Vendor: Brocade
Module: EOSN-TRAP-MIB (eosn-trap.my)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
bbNotifications OBJECT IDENTIFIER ::= { bbEvents 0 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.7.0.1 | bbFruRemoved | 0 | 0 | A Fru is removed or transitions to an Unknown Status. This trap applies to LIM, SWM, CTP, paddle, fantray and power unit. This tr… |
1.3.6.1.4.1.289.2.2.3.1.7.0.2 | bbFruInserted | 0 | 0 | A Fru has been inserted. This trap applies to LIM, SWM, CTP, paddle, fantray and power unit. This trap will be triggered if 1. a … |
1.3.6.1.4.1.289.2.2.3.1.7.0.3 | bbFruActive | 0 | 0 | A Fru transitions to an Active Status. This trap applies to LIM, SWM, CTP, paddle, fantray and power unit. This trap will be trig… |
1.3.6.1.4.1.289.2.2.3.1.7.0.5 | bbFruUpdateBusy | 0 | 0 | A Fru transitions to an update/busy Status. This trap will be triggered if the fru status becomes 'update-busy' |
1.3.6.1.4.1.289.2.2.3.1.7.0.6 | bbFruFailed | 0 | 0 | A Fru transitions to a Failed Status. This trap will be triggered if the fru status becomes 'failed' |
1.3.6.1.4.1.289.2.2.3.1.7.0.8 | bbBoardPoweredOff | 0 | 0 | The board is powered off. This trap applies to LIM/SWM/CTP. This trap will be triggered if a board is powered off. |
1.3.6.1.4.1.289.2.2.3.1.7.0.9 | bbCtpRoleStandAlone | 0 | 0 | The CTP is in Stand Alone state. This trap applies to CTP only. This trap is triggered if the standby CTP can not synchronize wit… |
1.3.6.1.4.1.289.2.2.3.1.7.0.10 | bbCtpRoleActive | 0 | 0 | The CTP is in an Active state. This trap applies to CTP only. This trap will be triggered if 1. the switch is restarted. 2. the sw… |
1.3.6.1.4.1.289.2.2.3.1.7.0.11 | bbCtpRoleStandbySyncing | 0 | 0 | The Standby CTP is still syncing up. This trap applies to CTP only. This trap is sent when 1. the standby CTP is restarted. 2. the… |
1.3.6.1.4.1.289.2.2.3.1.7.0.12 | bbCtpRoleStandbyReady | 0 | 0 | The CTP is in Standby Ready state & will take over if the Active CTP got switched. This trap applies to CTP only. This trap is se… |
1.3.6.1.4.1.289.2.2.3.1.7.0.13 | bbCtpRoleOutOfService | 0 | 0 | The CTP is in a out-of-service state & needs attention. This trap applies to CTP only. |
1.3.6.1.4.1.289.2.2.3.1.7.0.14 | bbNodeShutdown | 0 | 0 | The node has shut down. This trap is sent when the switch is shutting down. |
1.3.6.1.4.1.289.2.2.3.1.7.0.15 | bbNodeRestart | 0 | 0 | The node has restarted. This trap is sent when the switch is restarted. |
1.3.6.1.4.1.289.2.2.3.1.7.0.16 | bbSwitchOperational | 0 | 0 | The Switch is in an operational state. This trap is sent when one or more failed component is fix and the overall system health … |
1.3.6.1.4.1.289.2.2.3.1.7.0.17 | bbSwitchRedundantFailure | 0 | 0 | The Switch has some Redundant Resource Failure. This trap applies to CTP only. This trap is sent when the bbSysOperStatus is 'ope… |
1.3.6.1.4.1.289.2.2.3.1.7.0.18 | bbSwitchMinorfailure | 0 | 0 | The Switch has some minor failure. |
1.3.6.1.4.1.289.2.2.3.1.7.0.19 | bbSwitchMajorFailure | 0 | 0 | The Switch has some Major Failure. |
1.3.6.1.4.1.289.2.2.3.1.7.0.20 | bbSwitchNotOperational | 0 | 0 | The Switch has been taken out-of-Service. |
1.3.6.1.4.1.289.2.2.3.1.7.0.21 | bbLoginError | 0 | 0 | An operator has tried and failed to log into the system. |
