This variable represents the desired loopback
configuration of the DS3 interface.
The values mean:
ds3NoLoop
Not in the loopback state. A device that is
not capable of performing a loopback on
the interface shall always return this as
its value.
ds3PayloadLoop
The received signal at this interface is looped
through the device. Typically the received signal
is looped back for retransmission after it has
passed through the device's framing function.
ds3LineLoop
The received signal at this interface does not
go through the device (minimum penetration) but
is looped back out.
ds3OtherLoop
Loopbacks that are not defined here.
ds3InwardLoop
The sent signal at this interface is looped back
through the device.
Parsed from file pport_ds3.mib.txt
Company: None
Module: APPIAN-PPORT-DS3-MIB
This variable represents the desired loopback
configuration of the DS3 interface.
The values mean:
ds3NoLoop
Not in the loopback state. A device that is
not capable of performing a loopback on
the interface shall always return this as
its value.
ds3PayloadLoop
The received signal at this interface is looped
through the device. Typically the received signal
is looped back for retransmission after it has
passed through the device's framing function.
ds3LineLoop
The received signal at this interface does not
go through the device (minimum penetration) but
is looped back out.
ds3OtherLoop
Loopbacks that are not defined here.
ds3InwardLoop
The sent signal at this interface is looped back
through the device.
Parsed from file APPIAN-PPORT-DS3-MIB.mib
Module: APPIAN-PPORT-DS3-MIB
Vendor: Tecnopro SA
Module: APPIAN-PPORT-DS3-MIB
[Automatically extracted from oidview.com]
acDs3ConfigLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { ds3NoLoop(1), ds3PayloadLoop(2), ds3LineLoop(3), ds3OtherLoop(4), ds3InwardLoop(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds3PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds3LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds3OtherLoop Loopbacks that are not defined here. ds3InwardLoop The sent signal at this interface is looped back through the device." DEFVAL { ds3NoLoop } ::= { acDs3ConfigEntry 19 }
acDs3ConfigLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { ds3NoLoop(1), ds3PayloadLoop(2), ds3LineLoop(3), ds3OtherLoop(4), ds3InwardLoop(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds3PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds3LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds3OtherLoop Loopbacks that are not defined here. ds3InwardLoop The sent signal at this interface is looped back through the device." DEFVAL { ds3NoLoop } ::= { acDs3ConfigEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2785.2.3.5.1.1.1 | acDs3ConfigNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.2 | acDs3ConfigSlot | 0 | 0 | The physical slot number for the port. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.3 | acDs3ConfigPort | 0 | 0 | The physical port number for the port. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.4 | acDs3ConfigAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Ref… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.5 | acDs3ConfigOpStatus | 0 | 0 | The operational or actual state of this DS3. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.6 | acDs3ConfigType | 0 | 0 | The field defines the type of DS3 port that this instance configures. The type can be either Access or Network. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.7 | acDs3ConfigTimeElapsedInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reas… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.8 | acDs3ConfigValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.9 | acDs3ConfigTimeElapsedDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some … |
| 1.3.6.1.4.1.2785.2.3.5.1.1.10 | acDs3ConfigValidDays | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.11 | acDs3ConfigTimeElapsedFarEndInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.12 | acDs3ConfigValidFarEndIntervals | 0 | 0 | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought onl… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.13 | acDs3ConfigTimeElapsedFarEndDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some r… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.14 | acDs3ConfigValidFarEndDays | 0 | 0 | The number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online w… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.15 | acDs3ConfigLineType | 0 | 0 | This variable indicates the variety of DS3 C-bit application implementing this interface. The type of interface affects the inter… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.16 | acDs3ConfigLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.17 | acDs3ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the … |
| 1.3.6.1.4.1.2785.2.3.5.1.1.18 | acDs3ConfigCircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.20 | acDs3ConfigLineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. … |
| 1.3.6.1.4.1.2785.2.3.5.1.1.21 | acDs3ConfigTransmitClockSource | 0 | 0 | The source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming ind… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.22 | acDs3ConfigInvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to acDs3ConfigValidIntervals for which no data is available. This object will typica… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.23 | acDs3ConfigInvalidDays | 0 | 0 | The number of days in the range from 0 to acDs3ConfigValidDays for which no data is available. This object will typically be zer… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.24 | acDs3ConfigInvalidFarEndIntervals | 0 | 0 | The number of intervals in the range from 0 to acDs3ConfigValidFarEndIntervals for which no data is available. This object will … |
| 1.3.6.1.4.1.2785.2.3.5.1.1.25 | acDs3ConfigInvalidFarEndDays | 0 | 0 | The number of days in the range from 0 to acDs3ConfigValidFarEndDays for which no data is available. This object will typically … |
| 1.3.6.1.4.1.2785.2.3.5.1.1.26 | acDs3ConfigLineLength | 0 | 0 | The length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use thi… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.27 | acDs3ConfigLineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was ente… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.28 | acDs3ConfigLineStatusChangeTrapEnable | 0 | 0 | Indicates whether acDs3ConfigLineStatusChange traps should be generated for this interface. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.29 | acDs3ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.30 | acDs3ConfigChannelization | 0 | 0 | Indicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized … |
| 1.3.6.1.4.1.2785.2.3.5.1.1.31 | acDs3ConfigDs1ForRemoteLoop | 0 | 0 | Indicates which ds1/e1 on this ds3/e3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be lo… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.32 | acDs3ConfigFarEndEquipCode | 0 | 0 | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Iden… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.33 | acDs3ConfigFarEndLocationIDCode | 0 | 0 | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Pa… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.34 | acDs3ConfigFarEndFrameIDCode | 0 | 0 | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given locatio… |
| 1.3.6.1.4.1.2785.2.3.5.1.1.35 | acDs3ConfigFarEndUnitCode | 0 | 0 | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message … |
| 1.3.6.1.4.1.2785.2.3.5.1.1.36 | acDs3ConfigFarEndFacilityIDCode | 0 | 0 | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote end. |
| 1.3.6.1.4.1.2785.2.3.5.1.1.37 | acDs3ConfigInterfaceName | 0 | 0 | A user configurable interface name which uniquely identifies this physical interface. The name can be up to 64 bytes in length. |