State of the card's IP routing table. If set to
marginal, the routing table maximum size has
been exceeded. and all routes except management
prefixes have been discarded.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
State of the card's IP routing table. If set to
marginal, the routing table maximum size has
been exceeded. and all routes except management
prefixes have been discarded.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cardIPTableState OBJECT-TYPE SYNTAX INTEGER { normal (1), marginal (2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the card's IP routing table. If set to marginal, the routing table maximum size has been exceeded. and all routes except management prefixes have been discarded." ::= { cardEntry 138 }
cardIPTableState OBJECT-TYPE SYNTAX INTEGER { normal (1), marginal (2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the card's IP routing table. If set to marginal, the routing table maximum size has been exceeded. and all routes except management prefixes have been discarded." ::= { cardEntry 138 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.277.1.7.2.1.88 | cardInErrorCells | 0 | 0 | The total number of cells received on this card with HEC error. |
1.3.6.1.4.1.277.1.7.2.1.89 | cardInErrorVPIVCI | 0 | 0 | The total number of cells received with HEC invalid VPI, VCI. |
1.3.6.1.4.1.277.1.7.2.1.90 | cardOutCells | 0 | 0 | The total number of cells transmitted out of this card |
1.3.6.1.4.1.277.1.7.2.1.91 | cardOutDiscardCells | 0 | 0 | The total number of cells discarded due to congestion on this card |
1.3.6.1.4.1.277.1.7.2.1.92 | cardQOSQueueSize | 0 | 0 | The ATM QOS queue size (per cell) of each port on the card |
1.3.6.1.4.1.277.1.7.2.1.93 | cardLastErrorPort | 0 | 0 | The port number (1 to x) of the last cell with invalid cell header on the card |
1.3.6.1.4.1.277.1.7.2.1.94 | cardLastErrorVPI | 0 | 0 | The VPI of the last cell with invalid cell header on the card |
1.3.6.1.4.1.277.1.7.2.1.95 | cardLastErrorVCI | 0 | 0 | The VCI of the last cell with invalid cell header on the card |
1.3.6.1.4.1.277.1.7.2.1.96 | cardSystemPrimaryClockModeConfig | 0 | 0 | The system primary clock mode. PLCP is for DS3 port only |
1.3.6.1.4.1.277.1.7.2.1.97 | cardSystemSecondaryClockModeConfig | 0 | 0 | The system secondary clock mode. PLCP is for DS3 port only |
1.3.6.1.4.1.277.1.7.2.1.98 | cardNFBDEStatus | 0 | 0 | Non Fatal Background Diagnostic Error Status |
1.3.6.1.4.1.277.1.7.2.1.99 | cardProductCode | 0 | 0 | This card's product code. |
1.3.6.1.4.1.277.1.7.2.1.100 | cardMfgPN | 0 | 0 | This card's manufacturing part number. |
1.3.6.1.4.1.277.1.7.2.1.101 | cardTotalUpTime | 0 | 0 | This card's total accumulated up time, in hours. |
1.3.6.1.4.1.277.1.7.2.1.102 | cardIOAType | 0 | 0 | The type of IOA attached to this card. |
1.3.6.1.4.1.277.1.7.2.1.103 | cardIOAHwRev | 0 | 0 | The attached IOA's hardware revision. |
1.3.6.1.4.1.277.1.7.2.1.104 | cardIOASerial | 0 | 0 | The attached IOA's serial number. |
1.3.6.1.4.1.277.1.7.2.1.105 | cardIOAProductCode | 0 | 0 | The attached IOA's product code. |
1.3.6.1.4.1.277.1.7.2.1.106 | cardIOAMfgPN | 0 | 0 | The attached IOA's manufacturing part number. |
1.3.6.1.4.1.277.1.7.2.1.107 | cardDS0Support | 0 | 0 | Some B-Stdx T1 boards do not support lpbk. |
1.3.6.1.4.1.277.1.7.2.1.108 | cardDiagParamId | 0 | 0 | Parameter identifier for internal diagnostics. |
1.3.6.1.4.1.277.1.7.2.1.109 | cardDiagParamValue | 0 | 0 | Value assigned to parameter specified by cardDiagParamId. |
