The Standby CTP is still syncing up.
This trap applies to CTP only. This trap is sent when
1. the standby CTP is restarted.
2. the switch is switched over.
3. the switch is failed over.i
Parsed from file eosn-trap.my.txt
Company: brocade
Module: EOSN-TRAP-MIB
bbCtpRoleStandbySyncing NOTIFICATION-TYPE OBJECTS { bbBoardSlotType, bbBoardSlotPosition, bbBoardFruCode, bbBoardFruPosition, bbTrapLogSeqNum, bbSysSwitchName, bbSysSwitchId } STATUS current DESCRIPTION "The Standby CTP is still syncing up. This trap applies to CTP only. This trap is sent when 1. the standby CTP is restarted. 2. the switch is switched over. 3. the switch is failed over.i" ::= { bbNotifications 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.289.2.2.3.1.7.0.1 | bbFruRemoved | 0 | 0 | A Fru is removed or transitions to an Unknown Status. This trap applies to LIM, SWM, CTP, paddle, fantray and power unit. This tr… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.2 | bbFruInserted | 0 | 0 | A Fru has been inserted. This trap applies to LIM, SWM, CTP, paddle, fantray and power unit. This trap will be triggered if 1. a … |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.3 | bbFruActive | 0 | 0 | A Fru transitions to an Active Status. This trap applies to LIM, SWM, CTP, paddle, fantray and power unit. This trap will be trig… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.5 | bbFruUpdateBusy | 0 | 0 | A Fru transitions to an update/busy Status. This trap will be triggered if the fru status becomes 'update-busy' |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.6 | bbFruFailed | 0 | 0 | A Fru transitions to a Failed Status. This trap will be triggered if the fru status becomes 'failed' |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.8 | bbBoardPoweredOff | 0 | 0 | The board is powered off. This trap applies to LIM/SWM/CTP. This trap will be triggered if a board is powered off. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.9 | bbCtpRoleStandAlone | 0 | 0 | The CTP is in Stand Alone state. This trap applies to CTP only. This trap is triggered if the standby CTP can not synchronize wit… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.10 | bbCtpRoleActive | 0 | 0 | The CTP is in an Active state. This trap applies to CTP only. This trap will be triggered if 1. the switch is restarted. 2. the sw… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.12 | bbCtpRoleStandbyReady | 0 | 0 | The CTP is in Standby Ready state & will take over if the Active CTP got switched. This trap applies to CTP only. This trap is se… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.13 | bbCtpRoleOutOfService | 0 | 0 | The CTP is in a out-of-service state & needs attention. This trap applies to CTP only. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.14 | bbNodeShutdown | 0 | 0 | The node has shut down. This trap is sent when the switch is shutting down. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.15 | bbNodeRestart | 0 | 0 | The node has restarted. This trap is sent when the switch is restarted. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.16 | bbSwitchOperational | 0 | 0 | The Switch is in an operational state. This trap is sent when one or more failed component is fix and the overall system health … |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.17 | bbSwitchRedundantFailure | 0 | 0 | The Switch has some Redundant Resource Failure. This trap applies to CTP only. This trap is sent when the bbSysOperStatus is 'ope… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.18 | bbSwitchMinorfailure | 0 | 0 | The Switch has some minor failure. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.19 | bbSwitchMajorFailure | 0 | 0 | The Switch has some Major Failure. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.20 | bbSwitchNotOperational | 0 | 0 | The Switch has been taken out-of-Service. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.21 | bbLoginError | 0 | 0 | An operator has tried and failed to log into the system. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.22 | bbLoginOK | 0 | 0 | An operator has successfully logged into the system serial port or telnet session. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.23 | bbLogout | 0 | 0 | An operator has successfully logged off the system. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.24 | bbConfigChange | 0 | 0 | A configurable entity is changed. The description text specifies which object is changed and what's the new value. The format of… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.25 | bbTemperatureSensorFaulty | 0 | 0 | One of the board temperature sensor is faulty. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.26 | bbTemperatureSensorBelowMinimum | 0 | 0 | One of the board temperature sensor has fallen below the recommended level. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.27 | bbTemperatureSensorNominal | 0 | 0 | Board temperature sensor is at normal level |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.28 | bbTemperatureSensorAboveMaximum | 0 | 0 | One of the board temperature sensor has risen above the recommended level. