The state of the modules in the chassis.
This variable returns enabled(6) if any module in the chassis is
set to enabled(6). It returns disabled(7) when all modules, excluding the
INX-NMM, are set to disabled(7).
To reboot all modules in the chassis, including the INX-NMM, set
this variable to reset(1). Wait two minutes after changing boot
parameters for any module in the chassis before setting this
variable to reset(1). This ensures that your configuration updates
have been stored in NVRAM. You cannot set this variable to other(200).
Parsed from file Racal_INXNMM.mib.txt
Company: None
Module: INXNMM-MIB
The state of the modules in the chassis.
This variable returns enabled(6) if any module in the chassis is
set to enabled(6). It returns disabled(7) when all modules, excluding the
INX-NMM, are set to disabled(7).
To reboot all modules in the chassis, including the INX-NMM, set
this variable to reset(1). Wait two minutes after changing boot
parameters for any module in the chassis before setting this
variable to reset(1). This ensures that your configuration updates
have been stored in NVRAM. You cannot set this variable to other(200).
Parsed from file INXNMM-MIB.mib
Module: INXNMM-MIB
Vendor: Interlan
Module: INXNMM-MIB
[Automatically extracted from oidview.com]
riLdcChassisStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), enabled(6), disabled(7), other(200) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the modules in the chassis. This variable returns enabled(6) if any module in the chassis is set to enabled(6). It returns disabled(7) when all modules, excluding the INX-NMM, are set to disabled(7). To reboot all modules in the chassis, including the INX-NMM, set this variable to reset(1). Wait two minutes after changing boot parameters for any module in the chassis before setting this variable to reset(1). This ensures that your configuration updates have been stored in NVRAM. You cannot set this variable to other(200)." ::={ riLdcNmm 5 }
riLdcChassisStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), enabled(6), disabled(7), other(200) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the modules in the chassis. This variable returns enabled(6) if any module in the chassis is set to enabled(6). It returns disabled(7) when all modules, excluding the INX-NMM, are set to disabled(7). To reboot all modules in the chassis, including the INX-NMM, set this variable to reset(1). Wait two minutes after changing boot parameters for any module in the chassis before setting this variable to reset(1). This ensures that your configuration updates have been stored in NVRAM. You cannot set this variable to other(200)." ::={ riLdcNmm 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28.10.5.0 | riLdcChassisStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28.10.1 | riLdcHardwareRev | 1 | 1 | The hardware revision level of the INX-CMM, which this variable returns as a hexadecimal display string. Note: This is NOT the ha… |
| 1.3.6.1.4.1.28.10.2 | riLdcFirmwareRev | 1 | 1 | The firmware revision level of the INX-CMM, i.e., the revision level of the INX-CMM PROMs. Note: This is NOT the firmware revisio… |
| 1.3.6.1.4.1.28.10.3 | riLdcChassisSoftwareRev | 1 | 1 | The software revision level of higher-level INX-CMM software. Currently, there is no higher-level software on the INX-CMM; all i… |
| 1.3.6.1.4.1.28.10.4 | riLdcChassisSerialNumber | 1 | 1 | The logic module serial number of the INX-CMM. |
| 1.3.6.1.4.1.28.10.6 | riLdcChassisSlotCount | 1 | 1 | The total number of slots available in the chassis for INTERNExT modules. The INX5000-3 contains 3 slots, and the INX5000-12 con… |
| 1.3.6.1.4.1.28.10.7 | riLdcNumPowerSupplies | 1 | 1 | The number of power supplies that are installed in the INTERNExT chassis. This variable returns either 1 or 2, because the INX50… |
| 1.3.6.1.4.1.28.10.8 | riLdcNumBusMons | 1 | 1 | The number of entries in the Bus Monitor table, which contains statistics for the internal INTERNExT chassis buses. This variabl… |
| 1.3.6.1.4.1.28.10.9 | riLdcNumFans | 1 | 1 | The number of entries in the Fan Status table, which contains information about the chassis fans. This variable returns either 1… |
| 1.3.6.1.4.1.28.10.10 | riLdcChassisSlotTable | 1 | 23 | The Slot table contains information on the contents of each INTERNExT chassis slot. You cannot access this variable; it is only … |
| 1.3.6.1.4.1.28.10.11 | riLdcPowerSupplyTable | 1 | 3 | The Power Supply table contains information on the INTERNExT chassis power supplies. You cannot access this variable; it is only … |
| 1.3.6.1.4.1.28.10.12 | riLdcBusMonTable | 1 | 36 | The Bus Monitor table maintains traffic statistics on the internal buses of the INTERNExT chassis. You cannot access this variabl… |
| 1.3.6.1.4.1.28.10.13 | riLdcFanTable | 1 | 3 | The Fan Status table lists the status of all fans in the chassis. You cannot access this variable; it is only a table marker in t… |
| 1.3.6.1.4.1.28.10.14 | riHotFail | 19 | 57 | None |