1.3.6.1.4.1.289.2.2.3.1.7.0.22 | bbLoginOK | 0 | 0 | An operator has successfully logged into the system serial port or telnet session. |
1.3.6.1.4.1.289.2.2.3.1.7.0.23 | bbLogout | 0 | 0 | An operator has successfully logged off the system. |
1.3.6.1.4.1.289.2.2.3.1.7.0.24 | bbConfigChange | 0 | 0 | A configurable entity is changed. The description text specifies which object is changed and what's the new value. The format of… |
1.3.6.1.4.1.289.2.2.3.1.7.0.25 | bbTemperatureSensorFaulty | 0 | 0 | One of the board temperature sensor is faulty. |
1.3.6.1.4.1.289.2.2.3.1.7.0.26 | bbTemperatureSensorBelowMinimum | 0 | 0 | One of the board temperature sensor has fallen below the recommended level. |
1.3.6.1.4.1.289.2.2.3.1.7.0.27 | bbTemperatureSensorNominal | 0 | 0 | Board temperature sensor is at normal level |
1.3.6.1.4.1.289.2.2.3.1.7.0.28 | bbTemperatureSensorAboveMaximum | 0 | 0 | One of the board temperature sensor has risen above the recommended level. |
1.3.6.1.4.1.289.2.2.3.1.7.0.29 | bbPerfThresholdCrossingTrap | 0 | 0 | The current performance statistic is rising above or falling below the threshold. Once a rising threshold trap is sent, another … |
1.3.6.1.4.1.289.2.2.3.1.7.0.30 | bbPartitionEnabled | 0 | 0 | A partition has been enabled. This trap is sent to the admin partiton only. |
1.3.6.1.4.1.289.2.2.3.1.7.0.31 | bbPartitionDisabled | 0 | 0 | A partition has been disabled. This trap is sent to the admin partiton only. |
1.3.6.1.4.1.289.2.2.3.1.7.0.32 | bbPartitionSlotAssignmentChange | 0 | 0 | A slot has been assigned to a new partition. This trap is sent to the admin partition only. Besides this trap, two more traps wi… |
1.3.6.1.4.1.289.2.2.3.1.7.0.33 | bbPartitionSlotRemoved | 0 | 0 | A slot was removed from this partition. This trap is sent only to the partition where the slot has been removed. |
1.3.6.1.4.1.289.2.2.3.1.7.0.34 | bbPartitionSlotAdded | 0 | 0 | A slot was added to this partition. This trap is sent only to the partition where the slot has been added. |
1.3.6.1.4.1.289.2.2.3.1.7.0.35 | bbFabricReconfigurationStarted | 0 | 0 | The fabric has started reconfiguration. |
1.3.6.1.4.1.289.2.2.3.1.7.0.36 | bbFabricZoningChange | 0 | 0 | The fabric zoning has changed. This trap is sent when 1. A zoneset is activated. 2. A zoneset is disabled. 3. The active zoneset i… |
1.3.6.1.4.1.289.2.2.3.1.7.0.37 | bbSwitchDomainAssigned | 0 | 0 | A domain id has been assigned to the switch. |
1.3.6.1.4.1.289.2.2.3.1.7.0.38 | bbFcLinkBitAdded | 0 | 0 | The firmware detects that a new connection has been established on a port. |
1.3.6.1.4.1.289.2.2.3.1.7.0.39 | bbFcLinkBitErrorEvent | 0 | 0 | The bit error rate for a link exceeds an allowed threshold. |
1.3.6.1.4.1.289.2.2.3.1.7.0.40 | bbFcLinkNoSignalEvent | 0 | 0 | There is a loss of signal or sync. |
1.3.6.1.4.1.289.2.2.3.1.7.0.41 | bbFcLinkNOSEvent | 0 | 0 | A not operational primitive sequence is received. |
1.3.6.1.4.1.289.2.2.3.1.7.0.42 | bbFcLinkFailureEvent | 0 | 0 | A primitive sequence timeout occurred. |
1.3.6.1.4.1.289.2.2.3.1.7.0.43 | bbFcLinkInvalidEvent | 0 | 0 | A invalid primitive sequence is detected. |
1.3.6.1.4.1.289.2.2.3.1.7.0.44 | bbFcPortNoGbic | 0 | 0 | The Fibre Channel Port does not detect a GBIC. |
1.3.6.1.4.1.289.2.2.3.1.7.0.45 | bbFcPortOnline | 0 | 0 | The Fibre Channel Port status becomes 'online'. |
