This read-only variable displays the frequency
with which hello messages and network validation
messages are transmitted over the network. This
value is determined by the root bridge.
Parsed from file vitalink.txt
Company: None
Module: VITALINK-MIB
This read-only variable displays the frequency
with which hello messages and network validation
messages are transmitted over the network. This
value is determined by the root bridge.
Parsed from file VITALINK-MIB.mib
Module: VITALINK-MIB
Vendor: Vitalink Communications
Module: VITALINK-MIB
[Automatically extracted from oidview.com]
dot1dStpHelloTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This read-only variable displays the frequency with which hello messages and network validation messages are transmitted over the network. This value is determined by the root bridge." ::= { bridgestp 11 }
dot1dStpHelloTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This read-only variable displays the frequency with which hello messages and network validation messages are transmitted over the network. This value is determined by the root bridge." ::= { bridgestp 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.29.1.4.2.11.0 | dot1dStpHelloTime | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.29.1.4.2.1 | dot1dStpProtocolSpecification | 1 | 1 | This read-only variable displays which Spanning Tree algorithm (IEEE 802.1, DEC-compatible) this bridge is using. When this syste… |
1.3.6.1.4.1.29.1.4.2.2 | vBridgeStpConvert802 | 1 | 1 | This is a read-only variable. It is normally used when the network is running in DEC compatible mode (see item 1 on screen 1/2).… |
1.3.6.1.4.1.29.1.4.2.3 | vBridgeStpInterdomain | 1 | 1 | This read-only variable specifies whether or not (true, false) this bridge is to function as an interdomain bridge. An interdoma… |
1.3.6.1.4.1.29.1.4.2.4 | vBridgeStpPriorityCode | 1 | 1 | This read-only variable specifies the root priority (or priority code) for this bridge. If this value is set to 0P3, it is interp… |
1.3.6.1.4.1.29.1.4.2.5 | dot1dStpPriority | 1 | 1 | This read-only variable displays the priority and address of this bridge. |
1.3.6.1.4.1.29.1.4.2.6 | vBridgeStpCostAlgorithm | 1 | 1 | This read-only variable specifies which costing algorithm (dec, ieee) is to be used by this bridge. |
1.3.6.1.4.1.29.1.4.2.7 | dot1dStpDesignatedRoot | 1 | 1 | This read-only variable displays the priority and address of the root bridge. The bridge with the lowest priority becomes the roo… |
1.3.6.1.4.1.29.1.4.2.8 | dot1dStpRootCost | 1 | 1 | This read-only variable displays the cost of the Inlink path to the root. |
1.3.6.1.4.1.29.1.4.2.9 | dot1dStpRootPort | 1 | 1 | This read-only variable displays the ID of the network group that creates the most direct, cost-effective path from this bridge t… |
1.3.6.1.4.1.29.1.4.2.10 | dot1dStpMaxAge | 1 | 1 | This read-only variable displays the amount of time a bridge will wait for a hello message before attempting to find a new inlink… |
1.3.6.1.4.1.29.1.4.2.12 | dot1dStpHoldTime | 1 | 1 | Displays the amount of time a bridge will wait for a hello message before attempting to find a new inlink. This value is determin… |
1.3.6.1.4.1.29.1.4.2.13 | dot1dStpForwardDelay | 1 | 1 | This read-only variable displays the length of time a network group will remain in the pre- forwarding state. Determined by the r… |
1.3.6.1.4.1.29.1.4.2.14 | dot1dStpBridgeMaxAge | 1 | 1 | This read-write variable specifies the Listen interval to be used throughout the network if this bridge becomes the root. Range =… |
1.3.6.1.4.1.29.1.4.2.15 | dot1dStpBridgeHelloTime | 1 | 1 | This read-write variable specifies the Hello Interval to be used throughout the network if this bridge becomes the root. Range = … |
1.3.6.1.4.1.29.1.4.2.16 | dot1dStpBridgeForwardDelay | 1 | 1 | This read-write variable specifies the pre- forwarding interval to be used throughout the network if this bridge becomes the root… |
1.3.6.1.4.1.29.1.4.2.17 | dot1dStpTopChanges | 1 | 1 | Displays the number of times this network group has transitioned from the pre-forwarding to the forwarding state. |
1.3.6.1.4.1.29.1.4.2.18 | vStpGroupTable | 1 | 9 | None |