Whether software-generated messages are passed through
the port. To suppress the sending of all messages generated by the
LAT/TCP software, set this variable to yes(2). To enable the
sending of such messages, set it to no(1). Traffic from network
connections continues to pass through the port regardless of the
setting of this variable.
Parsed from file Racal_INXNTS.mib.txt
Company: None
Module: INXNTS-MIB
Whether software-generated messages are passed through
the port. To suppress the sending of all messages generated by the
LAT/TCP software, set this variable to yes(2). To enable the
sending of such messages, set it to no(1). Traffic from network
connections continues to pass through the port regardless of the
setting of this variable.
Parsed from file INXNTS-MIB.mib
Module: INXNTS-MIB
Vendor: Interlan
Module: INXNTS-MIB
[Automatically extracted from oidview.com]
riTsPortMachineInterface OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether software-generated messages are passed through the port. To suppress the sending of all messages generated by the LAT/TCP software, set this variable to yes(2). To enable the sending of such messages, set it to no(1). Traffic from network connections continues to pass through the port regardless of the setting of this variable." ::= { riTsPortEntry 23 }
riTsPortMachineInterface OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether software-generated messages are passed through the port. To suppress the sending of all messages generated by the LAT/TCP software, set this variable to yes(2). To enable the sending of such messages, set it to no(1). Traffic from network connections continues to pass through the port regardless of the setting of this variable." ::= { riTsPortEntry 23 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.28.4.28.1.1 | riTsPortIndex | 0 | 0 | A unique value for each port. Because there are 16 ports on the INX-NTS, this variable always returns a value from 1 through 16. |
1.3.6.1.4.1.28.4.28.1.2 | riTsPortFirstType | 0 | 0 | The protocol used by the first session in the set of sessions for this port. For the INX-NTS, this variable returns telnet(4) fo… |
1.3.6.1.4.1.28.4.28.1.4 | riTsPortActiveType | 0 | 0 | The protocol that the currently active session is using to communicate with the other end of the connection. For the INX-NTS, th… |
1.3.6.1.4.1.28.4.28.1.6 | riTsPortNumSessions | 0 | 0 | The current number of sessions that are associated with this port. This number includes sessions for which there is no MIB entry … |
1.3.6.1.4.1.28.4.28.1.7 | riTsPortBaudIn | 0 | 0 | The baud rate for data received by the port, in bits per second (bps). If you want the INX-NTS to automatically determine baud ra… |
1.3.6.1.4.1.28.4.28.1.8 | riTsPortBaudOut | 0 | 0 | The baud rate for data transmitted by the port, in bits per second (bps). If you want the INX-NTS to automatically determine baud… |
1.3.6.1.4.1.28.4.28.1.9 | riTsPortParity | 0 | 0 | The parity of the port. Enter a value for parity that matches the parity setting of the device attached to the INX-NTS port. The… |
1.3.6.1.4.1.28.4.28.1.11 | riTsPortDataBits | 0 | 0 | The number of data bits in each character transmitted between the INX-NTS port and an attached device. Enter a value that matche… |
1.3.6.1.4.1.28.4.28.1.14 | riTsPortModemControl | 0 | 0 | The type of modem control, if any, on this port. This setting determines the use of the modem control RS-232 signals. Enter a va… |
1.3.6.1.4.1.28.4.28.1.15 | riTsPortFlowControlIn | 0 | 0 | The type of flow control used on the port for received data. o None(1) indicates that no flow control is in use o Xonxoff(2) indi… |
1.3.6.1.4.1.28.4.28.1.16 | riTsPortFlowControlOut | 0 | 0 | The type of flow control used on the port for data being sent. o None(1) indicates that no flow control is in use. o Xonxoff(2) i… |
1.3.6.1.4.1.28.4.28.1.17 | riTsPortRing | 0 | 0 | The status of the Ring Indicator (RI) RS-232 signal. If you have set modem control (see the Modem Control Type variable) to DCE, … |
1.3.6.1.4.1.28.4.28.1.18 | riTsPortPassword | 0 | 0 | The password needed to connect to the port. The port password can be up to seven characters long. |
1.3.6.1.4.1.28.4.28.1.19 | riTsPortAbortOut | 0 | 0 | The ASCII value of the character that invokes a Telnet Abort Output for this port. You use this character to suspend output to t… |
1.3.6.1.4.1.28.4.28.1.20 | riTsPortIntProc | 0 | 0 | The ASCII value of the character that invokes a Telnet Interrupt Process for this port. You use this character to kill a current … |
1.3.6.1.4.1.28.4.28.1.21 | riTsPortInactiveTimeOut | 0 | 0 | The number of minutes a port can be inactive before the INX-NTS closes all existing virtual circuits on that port. The timeout r… |
1.3.6.1.4.1.28.4.28.1.22 | riTsPortInactiveTimer | 0 | 0 | Number of minutes left before the inactivity timer (see the previous variable, Inactivity Timeout Value) expires, and all virtual… |
1.3.6.1.4.1.28.4.28.1.25 | riTsPortFunction | 0 | 0 | The ability of the port to initiate and accept connections. o slave(1) indicates that the port can only accept connections. If it… |
1.3.6.1.4.1.28.4.28.1.26 | riTsPortState | 0 | 0 | The state of the port. o disabled(1) indicates that the port cannot be used o active(3) means the port is enabled, and a device i… |
1.3.6.1.4.1.28.4.28.1.27 | riTsPortOctetsIn | 0 | 0 | Total number of octets received on the port from the network connection(s). |
1.3.6.1.4.1.28.4.28.1.28 | riTsPortOctetsOut | 0 | 0 | Total number of octets sent onto the network connection(s) by the port. |
1.3.6.1.4.1.28.4.28.1.30 | riTsPortXONChar | 0 | 0 | The ASCII value of the XON character. This setting is meaningful only if XON/XOFF flow control is in use. (See the Flow Control… |
1.3.6.1.4.1.28.4.28.1.31 | riTsPortXOFFChar | 0 | 0 | The ASCII value of the XOFF character. This setting is meaningful only if XON/XOFF flow control is in use. (See the Flow Contro… |
1.3.6.1.4.1.28.4.28.1.32 | riTsPortMaxSess | 0 | 0 | Maximum number of sessions allowed on this port. |
1.3.6.1.4.1.28.4.28.1.33 | riTsPortServerPort | 0 | 0 | The TCP port number that this serial port uses when listening for Telnet connections. If this port is not configured to listen f… |
1.3.6.1.4.1.28.4.28.1.36 | riTsPortTCPMode | 0 | 0 | The TCP operating mode for the port. o rawsocket(1) means there is no application protocol; data is transferred to and from a TCP… |
1.3.6.1.4.1.28.4.28.1.37 | riTsPortDefXparent | 0 | 0 | The default mode of the port. When this variable is set to on(1), you make it possible to enable full eight-bit transparency so … |
1.3.6.1.4.1.28.4.28.1.38 | riTsPortDefEcho | 0 | 0 | The echo setting for the port. This echo setting determines whether echoing and such functions as line editing are done by the r… |