1.3.6.1.4.1.277.1.7.2.1.110 | cardBulkStatsPeakCapability | 0 | 0 | Configures capability to collect peak 5-minute statistics. Capability change takes effect upon IOM reboot. |
1.3.6.1.4.1.277.1.7.2.1.111 | cardBulkStatsTotalCapability | 0 | 0 | Configures capability to collect total statistics. Capability change takes effect upon IOM reboot. |
1.3.6.1.4.1.277.1.7.2.1.112 | cardBulkStatsPeakEnable | 0 | 0 | Reflects the operational state of the peak 5-minute statistic collection on an IOM. For this setting to be enabled, the respectiv… |
1.3.6.1.4.1.277.1.7.2.1.113 | cardBulkStatsTotalEnable | 0 | 0 | Reflects the operational state of the total statistic collection on an IOM. For this setting to be enabled, the respective capabi… |
1.3.6.1.4.1.277.1.7.2.1.114 | cardBulkStatsBaseCollectPeriod | 0 | 0 | Configures base collection period for bulk statistics on an IOM in minutes. Only the following values are allowed: 15, 20, 30, 60… |
1.3.6.1.4.1.277.1.7.2.1.115 | cardNrtsHwRev | 0 | 0 | Hardware revision of the NRTS processor. |
1.3.6.1.4.1.277.1.7.2.1.116 | cardNrtsOutCellBufSize | 0 | 0 | The size of the NRTS output cell buffer. |
1.3.6.1.4.1.277.1.7.2.1.117 | cardNrtsOperState | 0 | 0 | The operational status of the NRTS processor. |
1.3.6.1.4.1.277.1.7.2.1.118 | cardNrtsAdminState | 0 | 0 | The admin status of the NRTS processor. |
1.3.6.1.4.1.277.1.7.2.1.119 | cardNrtsCcrmProtocolId | 0 | 0 | The protocol ID field for the CCRM cells. Must be different from the BCM protocol ID. Default is 6. |
1.3.6.1.4.1.277.1.7.2.1.120 | cardNrtsBcmProtocolId | 0 | 0 | The protocol ID field for the BCM cells. Must be different from the CCRM protocol ID. Default is 5. |
1.3.6.1.4.1.277.1.7.2.1.121 | cardNrtsRmGenInterval | 0 | 0 | The RM cell generation interval in ms. Minimum is 30, maximum is 250, default is 100. |
1.3.6.1.4.1.277.1.7.2.1.122 | cardNrtsIdleCktThresh | 0 | 0 | The number of RM cell generation intervals with no cell reception upon which the circuit is declared idle. Minimum is 1, maximum … |
1.3.6.1.4.1.277.1.7.2.1.123 | cardNrtsVbrNrtManage | 0 | 0 | Indicates whether VBR NRT traffic should be managed by the NRTS processor. |
1.3.6.1.4.1.277.1.7.2.1.124 | cardNrtsIcrFact | 0 | 0 | A factor used to calculate the Initial Cell Rate for a circuit from its MCR and PCR. |
1.3.6.1.4.1.277.1.7.2.1.125 | cardNrtsMcastDiscardThresh | 0 | 0 | A NRTS discard threshold for the multicast circuits. |
1.3.6.1.4.1.277.1.7.2.1.126 | cardNrtsMcastDiscardCount | 0 | 0 | A NRTS discard counter for the multicast circuits. |
1.3.6.1.4.1.277.1.7.2.1.127 | cardAdminIOAType | 0 | 0 | The type of IOA attached to this card viewed from NMS. |
1.3.6.1.4.1.277.1.7.2.1.128 | cardNrtsMcastRate | 0 | 0 | The NRTS shaping rate for multicast circuits as a fraction of the line rate. |
1.3.6.1.4.1.277.1.7.2.1.129 | cardMonStatus | 0 | 0 | None |
1.3.6.1.4.1.277.1.7.2.1.130 | cardImageSetA | 0 | 0 | The infomation of image SetA which contains 4 elements, such as Part#, Revision, Size and Description. The separator, between ele… |
1.3.6.1.4.1.277.1.7.2.1.131 | cardImageSetB | 0 | 0 | The same DESCRIPTION as cardImageSetA but image SetB. |
1.3.6.1.4.1.277.1.7.2.1.132 | cardMacAddress | 0 | 0 | ethernet MAC address of the card if there is an ethernet interface. Currently only CP cards may have ethernet. Cards without ethe… |
1.3.6.1.4.1.277.1.7.2.1.133 | cardFlashRev | 0 | 0 | The boot flash rev number. |
1.3.6.1.4.1.277.1.7.2.1.134 | cardRequiredCapabilityBitmask | 0 | 0 | Bitmask indicating this cards' required capabilities based on configured features. A bit is set to one if the corresponding capa… |
