DLCI is the… |
| 1.3.6.1.4.1.277.1.6.1.1.10 | cktTos | 0 | 0 | The type of service for the circuit. Only committed is supported in the FCS. |
| 1.3.6.1.4.1.277.1.6.1.1.11 | cktOde | 0 | 0 | This variable states whether graceful discard is enabled for the ckt. |
| 1.3.6.1.4.1.277.1.6.1.1.12 | cktAdminStatus | 0 | 0 | The desired state of the ckt. |
| 1.3.6.1.4.1.277.1.6.1.1.13 | cktCreationTime | 0 | 0 | The value of sysUpTime when the circuit was created (activated). |
| 1.3.6.1.4.1.277.1.6.1.1.14 | cktLastTimeChange | 0 | 0 | The sysUpTime value when the circuit was last changed to the current state. |
| 1.3.6.1.4.1.277.1.6.1.1.15 | cktVcState | 0 | 0 | The current state of the PVC segment in the Cascade network. |
| 1.3.6.1.4.1.277.1.6.1.1.16 | cktDceState | 0 | 0 | The DCE state of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.17 | cktDteStatus | 0 | 0 | The DTE status of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.18 | cktRnr | 0 | 0 | The receiver's readiness for accepting data flow. |
| 1.3.6.1.4.1.277.1.6.1.1.19 | cktNiDown | 0 | 0 | The state of the network interface. |
| 1.3.6.1.4.1.277.1.6.1.1.20 | cktDteState | 0 | 0 | The DTE state of the circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.21 | cktOperStatus | 0 | 0 | The current operational status of the entire PVC. |
| 1.3.6.1.4.1.277.1.6.1.1.22 | cktOutForward | 0 | 0 | If the value is 1, it means the outbound flow is on. |
| 1.3.6.1.4.1.277.1.6.1.1.23 | cktRerouteCnt | 0 | 0 | The reroute count. |
| 1.3.6.1.4.1.277.1.6.1.1.24 | cktVcPtr | 0 | 0 | An 8-byte Octect string indicating the vc pointer. |
| 1.3.6.1.4.1.277.1.6.1.1.25 | cktHopCnt | 0 | 0 | The count of hops along the circuit path. (Max is 16) |
| 1.3.6.1.4.1.277.1.6.1.1.27 | cktFailReason | 0 | 0 | The reason for the PVC establishment failure. |
| 1.3.6.1.4.1.277.1.6.1.1.28 | cktFailNode | 0 | 0 | The node which causes the PVC failure. |
| 1.3.6.1.4.1.277.1.6.1.1.29 | cktFailPort | 0 | 0 | The port on the fail node which causes the PVC failure. |
| 1.3.6.1.4.1.277.1.6.1.1.30 | cktMcastGroupId | 0 | 0 | Multicast group identifier (1..32). This field is 0 for unicast PVCs. |
| 1.3.6.1.4.1.277.1.6.1.1.31 | cktMcastMemberList | 0 | 0 | A list of operations and the affected unicast DLCIs (lportId, cktId)s in a multicast group. The syntax is as follows: [op:dlci,d… |
| 1.3.6.1.4.1.277.1.6.1.1.32 | cktMcastParentGroups | 0 | 0 | An 8-byte Octect string indicating the parent groups this DLCI belongs to. |
| 1.3.6.1.4.1.277.1.6.1.1.33 | cktInFrames | 0 | 0 | The number of inbound frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.34 | cktInDEFrames | 0 | 0 | The number of inbound DE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.35 | cktInODEFrames | 0 | 0 | The number of inbound ODE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.36 | cktInFECNFrames | 0 | 0 | The number of inbound frames indicating forward congestion since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.37 | cktInBECNFrames | 0 | 0 | The number of inbound frames indicating backward congestion since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.38 | cktInDiscards | 0 | 0 | Number of inbound frames discarded by rate enforcement. |
| 1.3.6.1.4.1.277.1.6.1.1.39 | cktInOctets | 0 | 0 | The number of inbound octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.40 | cktInDEOctets | 0 | 0 | The number of inbound DE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.41 | cktInODEOctets | 0 | 0 | The number of inbound ODE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.42 | cktOutFrames | 0 | 0 | The number of outbound frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.43 | cktOutDEFrames | 0 | 0 | The number of outbound DE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.44 | cktOutODEFrames | 0 | 0 | The number of outbound ODE-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.45 | cktOutFECNFrames | 0 | 0 | The number of outbound