Cutoff will cause the outbound relay selected to be set to its
alarm clear state, relative to the relay 'sense' setting. This
allows the customer to disable an alarm after it has been set
by some system event. Cutoff is a one shot event, which does not
inhibit future additional alarms on that relay from occuring.
Alarm Relays DO NOT automatically clear, and must be cleared
manually with this feature.
Parsed from file sonusAm.mib.txt
Company: None
Module: SONUS-ALARM-CONTACT-MIB
Cutoff will cause the outbound relay selected to be set to its
alarm clear state, relative to the relay 'sense' setting. This
allows the customer to disable an alarm after it has been set
by some system event. Cutoff is a one shot event, which does not
inhibit future additional alarms on that relay from occuring.
Alarm Relays DO NOT automatically clear, and must be cleared
manually with this feature.
Parsed from file SONUS-ALARM-CONTACT-MIB.mib
Module: SONUS-ALARM-CONTACT-MIB
Vendor: Sonus Networks, Inc.
Module: SONUS-ALARM-CONTACT-MIB
[Automatically extracted from oidview.com]
sonusAlarmOutAdmnCutoff OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Cutoff will cause the outbound relay selected to be set to its alarm clear state, relative to the relay 'sense' setting. This allows the customer to disable an alarm after it has been set by some system event. Cutoff is a one shot event, which does not inhibit future additional alarms on that relay from occuring. Alarm Relays DO NOT automatically clear, and must be cleared manually with this feature." DEFVAL { false } ::= { sonusAlarmOutAdmnEntry 7 }
sonusAlarmOutAdmnCutoff OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Cutoff will cause the outbound relay selected to be set to its alarm clear state, relative to the relay 'sense' setting. This allows the customer to disable an alarm after it has been set by some system event. Cutoff is a one shot event, which does not inhibit future additional alarms on that relay from occuring. Alarm Relays DO NOT automatically clear, and must be cleared manually with this feature." DEFVAL { false } ::= { sonusAlarmOutAdmnEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2879.2.1.6.1.1.1.1 | sonusAlarmOutAdmnShelfIndex | 0 | 0 | Identifies the target shelf within the node. |
1.3.6.1.4.1.2879.2.1.6.1.1.1.2 | sonusAlarmOutAdmnRelayIndex | 0 | 0 | Identifies the target outbound relay within the shelf. |
1.3.6.1.4.1.2879.2.1.6.1.1.1.3 | sonusAlarmOutAdmnOperState | 0 | 0 | If enabled, the relay will respond to system events by opening and closing. If disabled, then it will be left in the default st… |
1.3.6.1.4.1.2879.2.1.6.1.1.1.4 | sonusAlarmOutAdmnValue | 0 | 0 | Default value for the relays, either ALARM or CLEAR. Alarm contact five can be manually reconfigured. Alarm Contacts 1 thru 4 ha… |
1.3.6.1.4.1.2879.2.1.6.1.1.1.5 | sonusAlarmOutAdmnSense | 0 | 0 | Select NORMAL if a CLOSED relay indicates an alarm condition. Select INVERTED if an OPEN relay indicates an alarm condition. |
1.3.6.1.4.1.2879.2.1.6.1.1.1.6 | sonusAlarmOutAdmnStartDelay | 0 | 0 | Start Delay will hold the outbound relays in reset for the time period(seconds) specified. This is intended to mitigate nuisance… |