Used to request range of records from
paLogChronFirst to paLogChronLast
Parsed from file SANMgr.mib.txt
Company: None
Module: SANMgrV1-MIB
Used to request range of records from
paLogChronFirst to paLogChronLast
Parsed from file SANMgrV1-MIB.mib
Module: SANMgrV1-MIB
Vendor: Pathlight Technology Inc.
Module: SANMgrV1-MIB
[Automatically extracted from oidview.com]
paLogChronLast OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "Used to request range of records from paLogChronFirst to paLogChronLast" ::= { agent 16 }
paLogChronLast OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "Used to request range of records from paLogChronFirst to paLogChronLast" ::= { agent 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2935.2.16.0 | paLogChronLast | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2935.2.1 | paIdentify | 1 | 1 | Flash the READY light on the SAN Data Gateway front panel. A non-zero value turns the LED on for the specified number of seconds. … |
1.3.6.1.4.1.2935.2.2 | paReboot | 1 | 1 | Writing a reboot(2) value here causes immediate reboot. |
1.3.6.1.4.1.2935.2.3 | paHealthCheckValue | 1 | 1 | Value in percent of health check tests passed. |
1.3.6.1.4.1.2935.2.4 | paHealthCheckLevel | 1 | 1 | Scrutiny level of health check function. |
1.3.6.1.4.1.2935.2.5 | paHealthCheckInterval | 1 | 1 | Health Check interval in minutes. |
1.3.6.1.4.1.2935.2.6 | paEvRptLevel | 1 | 1 | Used when retrieving Event Log. Events with log level greater than paEvRptLevel are not retrieved. |
1.3.6.1.4.1.2935.2.7 | paEventLogLevels | 1 | 1 | Each of 255 event types has an 8-bit level used when reading log. Currently valid LogLevel range is 0-3. |
1.3.6.1.4.1.2935.2.8 | paTrapThresholds | 1 | 1 | Each of 255 event types has an 8-bit threshold. When the number of events exceeds the Trap Threshold, a trap is generated and sen… |
1.3.6.1.4.1.2935.2.9 | paBaudRate | 1 | 1 | Serial baud rate for SAN Gateway Service Port. Currently, the Agent does not support baud rate change: the rate is hard-coded to … |
1.3.6.1.4.1.2935.2.10 | paEventLog | 1 | 8 | Entry point for the Agent Event Log Table. |
1.3.6.1.4.1.2935.2.11 | paLogSize | 1 | 1 | Number of records in entire event log. (Not just current records since boot.) |
1.3.6.1.4.1.2935.2.12 | paCommand | 1 | 1 | Used for issuing command to SNMP agent. |
1.3.6.1.4.1.2935.2.13 | paLogBoot | 1 | 1 | Absolute index of first log entry at boot. |
1.3.6.1.4.1.2935.2.14 | paLogNCurrent | 1 | 1 | SNMP Get (read) returns number of records since boot subject to viewing level filtering. SNMP Set (write) copies this number of r… |
1.3.6.1.4.1.2935.2.15 | paLogChronFirst | 1 | 1 | Used to request range of records from paLogChronFirst to paLogChronLast |
1.3.6.1.4.1.2935.2.17 | paLogScroll | 1 | 1 | Used to request previous/next range of records event log |
1.3.6.1.4.1.2935.2.18 | paLogFilename | 1 | 1 | Used to save event log to a file. |
1.3.6.1.4.1.2935.2.19 | paEnvironmentState | 1 | 1 | Temperature and Voltage Status of SAN Data Gateway: ********************************** (LSB) bit 0 Auxiliary Power bit 1 Main Pow… |
1.3.6.1.4.1.2935.2.20 | paGatewayFWRev | 1 | 1 | SAN Data Gateway Firmware Revision information. |
1.3.6.1.4.1.2935.2.21 | paGatewayHWRev | 1 | 1 | SAN Data Gateway Hardware Revision information. |
1.3.6.1.4.1.2935.2.22 | paSnmpFWRev | 1 | 1 | SNMP Agent Firmware Revision information. |
1.3.6.1.4.1.2935.2.23 | paRidTag | 1 | 1 | SAN Data Gateway RIDTag. |
1.3.6.1.4.1.2935.2.24 | paSerialNumber | 1 | 1 | SAN Data Gateway Serial Number. |
1.3.6.1.4.1.2935.2.25 | paServerVersion | 1 | 1 | Remote Management software writes Server version information here to customize SNMP Agent behavior. |
1.3.6.1.4.1.2935.2.26 | paProductType | 1 | 1 | Type of SAN device |
1.3.6.1.4.1.2935.2.27 | paVPSEnabled | 1 | 1 | State of ITL Access Control enable. |
1.3.6.1.4.1.2935.2.28 | paLicenseKey | 1 | 1 | Used to pass feature enabling license keys. |
1.3.6.1.4.1.2935.2.29 | paThirdPartyCopyEnabled | 1 | 1 | State of Extended 3rd Party Copy enable. Enabled means that a valid license key has been entered for this feature. |
1.3.6.1.4.1.2935.2.30 | paVPSStatus | 1 | 1 | State of Virtual Private SAN feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. Bit 1 is redundant with MIB … |
1.3.6.1.4.1.2935.2.31 | paThirdPartyCopyStatus | 1 | 1 | State of Extended 3rd Party Copy feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. Bit 1 is redundant with … |
1.3.6.1.4.1.2935.2.32 | paCommandControlLUN | 1 | 1 | Gateway/Router Command and Control LUN |
1.3.6.1.4.1.2935.2.33 | paSanDirectorEnabled | 1 | 1 | State of SAN Director Support for this device. To enable, user must write a valid license key to OID paLicenseKey or enter the li… |
1.3.6.1.4.1.2935.2.34 | paNodeName | 1 | 1 | SAN Gateway Node Name. |
1.3.6.1.4.1.2935.2.35 | paVPMStatus | 1 | 1 | State of Virtual Private Map feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. |
1.3.6.1.4.1.2935.2.36 | paSRSStatus | 1 | 1 | State of SAN Replication Services feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. |
1.3.6.1.4.1.2935.2.37 | paEthernetType | 1 | 1 | Current Ethernet Speed. |
1.3.6.1.4.1.2935.2.38 | paTrapSequenceNumber | 1 | 1 | Sequence number of last trap sent by this SNMP Agent. |
1.3.6.1.4.1.2935.2.39 | paSysNodeNameMode | 1 | 1 | Algorithm used when computing Fibre Channel World Wide Node Name for each port. If the value is sameForEachPort(0), then the Wor… |