1.3.6.1.4.1.289.2.2.3.1.7.0.46 | bbFcPortOffline | 0 | 0 | The Fibre Channel Port status becomes 'offline'. |
1.3.6.1.4.1.289.2.2.3.1.7.0.47 | bbFcPortSegmented | 0 | 0 | The Fibre Channel Port (E-port) is segmented preventing the two fabrics to merge. |
1.3.6.1.4.1.289.2.2.3.1.7.0.48 | bbFcPortInvalidAttachment | 0 | 0 | The Fibre Channel Port is in a Invalid attachment state. This happens only when the port is linkup and has invalid attachment. F… |
1.3.6.1.4.1.289.2.2.3.1.7.0.49 | bbPortFailed | 0 | 0 | Port gets shutdown because of excessive errors. |
1.3.6.1.4.1.289.2.2.3.1.7.0.50 | bbEventLogNotification | 0 | 0 | This trap indicates that a new event log entry is added. |
1.3.6.1.4.1.289.2.2.3.1.7.0.51 | bbLinkIncidentLogNotification | 0 | 0 | This trap indicates that a new link incident log entry is added. |
1.3.6.1.4.1.289.2.2.3.1.7.0.52 | bbSystemErrorLedOn | 0 | 0 | The system error led is on. |
1.3.6.1.4.1.289.2.2.3.1.7.0.53 | bbSystemErrorLedOff | 0 | 0 | The system error led is off. |
1.3.6.1.4.1.289.2.2.3.1.7.0.54 | bbFruOfflineLedOn | 0 | 0 | The fru offline Led is on. |
1.3.6.1.4.1.289.2.2.3.1.7.0.55 | bbFruOfflineLedOff | 0 | 0 | The fru offline Led is off. |
1.3.6.1.4.1.289.2.2.3.1.7.0.56 | bbThroughputThresholdAlert | 0 | 0 | This trap is sent when a user configured throughtput threshold criteria has been met. |
1.3.6.1.4.1.289.2.2.3.1.7.0.57 | bbCounterThresholdAlert | 0 | 0 | This trap is sent when a user configured counter threshold criteria has been met. |
1.3.6.1.4.1.289.2.2.3.1.7.0.58 | bbConnUnitSnsInserted | 0 | 0 | This trap is sent when a new entry is added to connUnitSnsTable and the fc is enabled otherwise this trap is not sent. This trap … |
1.3.6.1.4.1.289.2.2.3.1.7.0.59 | bbConnUnitSnsDeleted | 0 | 0 | This trap is sent whenever an entry is deleted from connUnitSnsTable and the fc is enabled otherwise this trap is not sent. This … |
1.3.6.1.4.1.289.2.2.3.1.7.0.60 | bbFcPortNotPresent | 0 | 0 | This trap is sent when bbFcPortOperStatus becomes 'notPresent'. A port's operational state can become 'notPresent' if 1. the swit… |
1.3.6.1.4.1.289.2.2.3.1.7.0.61 | bbFcPortUnaddressable | 0 | 0 | This trap is sent when bbFcPortOperState becomes 'notAddressable'. A port operational state can become 'notAddressable' if the p… |
1.3.6.1.4.1.289.2.2.3.1.7.0.62 | bbFcPortInactive | 0 | 0 | The trap is sent when bbFcPortOperState becomes 'inactive'. |
1.3.6.1.4.1.289.2.2.3.1.7.0.63 | bbPortUp | 0 | 0 | this trap is sent when bbPortStatus becomes 'up'. This happens whenever the port status is transitioned to 'up' state from anoth… |
1.3.6.1.4.1.289.2.2.3.1.7.0.64 | bbPortDown | 0 | 0 | This trap is sent when bbPortState becomes 'down'. This happens when the port status is transitioned to 'down' state from anothe… |
1.3.6.1.4.1.289.2.2.3.1.7.0.65 | bbTopologyChange | 0 | 0 | Fabric Topology has changed. |
1.3.6.1.4.1.289.2.2.3.1.7.0.66 | bbPortOpticsNotPresent | 0 | 0 | Optics is not detected on this port. This trap is sent when the GBIC in a port is extracted. |
1.3.6.1.4.1.289.2.2.3.1.7.0.67 | bbRnidCreated | 0 | 0 | This trap is sent to indicate that a new RNID entry is created. In open mode, this happens during fabric initialization; in FICO… |
