The field defines the type of DS3 port that this instance
configures. The type can be either Access or Network.
Parsed from file pport_ds3.mib.txt
Company: None
Module: APPIAN-PPORT-DS3-MIB
The field defines the type of DS3 port that this instance
configures. The type can be either Access or Network.
Parsed from file APPIAN-PPORT-DS3-MIB.mib
Module: APPIAN-PPORT-DS3-MIB
Vendor: Tecnopro SA
Module: APPIAN-PPORT-DS3-MIB
[Automatically extracted from oidview.com]
acDs3ConfigType OBJECT-TYPE SYNTAX INTEGER { ds3Access(1), ds3Network(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The field defines the type of DS3 port that this instance configures. The type can be either Access or Network." ::= { acDs3ConfigEntry 6 }
acDs3ConfigType OBJECT-TYPE SYNTAX INTEGER { ds3Access(1), ds3Network(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The field defines the type of DS3 port that this instance configures. The type can be either Access or Network." ::= { acDs3ConfigEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2785.2.3.5.1.1.1 | acDs3ConfigNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
1.3.6.1.4.1.2785.2.3.5.1.1.2 | acDs3ConfigSlot | 0 | 0 | The physical slot number for the port. |
1.3.6.1.4.1.2785.2.3.5.1.1.3 | acDs3ConfigPort | 0 | 0 | The physical port number for the port. |
1.3.6.1.4.1.2785.2.3.5.1.1.4 | acDs3ConfigAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Ref… |
1.3.6.1.4.1.2785.2.3.5.1.1.5 | acDs3ConfigOpStatus | 0 | 0 | The operational or actual state of this DS3. |
1.3.6.1.4.1.2785.2.3.5.1.1.7 | acDs3ConfigTimeElapsedInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reas… |
1.3.6.1.4.1.2785.2.3.5.1.1.8 | acDs3ConfigValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
1.3.6.1.4.1.2785.2.3.5.1.1.9 | acDs3ConfigTimeElapsedDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some … |
1.3.6.1.4.1.2785.2.3.5.1.1.10 | acDs3ConfigValidDays | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought on… |
1.3.6.1.4.1.2785.2.3.5.1.1.11 | acDs3ConfigTimeElapsedFarEndInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason… |
1.3.6.1.4.1.2785.2.3.5.1.1.12 | acDs3ConfigValidFarEndIntervals | 0 | 0 | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought onl… |
1.3.6.1.4.1.2785.2.3.5.1.1.13 | acDs3ConfigTimeElapsedFarEndDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some r… |
1.3.6.1.4.1.2785.2.3.5.1.1.14 | acDs3ConfigValidFarEndDays | 0 | 0 | The number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online w… |
1.3.6.1.4.1.2785.2.3.5.1.1.15 | acDs3ConfigLineType | 0 | 0 | This variable indicates the variety of DS3 C-bit application implementing this interface. The type of interface affects the inter… |
1.3.6.1.4.1.2785.2.3.5.1.1.16 | acDs3ConfigLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
1.3.6.1.4.1.2785.2.3.5.1.1.17 | acDs3ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the … |
1.3.6.1.4.1.2785.2.3.5.1.1.18 | acDs3ConfigCircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
1.3.6.1.4.1.2785.2.3.5.1.1.19 | acDs3ConfigLoopbackConfig | 0 | 0 | This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback st… |
1.3.6.1.4.1.2785.2.3.5.1.1.20 | acDs3ConfigLineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. … |
1.3.6.1.4.1.2785.2.3.5.1.1.21 | acDs3ConfigTransmitClockSource | 0 | 0 | The source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming ind… |
1.3.6.1.4.1.2785.2.3.5.1.1.22 | acDs3ConfigInvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to acDs3ConfigValidIntervals for which no data is available. This object will typica… |
1.3.6.1.4.1.2785.2.3.5.1.1.23 | acDs3ConfigInvalidDays | 0 | 0 | The number of days in the range from 0 to acDs3ConfigValidDays for which no data is available. This object will typically be zer… |
1.3.6.1.4.1.2785.2.3.5.1.1.24 | acDs3ConfigInvalidFarEndIntervals | 0 | 0 | The number of intervals in the range from 0 to acDs3ConfigValidFarEndIntervals for which no data is available. This object will … |
1.3.6.1.4.1.2785.2.3.5.1.1.25 | acDs3ConfigInvalidFarEndDays | 0 | 0 | The number of days in the range from 0 to acDs3ConfigValidFarEndDays for which no data is available. This object will typically … |
1.3.6.1.4.1.2785.2.3.5.1.1.26 | acDs3ConfigLineLength | 0 | 0 | The length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use thi… |
1.3.6.1.4.1.2785.2.3.5.1.1.27 | acDs3ConfigLineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was ente… |
1.3.6.1.4.1.2785.2.3.5.1.1.28 | acDs3ConfigLineStatusChangeTrapEnable | 0 | 0 | Indicates whether acDs3ConfigLineStatusChange traps should be generated for this interface. |
1.3.6.1.4.1.2785.2.3.5.1.1.29 | acDs3ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
1.3.6.1.4.1.2785.2.3.5.1.1.30 | acDs3ConfigChannelization | 0 | 0 | Indicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized … |
1.3.6.1.4.1.2785.2.3.5.1.1.31 | acDs3ConfigDs1ForRemoteLoop | 0 | 0 | Indicates which ds1/e1 on this ds3/e3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be lo… |
1.3.6.1.4.1.2785.2.3.5.1.1.32 | acDs3ConfigFarEndEquipCode | 0 | 0 | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Iden… |
1.3.6.1.4.1.2785.2.3.5.1.1.33 | acDs3ConfigFarEndLocationIDCode | 0 | 0 | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Pa… |
1.3.6.1.4.1.2785.2.3.5.1.1.34 | acDs3ConfigFarEndFrameIDCode | 0 | 0 | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given locatio… |
1.3.6.1.4.1.2785.2.3.5.1.1.35 | acDs3ConfigFarEndUnitCode | 0 | 0 | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message … |
1.3.6.1.4.1.2785.2.3.5.1.1.36 | acDs3ConfigFarEndFacilityIDCode | 0 | 0 | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote end. |
1.3.6.1.4.1.2785.2.3.5.1.1.37 | acDs3ConfigInterfaceName | 0 | 0 | A user configurable interface name which uniquely identifies this physical interface. The name can be up to 64 bytes in length. |