1.3.6.1.4.1.277.1.7.2.1.135 | cardOperCapabilityBitmask | 0 | 0 | Bitmask indicating this cards' actual capabilities. A bit is set to one if the corresponding capability is supported. This variab… |
1.3.6.1.4.1.277.1.7.2.1.136 | cardDslModule | 0 | 0 | This is for Dynamic Software Loadl You can type: ModuleName Version, ModuleName Version, ... to load modules. |
1.3.6.1.4.1.277.1.7.2.1.137 | cardIPTableSize | 0 | 0 | The maximum number of IP routing table entries supported by the card. If set to 0, routing table size is assumed unlimited. |
1.3.6.1.4.1.277.1.7.2.1.139 | cardATMTcaInBufOverflowAlertPeriod | 0 | 0 | The atm tca ingress buffer overflow alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.140 | cardATMTcaInBufOverflowThresh | 0 | 0 | The atm tca ingress buffer overflow threshold. |
1.3.6.1.4.1.277.1.7.2.1.141 | cardATMTcaInInvalidVpiVciAlertPeriod | 0 | 0 | The atm tca ingress invalid vpi/vci alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.142 | cardATMTcaInInvalidVpiVciThresh | 0 | 0 | The atm tca ingress invalid vpi/vci threshold. |
1.3.6.1.4.1.277.1.7.2.1.143 | cardATMTcaInATMDCFullAlertPeriod | 0 | 0 | The atm tca ingress ATM DC full alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.144 | cardATMTcaInATMDCFullThresh | 0 | 0 | The atm tca ingress ATM DC full threshold. |
1.3.6.1.4.1.277.1.7.2.1.145 | cardATMTcaEnable | 0 | 0 | The atm tca enable/disable. |
1.3.6.1.4.1.277.1.7.2.1.146 | cardATMTcaId | 0 | 0 | This object identifies the the most recently declared card ATM threshold crossing alert |
1.3.6.1.4.1.277.1.7.2.1.147 | cardATMTcaECidLookupFailureAlertPeriod | 0 | 0 | The atm tca ingress buffer overflow alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.148 | cardATMTcaECidLookupThresh | 0 | 0 | The atm tca ingress buffer overflow threshold. |
1.3.6.1.4.1.277.1.7.2.1.149 | cardATMTcaSPPearlOCbrFailureAlertPeriod | 0 | 0 | The atm tca sp pearl overflow CBR alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.150 | cardATMTcaSPPearlOCbrThresh | 0 | 0 | The atm tca sp pearl overflow CBR threshold. |
1.3.6.1.4.1.277.1.7.2.1.151 | cardATMTcaSPPearlOAbrFailureAlertPeriod | 0 | 0 | The atm tca sp pearl overflow ABR alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.152 | cardATMTcaSPPearlOAbrThresh | 0 | 0 | The atm tca sp pearl overflow ABR threshold. |
1.3.6.1.4.1.277.1.7.2.1.153 | cardATMTcaSPPearlOVbr1FailureAlertPeriod | 0 | 0 | The atm tca sp pearl overflow VBR1 alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.154 | cardATMTcaSPPearlOVbr1Thresh | 0 | 0 | The atm tca sp pearl overflow VBR1 threshold. |
1.3.6.1.4.1.277.1.7.2.1.155 | cardATMTcaSPPearlOVbr2FailureAlertPeriod | 0 | 0 | The atm tca sp pearl overflow VBR2 alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.156 | cardATMTcaSPPearlOVbr2Thresh | 0 | 0 | The atm tca sp pearl overflow VBR2 threshold. |
1.3.6.1.4.1.277.1.7.2.1.157 | cardATMTcaSPPearlGCbrFailureAlertPeriod | 0 | 0 | The atm tca sp pearl congestion CBR alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.158 | cardATMTcaSPPearlGCbrThresh | 0 | 0 | The atm tca sp pearl congestion CBR threshold. |
1.3.6.1.4.1.277.1.7.2.1.159 | cardATMTcaSPPearlGAbrFailureAlertPeriod | 0 | 0 | The atm tca sp pearl congestion ABR alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.160 | cardATMTcaSPPearlGAbrThresh | 0 | 0 | The atm tca sp pearl congestion ABR threshold. |
1.3.6.1.4.1.277.1.7.2.1.161 | cardATMTcaSPPearlGVbr1FailureAlertPeriod | 0 | 0 | The atm tca sp pearl congestion VBR1 alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.162 | cardATMTcaSPPearlGVbr1Thresh | 0 | 0 | The atm tca sp pearl congestion VBR1 threshold. |
