An entry in the Port table (see the previous variable,
Port Table, for an explanation of this table).
You cannot access this variable; it is only a table marker in the
MIB. The following variables are entries in the Port Table:
Port Index
First Session Type
Current Session Type
Current Number of Sessions
Baud Rate for Received Data
Baud Rate for Transmitted Data
Port Parity
Data Bits Sent
Modem Control Type
Flow Control for Data Received
Flow Control for Data Sent
RS-232 Ring Indicator
Connection Password
Telnet Abort Out Character
Telnet Interrupt Character
Inactivity Timeout Value
Time Until Timer Expires
Suppress Software Messages
Port Function
Port State
Octets Rec'd
Octets Trans
XON Character
XOFF Character
Maximum Allowed Sessions
TCP Port Number
TCP Port Mode
Transparent Mode for the Port
Port Echo Setting
Domain Name Server IP Addr
Parsed from file Racal_INXNTS.mib.txt
Company: None
Module: INXNTS-MIB
An entry in the Port table (see the previous variable,
Port Table, for an explanation of this table).
You cannot access this variable; it is only a table marker in the
MIB. The following variables are entries in the Port Table:
Port Index
First Session Type
Current Session Type
Current Number of Sessions
Baud Rate for Received Data
Baud Rate for Transmitted Data
Port Parity
Data Bits Sent
Modem Control Type
Flow Control for Data Received
Flow Control for Data Sent
RS-232 Ring Indicator
Connection Password
Telnet Abort Out Character
Telnet Interrupt Character
Inactivity Timeout Value
Time Until Timer Expires
Suppress Software Messages
Port Function
Port State
Octets Rec'd
Octets Trans
XON Character
XOFF Character
Maximum Allowed Sessions
TCP Port Number
TCP Port Mode
Transparent Mode for the Port
Port Echo Setting
Domain Name Server IP Addr
Parsed from file INXNTS-MIB.mib
Module: INXNTS-MIB
Vendor: Interlan
Module: INXNTS-MIB
[Automatically extracted from oidview.com]
riTsPortEntry OBJECT-TYPE SYNTAX RiTsPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Port table (see the previous variable, Port Table, for an explanation of this table). You cannot access this variable; it is only a table marker in the MIB. The following variables are entries in the Port Table: Port Index First Session Type Current Session Type Current Number of Sessions Baud Rate for Received Data Baud Rate for Transmitted Data Port Parity Data Bits Sent Modem Control Type Flow Control for Data Received Flow Control for Data Sent RS-232 Ring Indicator Connection Password Telnet Abort Out Character Telnet Interrupt Character Inactivity Timeout Value Time Until Timer Expires Suppress Software Messages Port Function Port State Octets Rec'd Octets Trans XON Character XOFF Character Maximum Allowed Sessions TCP Port Number TCP Port Mode Transparent Mode for the Port Port Echo Setting Domain Name Server IP Addr" INDEX { riTsPortIndex } ::={ riTsPortTable 1 }
riTsPortEntry OBJECT-TYPE SYNTAX RiTsPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Port table (see the previous variable, Port Table, for an explanation of this table). You cannot access this variable; it is only a table marker in the MIB. The following variables are entries in the Port Table: Port Index First Session Type Current Session Type Current Number of Sessions Baud Rate for Received Data Baud Rate for Transmitted Data Port Parity Data Bits Sent Modem Control Type Flow Control for Data Received Flow Control for Data Sent RS-232 Ring Indicator Connection Password Telnet Abort Out Character Telnet Interrupt Character Inactivity Timeout Value Time Until Timer Expires Suppress Software Messages Port Function Port State Octets Rec'd Octets Trans XON Character XOFF Character Maximum Allowed Sessions TCP Port Number TCP Port Mode Transparent Mode for the Port Port Echo Setting Domain Name Server IP Addr" INDEX { riTsPortIndex } ::={ riTsPortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28.4.28.1.1 | riTsPortIndex | 0 | 0 | A unique value for each port. Because there are 16 ports on the INX-NTS, this variable always returns a value from 1 through 16. |
| 1.3.6.1.4.1.28.4.28.1.2 | riTsPortFirstType | 0 | 0 | The protocol used by the first session in the set of sessions for this port. For the INX-NTS, this variable returns telnet(4) fo… |
| 1.3.6.1.4.1.28.4.28.1.4 | riTsPortActiveType | 0 | 0 | The protocol that the currently active session is using to communicate with the other end of the connection. For the INX-NTS, th… |
| 1.3.6.1.4.1.28.4.28.1.6 | riTsPortNumSessions | 0 | 0 | The current number of sessions that are associated with this port. This number includes sessions for which there is no MIB entry … |
