This read-only variable displays which Spanning
Tree algorithm (IEEE 802.1, DEC-compatible) this
bridge is using. When this system boots up, it
uses IEEE 802.1. If it subsequently learns that
another system on the network is using DEC
compatible spanning tree algorithm, this system
will switch to DEC-compatible.
Parsed from file vitalink.txt
Company: None
Module: VITALINK-MIB
This read-only variable displays which Spanning
Tree algorithm (IEEE 802.1, DEC-compatible) this
bridge is using. When this system boots up, it
uses IEEE 802.1. If it subsequently learns that
another system on the network is using DEC
compatible spanning tree algorithm, this system
will switch to DEC-compatible.
Parsed from file VITALINK-MIB.mib
Module: VITALINK-MIB
Vendor: Vitalink Communications
Module: VITALINK-MIB
[Automatically extracted from oidview.com]
dot1dStpProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { other(1), decprotocol(2), ieee8021d(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This read-only variable displays which Spanning Tree algorithm (IEEE 802.1, DEC-compatible) this bridge is using. When this system boots up, it uses IEEE 802.1. If it subsequently learns that another system on the network is using DEC compatible spanning tree algorithm, this system will switch to DEC-compatible." ::= { bridgestp 1 }
dot1dStpProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { other(1), decprotocol(2), ieee8021d(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This read-only variable displays which Spanning Tree algorithm (IEEE 802.1, DEC-compatible) this bridge is using. When this system boots up, it uses IEEE 802.1. If it subsequently learns that another system on the network is using DEC compatible spanning tree algorithm, this system will switch to DEC-compatible." ::= { bridgestp 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.29.1.4.2.1.0 | dot1dStpProtocolSpecification | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.29.1.4.2.2 | vBridgeStpConvert802 | 1 | 1 | This is a read-only variable. It is normally used when the network is running in DEC compatible mode (see item 1 on screen 1/2).… |
1.3.6.1.4.1.29.1.4.2.3 | vBridgeStpInterdomain | 1 | 1 | This read-only variable specifies whether or not (true, false) this bridge is to function as an interdomain bridge. An interdoma… |
1.3.6.1.4.1.29.1.4.2.4 | vBridgeStpPriorityCode | 1 | 1 | This read-only variable specifies the root priority (or priority code) for this bridge. If this value is set to 0P3, it is interp… |
1.3.6.1.4.1.29.1.4.2.5 | dot1dStpPriority | 1 | 1 | This read-only variable displays the priority and address of this bridge. |
1.3.6.1.4.1.29.1.4.2.6 | vBridgeStpCostAlgorithm | 1 | 1 | This read-only variable specifies which costing algorithm (dec, ieee) is to be used by this bridge. |
1.3.6.1.4.1.29.1.4.2.7 | dot1dStpDesignatedRoot | 1 | 1 | This read-only variable displays the priority and address of the root bridge. The bridge with the lowest priority becomes the roo… |
1.3.6.1.4.1.29.1.4.2.8 | dot1dStpRootCost | 1 | 1 | This read-only variable displays the cost of the Inlink path to the root. |
1.3.6.1.4.1.29.1.4.2.9 | dot1dStpRootPort | 1 | 1 | This read-only variable displays the ID of the network group that creates the most direct, cost-effective path from this bridge t… |
1.3.6.1.4.1.29.1.4.2.10 | dot1dStpMaxAge | 1 | 1 | This read-only variable displays the amount of time a bridge will wait for a hello message before attempting to find a new inlink… |
1.3.6.1.4.1.29.1.4.2.11 | dot1dStpHelloTime | 1 | 1 | This read-only variable displays the frequency with which hello messages and network validation messages are transmitted over the… |
1.3.6.1.4.1.29.1.4.2.12 | dot1dStpHoldTime | 1 | 1 | Displays the amount of time a bridge will wait for a hello message before attempting to find a new inlink. This value is determin… |
1.3.6.1.4.1.29.1.4.2.13 | dot1dStpForwardDelay | 1 | 1 | This read-only variable displays the length of time a network group will remain in the pre- forwarding state. Determined by the r… |
1.3.6.1.4.1.29.1.4.2.14 | dot1dStpBridgeMaxAge | 1 | 1 | This read-write variable specifies the Listen interval to be used throughout the network if this bridge becomes the root. Range =… |
1.3.6.1.4.1.29.1.4.2.15 | dot1dStpBridgeHelloTime | 1 | 1 | This read-write variable specifies the Hello Interval to be used throughout the network if this bridge becomes the root. Range = … |
1.3.6.1.4.1.29.1.4.2.16 | dot1dStpBridgeForwardDelay | 1 | 1 | This read-write variable specifies the pre- forwarding interval to be used throughout the network if this bridge becomes the root… |
1.3.6.1.4.1.29.1.4.2.17 | dot1dStpTopChanges | 1 | 1 | Displays the number of times this network group has transitioned from the pre-forwarding to the forwarding state. |
1.3.6.1.4.1.29.1.4.2.18 | vStpGroupTable | 1 | 9 | None |