1.3.6.1.4.1.277.1.7.2.1.163 | cardATMTcaSPPearlGVbr2FailureAlertPeriod | 0 | 0 | The atm tca sp pearl congestion VBR2 alert period (in min). |
1.3.6.1.4.1.277.1.7.2.1.164 | cardATMTcaSPPearlGVbr2Thresh | 0 | 0 | The atm tca sp pearl congestion VBR2 threshold. |
1.3.6.1.4.1.277.1.7.2.1.165 | cardATMTcaSPEnable | 0 | 0 | The atm tca SP enable/disable. |
1.3.6.1.4.1.277.1.7.2.1.166 | cardSPEFCIEnable | 0 | 0 | The atm EFCI marking enable/disable. |
1.3.6.1.4.1.277.1.7.2.1.167 | cardSPClpEnable | 0 | 0 | The atm CLP-1 enable/disable. |
1.3.6.1.4.1.277.1.7.2.1.168 | spATMTcaId | 0 | 0 | This object identifies the the most recently declared sp ATM threshold crossing alert and first byte is used to indicate the swit… |
1.3.6.1.4.1.277.1.7.2.1.169 | cardSubcardToRedundant | 0 | 0 | Commands the card to initiate an immediate protection switch on the identified subcard that it controls. This causes control to b… |
1.3.6.1.4.1.277.1.7.2.1.170 | cardMemory5Usage | 0 | 0 | The bank5 memory utilization, in terms of free bytes, for CP Oynx card only. |
1.3.6.1.4.1.277.1.7.2.1.171 | cardSF1OperStatus | 0 | 0 | The current status of Switch Fabric 1 (GX550). |
1.3.6.1.4.1.277.1.7.2.1.172 | cardSF2OperStatus | 0 | 0 | The current status of Switch Fabric 2 (GX550). |
1.3.6.1.4.1.277.1.7.2.1.173 | cardTM1OperStatus | 0 | 0 | The current status of Timing Module 1 (GX550). |
1.3.6.1.4.1.277.1.7.2.1.174 | cardTM2OperStatus | 0 | 0 | The current status of Timing Module 2 (GX550). |
1.3.6.1.4.1.277.1.7.2.1.175 | cardMemStartLog | 0 | 0 | None |
1.3.6.1.4.1.277.1.7.2.1.176 | cardMemLogLevel | 0 | 0 | Set the Memory log level. Default 6 |
1.3.6.1.4.1.277.1.7.2.1.177 | cardMemClrLog | 0 | 0 | None |
1.3.6.1.4.1.277.1.7.2.1.178 | cardValidSubcards | 0 | 0 | The number of manageable subcards physically present in this card. |
1.3.6.1.4.1.277.1.7.2.1.179 | cardClp0CbrThreshold | 0 | 0 | The CLP 0 threshold for CBR queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until que… |
1.3.6.1.4.1.277.1.7.2.1.180 | cardClp01CbrThreshold | 0 | 0 | The maximum length of CBR queues in the card. Once queue length reaches this threshold, all cells are discarded until queue lengt… |
1.3.6.1.4.1.277.1.7.2.1.181 | cardClp0VbrRtThreshold | 0 | 0 | The CLP 0 threshold for VBR RT queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until … |
1.3.6.1.4.1.277.1.7.2.1.182 | cardClp01VbrRtThreshold | 0 | 0 | The maximum length of VBR-RT queues in the card. Once queue length reaches this threshold, all cells are discarded until queue le… |
1.3.6.1.4.1.277.1.7.2.1.183 | cardClp0VbrNrtThreshold | 0 | 0 | The CLP 0 threshold for VBR NRT queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until… |
1.3.6.1.4.1.277.1.7.2.1.184 | cardClp01VbrNrtThreshold | 0 | 0 | The maximum length of VBR-NRT queues in the card. Once queue length reaches this threshold, all cells are discarded until queue l… |
1.3.6.1.4.1.277.1.7.2.1.185 | cardClp0UAbrThreshold | 0 | 0 | The CLP 0 threshold for ABR/UBR queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until… |
1.3.6.1.4.1.277.1.7.2.1.186 | cardClp01UAbrThreshold | 0 | 0 | The maximum length of UBR/ABR queues in the card. Once queue length reaches this threshold, all cells are discarded until queue l… |
1.3.6.1.4.1.277.1.7.2.1.187 | cardControlMessagesFromBus | 0 | 0 | The number of complete control Messages received over the Cell Bus for this card. |
1.3.6.1.4.1.277.1.7.2.1.188 | cardControlMessagesToBus | 0 | 0 | The number of complete control Messages transmitted by this card over the Cell Bus. |
... |