1.3.6.1.4.1.289.2.2.3.1.7.0.68 | bbRnidDeleted | 0 | 0 | This trap is sent to indicate that a RNID entry is deleted. This happens if an ISL is removed, or in FICON mode, a port is down … |
1.3.6.1.4.1.289.2.2.3.1.7.0.69 | bbFspfConnAdded | 0 | 0 | Topology change notification sent whenever a connection is added. |
1.3.6.1.4.1.289.2.2.3.1.7.0.70 | bbFspfConnDeleted | 0 | 0 | Topology change notification sent whenever a connection is deleted. |
1.3.6.1.4.1.289.2.2.3.1.7.0.71 | bbFcPortNoLight | 0 | 0 | The Fibre Channel Port status is noLight. |
1.3.6.1.4.1.289.2.2.3.1.7.0.72 | bbFcPortEPort | 0 | 0 | The trap is sent when bbFcPortOperType becomes 'ePort'. |
1.3.6.1.4.1.289.2.2.3.1.7.0.73 | bbFcPortFPort | 0 | 0 | The trap is sent when bbFcPortOperType becomes 'fPort'. |
1.3.6.1.4.1.289.2.2.3.1.7.0.74 | bbBoardBeaconingOn | 0 | 0 | A board beaconing is on |
1.3.6.1.4.1.289.2.2.3.1.7.0.75 | bbBoardBeaconingOff | 0 | 0 | A board beaconing is off |
1.3.6.1.4.1.289.2.2.3.1.7.0.76 | bbFcPortUnknownType | 0 | 0 | The trap is sent when bbFcPortOperType becomes 'unknown'. |
1.3.6.1.4.1.289.2.2.3.1.7.0.77 | bbPartitionConfigChange | 0 | 0 | A partion configurable entity is changed. The description text specifies which object is changed and what's the new value. The fo… |
1.3.6.1.4.1.289.2.2.3.1.7.0.78 | bbFabricSwitchedToHardZoning | 0 | 0 | Hard Zoning Enforcement has been re-enabled on this paddle. Hard Zoning Enforcement is enabled by default. |
1.3.6.1.4.1.289.2.2.3.1.7.0.79 | bbFabricSwitchedToSoftZoning | 0 | 0 | Hard Zoning Enforcement has been disabled on this paddle. Soft Zoning Enforcement now in effect. |
1.3.6.1.4.1.289.2.2.3.1.7.0.80 | bbFcTraceRouteCompleted | 0 | 0 | The Trap is sent whenever the fibre channel trace route request is completed & only if bbFcTraceRouteTrapEnable is set to true. |
1.3.6.1.4.1.289.2.2.3.1.7.0.81 | bbOpenTrunkingLogNotification | 0 | 0 | This trap indicates that a new open trunking log entry is added. |
1.3.6.1.4.1.289.2.2.3.1.7.0.82 | bbVfFspfConnAdded | 0 | 0 | VF Topology change notification sent whenever a connection is added. |
1.3.6.1.4.1.289.2.2.3.1.7.0.83 | bbVfFspfConnDeleted | 0 | 0 | VF Topology change notification sent whenever a connection is deleted. |
1.3.6.1.4.1.289.2.2.3.1.7.0.84 | bbSecurityLogNotification | 0 | 0 | This trap indicates that a new security log entry is added. |
1.3.6.1.4.1.289.2.2.3.1.7.0.85 | fcPingCompleted | 0 | 0 | The Trap is sent whenever the fibre channel ping request is completed & only if fcPingTrapEnable is set to true. |
1.3.6.1.4.1.289.2.2.3.1.7.0.86 | bbVirtualFabricStatusChange | 0 | 0 | The virtual fabric state has changed. The state is changed either triggered through bbVfRowStatus or by changing the state of t… |
1.3.6.1.4.1.289.2.2.3.1.7.0.87 | nmruConnectionStatusChange | 0 | 0 | The nmru connection state has changed. The state is changed either triggered when an application (EFCM server) connects or disc… |
1.3.6.1.4.1.289.2.2.3.1.7.0.88 | bbFcPortDisabled | 0 | 0 | The Fibre Channel Port status becomes 'disabled'. Port fencing feature puts the port to be in this state. |
1.3.6.1.4.1.289.2.2.3.1.7.0.89 | bbFabricReconfigurationCompleted | 0 | 0 | Fabric reconfiguration is completed. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.7.1 | bbLogs | 10 | 145 | None |
1.3.6.1.4.1.289.2.2.3.1.7.2 | bbNotifyInfo | 1 | 2 | None |