| 1.3.6.1.4.1.28.4.28.1.7 | riTsPortBaudIn | 0 | 0 | The baud rate for data received by the port, in bits per second (bps). If you want the INX-NTS to automatically determine baud ra… |
| 1.3.6.1.4.1.28.4.28.1.8 | riTsPortBaudOut | 0 | 0 | The baud rate for data transmitted by the port, in bits per second (bps). If you want the INX-NTS to automatically determine baud… |
| 1.3.6.1.4.1.28.4.28.1.9 | riTsPortParity | 0 | 0 | The parity of the port. Enter a value for parity that matches the parity setting of the device attached to the INX-NTS port. The… |
| 1.3.6.1.4.1.28.4.28.1.11 | riTsPortDataBits | 0 | 0 | The number of data bits in each character transmitted between the INX-NTS port and an attached device. Enter a value that matche… |
| 1.3.6.1.4.1.28.4.28.1.14 | riTsPortModemControl | 0 | 0 | The type of modem control, if any, on this port. This setting determines the use of the modem control RS-232 signals. Enter a va… |
| 1.3.6.1.4.1.28.4.28.1.15 | riTsPortFlowControlIn | 0 | 0 | The type of flow control used on the port for received data. o None(1) indicates that no flow control is in use o Xonxoff(2) indi… |
| 1.3.6.1.4.1.28.4.28.1.16 | riTsPortFlowControlOut | 0 | 0 | The type of flow control used on the port for data being sent. o None(1) indicates that no flow control is in use. o Xonxoff(2) i… |
| 1.3.6.1.4.1.28.4.28.1.17 | riTsPortRing | 0 | 0 | The status of the Ring Indicator (RI) RS-232 signal. If you have set modem control (see the Modem Control Type variable) to DCE, … |
| 1.3.6.1.4.1.28.4.28.1.18 | riTsPortPassword | 0 | 0 | The password needed to connect to the port. The port password can be up to seven characters long. |
| 1.3.6.1.4.1.28.4.28.1.19 | riTsPortAbortOut | 0 | 0 | The ASCII value of the character that invokes a Telnet Abort Output for this port. You use this character to suspend output to t… |
| 1.3.6.1.4.1.28.4.28.1.20 | riTsPortIntProc | 0 | 0 | The ASCII value of the character that invokes a Telnet Interrupt Process for this port. You use this character to kill a current … |
| 1.3.6.1.4.1.28.4.28.1.21 | riTsPortInactiveTimeOut | 0 | 0 | The number of minutes a port can be inactive before the INX-NTS closes all existing virtual circuits on that port. The timeout r… |
| 1.3.6.1.4.1.28.4.28.1.22 | riTsPortInactiveTimer | 0 | 0 | Number of minutes left before the inactivity timer (see the previous variable, Inactivity Timeout Value) expires, and all virtual… |
| 1.3.6.1.4.1.28.4.28.1.23 | riTsPortMachineInterface | 0 | 0 | Whether software-generated messages are passed through the port. To suppress the sending of all messages generated by the LAT/TC… |
| 1.3.6.1.4.1.28.4.28.1.25 | riTsPortFunction | 0 | 0 | The ability of the port to initiate and accept connections. o slave(1) indicates that the port can only accept connections. If it… |
| 1.3.6.1.4.1.28.4.28.1.26 | riTsPortState | 0 | 0 | The state of the port. o disabled(1) indicates that the port cannot be used o active(3) means the port is enabled, and a device i… |
| 1.3.6.1.4.1.28.4.28.1.27 | riTsPortOctetsIn | 0 | 0 | Total number of octets received on the port from the network connection(s). |
| 1.3.6.1.4.1.28.4.28.1.28 | riTsPortOctetsOut | 0 | 0 | Total number of octets sent onto the network connection(s) by the port. |
| 1.3.6.1.4.1.28.4.28.1.30 | riTsPortXONChar | 0 | 0 | The ASCII value of the XON character. This setting is meaningful only if XON/XOFF flow control is in use. (See the Flow Control… |
| 1.3.6.1.4.1.28.4.28.1.31 | riTsPortXOFFChar | 0 | 0 | The ASCII value of the XOFF character. This setting is meaningful only if XON/XOFF flow control is in use. (See the Flow Contro… |
| 1.3.6.1.4.1.28.4.28.1.32 | riTsPortMaxSess | 0 | 0 | Maximum number of sessions allowed on this port. |
| 1.3.6.1.4.1.28.4.28.1.33 | riTsPortServerPort | 0 | 0 | The TCP port number that this serial port uses when listening for Telnet connections. If this port is not configured to listen f… |
| 1.3.6.1.4.1.28.4.28.1.36 | riTsPortTCPMode | 0 | 0 | The TCP operating mode for the port. o rawsocket(1) means there is no application protocol; data is transferred to and from a TCP… |
| 1.3.6.1.4.1.28.4.28.1.37 | riTsPortDefXparent | 0 | 0 | The default mode of the port. When this variable is set to on(1), you make it possible to enable full eight-bit transparency so … |
| 1.3.6.1.4.1.28.4.28.1.38 | riTsPortDefEcho | 0 | 0 | The echo setting for the port. This echo setting determines whether echoing and such functions as line editing are done by the r… |