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.29 | bbPerfThresholdCrossingTrap | 0 | 0 | The current performance statistic is rising above or falling below the threshold. Once a rising threshold trap is sent, another … |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.30 | bbPartitionEnabled | 0 | 0 | A partition has been enabled. This trap is sent to the admin partiton only. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.31 | bbPartitionDisabled | 0 | 0 | A partition has been disabled. This trap is sent to the admin partiton only. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.32 | bbPartitionSlotAssignmentChange | 0 | 0 | A slot has been assigned to a new partition. This trap is sent to the admin partition only. Besides this trap, two more traps wi… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.33 | bbPartitionSlotRemoved | 0 | 0 | A slot was removed from this partition. This trap is sent only to the partition where the slot has been removed. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.34 | bbPartitionSlotAdded | 0 | 0 | A slot was added to this partition. This trap is sent only to the partition where the slot has been added. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.35 | bbFabricReconfigurationStarted | 0 | 0 | The fabric has started reconfiguration. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.36 | bbFabricZoningChange | 0 | 0 | The fabric zoning has changed. This trap is sent when 1. A zoneset is activated. 2. A zoneset is disabled. 3. The active zoneset i… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.37 | bbSwitchDomainAssigned | 0 | 0 | A domain id has been assigned to the switch. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.38 | bbFcLinkBitAdded | 0 | 0 | The firmware detects that a new connection has been established on a port. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.39 | bbFcLinkBitErrorEvent | 0 | 0 | The bit error rate for a link exceeds an allowed threshold. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.40 | bbFcLinkNoSignalEvent | 0 | 0 | There is a loss of signal or sync. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.41 | bbFcLinkNOSEvent | 0 | 0 | A not operational primitive sequence is received. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.42 | bbFcLinkFailureEvent | 0 | 0 | A primitive sequence timeout occurred. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.43 | bbFcLinkInvalidEvent | 0 | 0 | A invalid primitive sequence is detected. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.44 | bbFcPortNoGbic | 0 | 0 | The Fibre Channel Port does not detect a GBIC. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.45 | bbFcPortOnline | 0 | 0 | The Fibre Channel Port status becomes 'online'. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.46 | bbFcPortOffline | 0 | 0 | The Fibre Channel Port status becomes 'offline'. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.47 | bbFcPortSegmented | 0 | 0 | The Fibre Channel Port (E-port) is segmented preventing the two fabrics to merge. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.48 | bbFcPortInvalidAttachment | 0 | 0 | The Fibre Channel Port is in a Invalid attachment state. This happens only when the port is linkup and has invalid attachment. F… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.49 | bbPortFailed | 0 | 0 | Port gets shutdown because of excessive errors. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.50 | bbEventLogNotification | 0 | 0 | This trap indicates that a new event log entry is added. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.51 | bbLinkIncidentLogNotification | 0 | 0 | This trap indicates that a new link incident log entry is added. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.52 | bbSystemErrorLedOn | 0 | 0 | The system error led is on. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.53 | bbSystemErrorLedOff | 0 | 0 | The system error led is off. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.54 | bbFruOfflineLedOn | 0 | 0 | The fru offline Led is on. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.55 | bbFruOfflineLedOff | 0 | 0 | The fru offline Led is off. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.56 | bbThroughputThresholdAlert | 0 | 0 | This trap is sent when a user configured throughtput threshold criteria has been met. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.57 | bbCounterThresholdAlert | 0 | 0 | This trap is sent when a user configured counter threshold criteria has been met. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.58 | bbConnUnitSnsInserted | 0 | 0 | This trap is sent when a new entry is added to connUnitSnsTable and the fc is enabled otherwise this trap is not sent. This trap … |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.59 | bbConnUnitSnsDeleted | 0 | 0 | This trap is sent whenever an entry is deleted from connUnitSnsTable and the fc is enabled otherwise this trap is not sent. This … |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.60 | bbFcPortNotPresent | 0 | 0 | This trap is sent when bbFcPortOperStatus becomes 'notPresent'. A port's operational state can become 'notPresent' if 1. the swit… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.61 | bbFcPortUnaddressable | 0 | 0 | This trap is sent when bbFcPortOperState becomes 'notAddressable'. A port operational state can become 'notAddressable' if the p… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.62 | bbFcPortInactive | 0 | 0 | The trap is sent when bbFcPortOperState becomes 'inactive'. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.63 | bbPortUp | 0 | 0 | this trap is sent when bbPortStatus becomes 'up'. This happens whenever the port status is transitioned to 'up' state from anoth… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.64 | bbPortDown | 0 | 0 | This trap is sent when bbPortState becomes 'down'. This happens when the port status is transitioned to 'down' state from anothe… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.65 | bbTopologyChange | 0 | 0 | Fabric Topology has changed. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.66 | bbPortOpticsNotPresent | 0 | 0 | Optics is not detected on this port. This trap is sent when the GBIC in a port is extracted. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.67 | bbRnidCreated | 0 | 0 | This trap is sent to indicate that a new RNID entry is created. In open mode, this happens during fabric initialization; in FICO… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.68 | bbRnidDeleted | 0 | 0 | This trap is sent to indicate that a RNID entry is deleted. This happens if an ISL is removed, or in FICON mode, a port is down … |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.69 | bbFspfConnAdded | 0 | 0 | Topology change notification sent whenever a connection is added. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.70 | bbFspfConnDeleted | 0 | 0 | Topology change notification sent whenever a connection is deleted. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.71 | bbFcPortNoLight | 0 | 0 | The Fibre Channel Port status is noLight. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.72 | bbFcPortEPort | 0 | 0 | The trap is sent when bbFcPortOperType becomes 'ePort'. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.73 | bbFcPortFPort | 0 | 0 | The trap is sent when bbFcPortOperType becomes 'fPort'. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.74 | bbBoardBeaconingOn | 0 | 0 | A board beaconing is on |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.75 | bbBoardBeaconingOff | 0 | 0 | A board beaconing is off |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.76 | bbFcPortUnknownType | 0 | 0 | The trap is sent when bbFcPortOperType becomes 'unknown'. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.77 | bbPartitionConfigChange | 0 | 0 | A partion configurable entity is changed. The description text specifies which object is changed and what's the new value. The fo… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.78 | bbFabricSwitchedToHardZoning | 0 | 0 | Hard Zoning Enforcement has been re-enabled on this paddle. Hard Zoning Enforcement is enabled by default. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.79 | bbFabricSwitchedToSoftZoning | 0 | 0 | Hard Zoning Enforcement has been disabled on this paddle. Soft Zoning Enforcement now in effect. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.80 | bbFcTraceRouteCompleted | 0 | 0 | The Trap is sent whenever the fibre channel trace route request is completed & only if bbFcTraceRouteTrapEnable is set to true. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.81 | bbOpenTrunkingLogNotification | 0 | 0 | This trap indicates that a new open trunking log entry is added. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.82 | bbVfFspfConnAdded | 0 | 0 | VF Topology change notification sent whenever a connection is added. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.83 | bbVfFspfConnDeleted | 0 | 0 | VF Topology change notification sent whenever a connection is deleted. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.84 | bbSecurityLogNotification | 0 | 0 | This trap indicates that a new security log entry is added. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.85 | fcPingCompleted | 0 | 0 | The Trap is sent whenever the fibre channel ping request is completed & only if fcPingTrapEnable is set to true. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.86 | bbVirtualFabricStatusChange | 0 | 0 | The virtual fabric state has changed. The state is changed either triggered through bbVfRowStatus or by changing the state of t… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.87 | nmruConnectionStatusChange | 0 | 0 | The nmru connection state has changed. The state is changed either triggered when an application (EFCM server) connects or disc… |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.88 | bbFcPortDisabled | 0 | 0 | The Fibre Channel Port status becomes 'disabled'. Port fencing feature puts the port to be in this state. |
| 1.3.6.1.4.1.289.2.2.3.1.7.0.89 | bbFabricReconfigurationCompleted | 0 | 0 | Fabric reconfiguration is completed. |