FECN-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.46 | cktOutBECNFrames | 0 | 0 | The number of outbound BECN-marked frames since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.47 | cktOutOctets | 0 | 0 | The number of outbound octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.48 | cktOutDEOctets | 0 | 0 | The number of outbound DE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.49 | cktOutODEOctets | 0 | 0 | The number of outbound ODE-marked octets since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.50 | cktOutLostFrames | 0 | 0 | The number of outbound frames that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.51 | cktOutLostDEFrames | 0 | 0 | The number of outbound DE-marked frames that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.52 | cktOutLostODEFrames | 0 | 0 | The number of outbound ODE-marked frames that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.53 | cktOutLostOctets | 0 | 0 | The number of outbound octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.54 | cktOutLostDEOctets | 0 | 0 | The number of outbound DE-marked octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.55 | cktOutLostODEOctets | 0 | 0 | The number of outbound ODE-marked octets that have been lost since the last reset. |
| 1.3.6.1.4.1.277.1.6.1.1.56 | cktRtMinDelay | 0 | 0 | The minimum round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.57 | cktRtMaxDelay | 0 | 0 | The maximum round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.58 | cktRtAvgDelay | 0 | 0 | The average round-trip delay (micro-seconds). |
| 1.3.6.1.4.1.277.1.6.1.1.59 | cktDiagTestId | 0 | 0 | Identification for the diagnostics tests to be run. |
| 1.3.6.1.4.1.277.1.6.1.1.60 | cktDiagTestRuns | 0 | 0 | Number of passes of the diagnostics tests to be run. The default value is 1. |
| 1.3.6.1.4.1.277.1.6.1.1.61 | cktHelloCounter | 0 | 0 | Number of PVC hello pdu frames received in the VC entry of the called side. |
| 1.3.6.1.4.1.277.1.6.1.1.62 | cktHelloAckCounter | 0 | 0 | Number of PVC hello Ack pdu frames received in the VC entry of the calling side. |
| 1.3.6.1.4.1.277.1.6.1.1.63 | cktDefinedPath | 0 | 0 | User defined path. in the format of Nx,x,x,Nx,.... If x is not prefixed with 'N', x is an interface ID. If x is prefixed with `N`… |
| 1.3.6.1.4.1.277.1.6.1.1.64 | cktDefinedPathCount | 0 | 0 | User defined path hop count. |
| 1.3.6.1.4.1.277.1.6.1.1.65 | cktDefinedPathEnable | 0 | 0 | If set to 1, it means there is an user defined path for this circuit and it is enabled. |
| 1.3.6.1.4.1.277.1.6.1.1.66 | cktDefinedPathAltOption | 0 | 0 | If set to 1, it means that if the user defined path fails, use the ospf-determined path. |
| 1.3.6.1.4.1.277.1.6.1.1.67 | cktUsingDefinedPath | 0 | 0 | If set to 1, it indicates the PVC is currently using the defined path. |
| 1.3.6.1.4.1.277.1.6.1.1.68 | cktTryAltPath, ckt0CIRCircuit | 0 | 0 | If set to 1, it means the inactive PVC will be activated on the ospf-determined path in the next retry. |
| 1.3.6.1.4.1.277.1.6.1.1.69 | cktNotVirgin | 0 | 0 | If set to 1, it means this VC entry has been successfuly activated before. |
| 1.3.6.1.4.1.277.1.6.1.1.70 | cktInForward | 0 | 0 | If the value is 1, it means the inbound flow is OK. |
| 1.3.6.1.4.1.277.1.6.1.1.71 | cktBtusSeg | 0 | 0 | Number of Bus xmit units per data segment |
| 1.3.6.1.4.1.277.1.6.1.1.72 | cktInSegmentsDiscards | 0 | 0 | Number of segments received that were discarded because of frame reassembly errors. |
| 1.3.6.1.4.1.277.1.6.1.1.73 | cktAtmVPI | 0 | 0 | VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range… |
| 1.3.6.1.4.1.277.1.6.1.1.74 | cktAtmVCI | 0 | 0 | VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range… |
| 1.3.6.1.4.1.277.1.6.1.1.75 | cktType | 0 | 0 | 1 if a permanent virtual circuit; 2 if a switched virtual circuit. |
| 1.3.6.1.4.1.277.1.6.1.1.76 | cktSvcCallingParty | 0 | 0 | The calling party number if this is a switched virtual circuit. |
| ... | ||||