Neighbor capabilities.
Parsed from file eosn.my.txt
Company: brocade
Module: EOSN-MIB
Vendor: Brocade
Module: EOSN-MIB (eosn.my)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
bbVfFspfPortNbrOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Neighbor capabilities." ::= { bbVfFspfPortEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.1 | bbVfFspfPortIndex | 0 | 0 | A number that uniquely identifies this port. It equals the port number + 1. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.2 | bbVfFspfPortCost | 0 | 0 | The cost of sending a frame over the ISL connected to this port. The value 1000 indicates a 1 Gb/s link. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.3 | bbVfFspfPortDelay | 0 | 0 | The delay incurred by a frame transmitted on this ISL. A value required by FSPF to be added to LSR's which are flooded. It's val… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.4 | bbVfFspfPortLastScnTime | 0 | 0 | The time the last State Change Notification (RSCN) was received to this interface. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.5 | bbVfFspfPortLastScn | 0 | 0 | The type of the last State Change Notification (RSCN) received on this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.6 | bbVfFspfPortLastUpTime | 0 | 0 | The last time this port came up. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.7 | bbVfFspfPortLastDownTime | 0 | 0 | The last time this port went down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.8 | bbVfFspfPortDownReason | 0 | 0 | The type of State Change Notification (RSCN) that caused the port to go down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.9 | bbVfFspfPortIfState | 0 | 0 | The current physical state of this port. A port in the down(2) state cannot be used to route traffic to other switches. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.10 | bbVfFspfPortNbrState | 0 | 0 | The current state of this port relating to its neighbor. This E_Port is used to route traffic to other switches only if the state… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.12 | bbVfFspfPortNbrId | 0 | 0 | The domain ID of the adjacent neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.13 | bbVfFspfPortRemPort | 0 | 0 | The port number of the remote switch connected to this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.14 | bbVfFspfPortNFlags | 0 | 0 | The internal FSPF flags. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.15 | bbVfFspfPortInactTimeout | 0 | 0 | The inactivity time out value. When this time out expires, the adjacency with the neighbor switch is broken and the new paths are… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.16 | bbVfFspfPortHelloTimeout | 0 | 0 | The hello time out value. When this time out expires, a hello frame is sent to the neighbor switch through this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.17 | bbVfFspfPortRxmtTimeout | 0 | 0 | The retransmission time out value. It is used to transmit topology information to the neighbor switch. If no acknowledgement is … |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.18 | bbVfFspfPortUpCount | 0 | 0 | The number of times this port came Up with respect to FSPF. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.19 | bbVfFspfPortDownCount | 0 | 0 | The number of times this port went down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.20 | bbVfFspfPortNbrInitCount | 0 | 0 | The number of times this neighbor was initialized, without the interface going down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.21 | bbVfFspfPortCmdAcceptCount | 0 | 0 | The total number of commands accepted from the neighbor switch. Number include Hellos, Link State Updates, and Link State acknowl… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.22 | bbVfFspfPortInvCmdCount | 0 | 0 | The number of invalid commands received from the neighbor switch. Usually commands with an FSPF version number higher than the o… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.23 | bbVfFspfPortHelloInCount | 0 | 0 | The number of Hello frames received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.24 | bbVfFspfPortInvHelloCount | 0 | 0 | The number of invalid hello frames (with invalid parameters) received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.25 | bbVfFspfPortLsuInCount | 0 | 0 | The number of LSUs received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.26 | bbVfFspfPortLsaInCount | 0 | 0 | The number of LSAs received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.27 | bbVfFspfPortHelloOutCount | 0 | 0 | The number of Hello frames transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.28 | bbVfFspfPortAttemptHelloOutCount | 0 | 0 | The number of attempted transmissions of Hello frames to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.29 | bbVfFspfPortAttemptLsuOutCount | 0 | 0 | The number of attempted transmissions of LSUs to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.30 | bbVfFspfPortLsuOutCount | 0 | 0 | The number of LSUs transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.31 | bbVfFspfPortLsaOutCount | 0 | 0 | The number of LSAs transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.32 | bbVfFspfPortAttemptLsaOutCount | 0 | 0 | The number of attempted transmissions of LSAs to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.33 | bbVfFspfPortCommand | 0 | 0 | This object is used to issue an FSPF port command. Setting it to 'none' has no effect, and when it is retrieved the value will al… |